My Revo will be here this week. A few days before my 69th birthday I'll have my first nitro car. Talk about a late bloomer! I'm hoping I can get the tune as good as you have your Jato. Thanks for all the informative videos.
Yeah alot a folks are nervouse when comes to the low speed needle but if you want good idle you have to add fuel to it.Great video earl you and hybrid know your nitros i have learned alot from you both see you on the next one.
When the 33 is running good their little rippers. I've never had any problems tuning that engine. They run great. Also on The battery box I shaved the top lid if I'm not mistaking the ridges out of it to give more room
There's a reason one is a LOW speed adjustment and one is the HIGH speed adjustment....that is how you tune a nitro actually any 2 stroke....they all work the same way, an engine is a engine doesn't matter how small or big....I bet the neighbors love when you fire up the Nitros...lol....hey we love it!!!!
I think you could probably lean out the low ..just a little tiny bit and get a little more pop out of it and close your idle gap about the same amount.. I've been working with the tune on my new drag jato build with the RCR modified crank in it. I think I'm also running losi 3.4 carb which is just a little bit bigger on the Venturi side
If I move it lean one tic meaning on a clock one second hand it will double idle again as that the adjustment I showed it the last video 🤔 less then an 1/8th rich stops the double idle 🤔
@@woogienitro on this 13 year old carb I feel turning the screws more then truly needed might just rip an oring but I’m sure your right as I’m no expert but it ran really good and it’s truly more then enough for me with a steady idle no stalling and no hesitation it’s perfect for me at this point intill this carb goes bad 💨💨👍👍👍
Wzup Mr.Moorehead!!!don't know anything about nitros but that Jato sounds awesome. Great tips about tuning...that's why I don't mess with them can't tune. but now I know 😊. Always da man...I you got me thinking 🤔 now '$$$
Sure hope everything ok Earl … get well soon keeping you in my prayers 🙏🙏🙏 and for the record jato sounding great plenty of power like a v8 on a pinto 😂🤣😂
Hey Earl, you're right, it does pay to break in your nitro rc properly if you want them to work right... Absolutely 💯 the best info for a well tuned nitro.. KEEP ON BASHING, OR RACEING! FROM LONDON ONTARIO
Double idle meaning how it kinda hangs at a high speed then drops down to a lower idle? Typically means that the low speed needle is a little lean. Don't be afraid to open the low speed needle and it only takes a little bit to notice a difference. A lot of people make the mistake of leaving the alone. The low speed needle isn't "set it and forget it" at flush (as they call it) with the inner ring. Flush is the factory setting for the low speed needle, that doesn't mean that it has to stay there. A lot of people make that mistake. You have to adjust both needles accordingly.
Hey man! that was a great explanation of how to consider the Low Speed Needle to be mostly just adding or reducing fuel flow. The 2 speed was shifting great too! Yes, as you already know tons of people don't tune the LSN correctly and wind up with a HIGH idle, then blame it on being a bad carb, almost always it's because their LSN is just too LEAN. GReat video!! NitroGang Approved!
I meant to add that you're doing great with tuning now. Hybrid32494 is awesome and very helpful. So are other TH-cam videos though. Continue to do what you're doing but also keep an eye on your temperature and listen carefully to how the engine is performing.
Never had anyone teach me about nitro just trail and error and I’ve never raced nitro professionally so I’m truly not a nitro expert but I do enjoy them and can get them running good for my style of rc running 💨💨💨
great video Earl👊👍
Thanks 🙏
sometume when I wrenching I forget to comment and now I'm commenting on other TH-cam channels now too. great info on the carb adjustments.
Thank you for doing the video and I hope you feel much better and take your time enjoy the hobby like every other day thank you bye-bye
Thanks 🙏
My Revo will be here this week. A few days before my 69th birthday I'll have my first nitro car. Talk about a late bloomer! I'm hoping I can get the tune as good as you have your Jato. Thanks for all the informative videos.
I’m sure you can and knowing that hybrid and others are there to help is cool in the nitro community 👍👍💨💨
@@earlmoorhead5555 yes!! we all here bro!!
Yeah alot a folks are nervouse when comes to the low speed needle but if you want good idle you have to add fuel to it.Great video earl you and hybrid know your nitros i have learned alot from you both see you on the next one.
Awesome
I'm glad to see you got your Jato dialed in! 🔥
She's dialed in for sure. Agreed, you cannot be afraid of the low speed needle. Nitrogang!!
I am impressed how clean you keep your rc’s.
Thanks 🙏
Get well soon, Earl!
Thanks 🙏
Your Jato is running and sounding great!! 💯💯😉
Love it bro that thing rippss , great content Earl!!!
Thanks 🙏
Nice jayto, u keep your toys well 👍👍
Thanks 🙏 I try 💯💨💨
It's running pretty good. Good job. Hope you feel better.
Nice video earl
Thanks 😊
That Jato seems pretty quick!
😳🤔🧐 crazy correlation Earl starts doing nitro and mysteriously gets ill sounds a little Cali Proposition 65 ish to me 😳🤔🧐
Yes fuel been killing me I guess 🤷🏻♂️😜
Happy 4th 🎉🎊🎉🎊
Glad you’re feeling better. Great info as always. Thanks Earl.
Thanks 🙏
You really got that Jato running awesome ..hope you feel better soon man.
Thanks 🙏
Sorry you're not feeling so well. Get better quickly!
