Purchased my truck already lifted with bds suspension kit but it has zone upper control arms honestly the truck rides like a dream on 37s so I really have nothing bad to say about Zone
Eeeey how is that? I just ordered one, it should be arriving soon, just wondering. Mine is an add a leaf, I couldn't find a leaf kit on amazon for 4.5 inch. Workin?
I have their 4" kit on my 2002 F250, and with several years of use and abuse I highly recommend Zone. The only thing I did not like was the stacked block rear setup; swapped that out with a couple of PMF blocks and my truck was good to go.
MetalMatt 1776 just picked up a 4inch kit tonight for my 2003 f-250 and it also came with 2 new complete leaf packs for the rear cause the guy didnt want to use the rear blocks, what size tire you running
My dad has zone 3in lift on his 05 Rubicon. No problems with it. Had it installed in Coldwater Michigan at Planet Powersports. Guess guy was right when he said the lift was made down the road lol
Speaking of USA made and small town mid west companies, for your show truck showroom floor cleaning needs, be sure to check out Factory Cat, hand made in Racine Wisconsin USA. 👍🏻😉 Thanks for the info on Zone, I was attracted by their tough looking boxed UCA’s, but now I may look into a whole level or lift kit from them. Cheers!
Mind giving us an update? I’m 98% sure I’m doing 4.5” for my 2014 silverado The 2% is a pro comp 4” lift which is almost twice as much but they give A $300 rebate currently please LMK
I just put the zone adventure series 3 inch lift on my duramax and its great. It drops the diff down 2 inches so the cv angles dont suck, the new upper control arms don't "sit" on the bump stops so theres actually room for the suspension to travel, and the skid plate/brackets are super beefy. Great kit, highly recommend to anyone wanting to level a 2500hd the correct way and not have it ride down the road like a brick.....but yeah zones logo really needs an update
We have 2 2015 F150’s, one 6” zone one 6” bds. Both on 37’s. BDS seems to sit higher just a little. Both trucks drive flawlessly on road and off! You can’t go wrong with either. Zone does have that 60k mile warranty and a lower price point for basically the exact same thing.
I have a 6" Zone with 2" body spacers. Damn shop said they couldn't crank the torsion keys any more and now the back sits higher than the front making it look like crap. Pictures of my truck is on my YT channel.
Hey Custom Offset guys, I'm turning my 2000" F150 into a full camper: 320W solar power, 2000 inverter stove, sink, microwave fridge and bed. I had a A.R.E. 32" aluminum cap installed which I hope added weight to bring my back down. By time I build up the camper, I'm assuming it might add 300lb to the back. If that doesn't bring the back down to match the front, can I add in a bigger spacer to the front to bring it up to the height in the back? Also, what is your honest opinion about wheel spacers? I did the dollar bill test, and I'd say it's about 4". I can't stand how the front tires stick out further than the rear tires. Not sure if I need to bring down the back up raise the front - 6" lift with 2" body spacers. I'd really appreciate it it you checked out my build video on my channel and give me some advice. I don't mind the road trip to where ya'll are. Thanks in advance from Texas.
@@ironicchannelname6457 Got my 3" Zone on the Bumble Jeep and except for a shipping snafu and some missing hardware (U-bolt nut and 2 washers) XJ looks great. Did a little ff-road jaunt and it did great.
Always super informative. I put a 3.5 rough country knuckle kit in my 2018 and it’s pretty sweet if I get another truck I may just have to test out a zone
I have just enough money for my 1989 rusty gmc , rough country 6 inches suspension lift and a zone offroad 3 inch body lift!!!!!!!!😂 so happy because because ! When girls love respect and respect old trucks, that's true romance
Can you add a BDS rear leaf spring kit to the zone 4.5"? Like Zone a lot but want the added stability of the BDS rear end. No ass sagging over here when towing.
how is it? did you upgrade to the fox shocks? I own a colorado and am thinking about doing the zone lift but I want to know if its going to hold