Thanks 🙏 been struggling with it for awhile now 👍👍💯💯
When the 33 is running good their little rippers. I've never had any problems tuning that engine. They run great. Also on The battery box I shaved the top lid if I'm not mistaking the ridges out of it to give more room
Good to know 👍💨💨
There's a reason one is a LOW speed adjustment and one is the HIGH speed adjustment....that is how you tune a nitro actually any 2 stroke....they all work the same way, an engine is a engine doesn't matter how small or big....I bet the neighbors love when you fire up the Nitros...lol....hey we love it!!!!
I think you could probably lean out the low ..just a little tiny bit and get a little more pop out of it and close your idle gap about the same amount.. I've been working with the tune on my new drag jato build with the RCR modified crank in it. I think I'm also running losi 3.4 carb which is just a little bit bigger on the Venturi side
If I move it lean one tic meaning on a clock one second hand it will double idle again as that the adjustment I showed it the last video 🤔 less then an 1/8th rich stops the double idle 🤔
@@earlmoorhead5555 back off the idle gap the same amount after you lean it out. It's a washout but on the linger side
@@woogienitro on this 13 year old carb I feel turning the screws more then truly needed might just rip an oring but I’m sure your right as I’m no expert but it ran really good and it’s truly more then enough for me with a steady idle no stalling and no hesitation it’s perfect for me at this point intill this carb goes bad 💨💨👍👍👍
Hope ya feel better soon E man.
Thanks 🙏
I'm gonna get me a Jato real soon
Nice 👍
Great vid earl
Thanks 🙏 brother happy 4th
Wzup Mr.Moorehead!!!don't know anything about nitros but that Jato sounds awesome. Great tips about tuning...that's why I don't mess with them can't tune. but now I know 😊. Always da man...I you got me thinking 🤔 now '$$$
Thanks 🙏
Thanks for the tuning tip 👍 Love the intro's ! It sounds really good and I believe it's tuned perfectly
I’ve said it multiple times I don’t plan on ever getting a nitro. All of your videos recently about them are making them sound better and better
Your videos make me want to buy a nitro rc again. Thanks for the awesome content again. Hope you are feeling better now. Cheers Pete
Thanks 🙏
A really good informative video! And the opening is freaking funny as hell brother! Just get you some Taco Bell.... lmao 🤣😅🤣!
Sure hope everything ok Earl … get well soon keeping you in my prayers 🙏🙏🙏 and for the record jato sounding great plenty of power like a v8 on a pinto 😂🤣😂
Thanks 🙏 been fighting this for awhile 💨💨👍👍
Hey Earl, you're right, it does pay to break in your nitro rc properly if you want them to work right... Absolutely 💯 the best info for a well tuned nitro..
KEEP ON BASHING, OR RACEING! FROM LONDON ONTARIO
Sounds good to me buddy. Happy 4th of july 💯👍
Thanks happy 4th 🔥👍👍
Double idle meaning how it kinda hangs at a high speed then drops down to a lower idle? Typically means that the low speed needle is a little lean. Don't be afraid to open the low speed needle and it only takes a little bit to notice a difference. A lot of people make the mistake of leaving the alone. The low speed needle isn't "set it and forget it" at flush (as they call it) with the inner ring. Flush is the factory setting for the low speed needle, that doesn't mean that it has to stay there. A lot of people make that mistake. You have to adjust both needles accordingly.
Holy crap that is purring like a kitten! Sounds like it's running perfect (: It's a rippah! 😎👍hope you feel better soon boss!
Thanks 🙏
What a great rc! And great advice for the nitro rc community! Love it man👍💪
Doesn't it throw oil all over when it's running rich??
14.9!!!!! Hell Yeah 15K Limitless coming soon!!
She's a rippah!👍
Good job, sounds like you nailed the tune! Happy July 4th to you and you family.👍💯
Thanks happy 4th 🔥🔥👍💨
Jato Baby! Got to love it. Fastest nitro I know of. Mine is a wheelie poppin beast.
Nice
Happy Independence Day!!
🇺🇸 🎆 🍔 🇺🇸 🌭 🥧 🇺🇸
Thanks 🙏💨💨happy 4th
Hey man! that was a great explanation of how to consider the Low Speed Needle to be mostly just adding or reducing fuel flow. The 2 speed was shifting great too! Yes, as you already know tons of people don't tune the LSN correctly and wind up with a HIGH idle, then blame it on being a bad carb, almost always it's because their LSN is just too LEAN. GReat video!! NitroGang Approved!
Thanks 🙏 means a lot coming from you the way I read the manual seeing the flow chart it made perfect sense on the fuel flow and idle 👍💨💨
That Jato really handles great now its totally diled in!!🚀👍🏻
Happy 4th Everyone. Sounds a lot better. Thank's for Sharing Earl 👊🧨👍💯✌
Thanks 🙏
3th 👍🧨🤪😎
1st
Notification squad 💯👍👑
I meant to add that you're doing great with tuning now. Hybrid32494 is awesome and very helpful. So are other TH-cam videos though. Continue to do what you're doing but also keep an eye on your temperature and listen carefully to how the engine is performing.
Thanks 🙏
None nitro guy with all that experience?
I listen and always stick around till the end, but left feeling confused.com
Never had anyone teach me about nitro just trail and error and I’ve never raced nitro professionally so I’m truly not a nitro expert but I do enjoy them and can get them running good for my style of rc running 💨💨💨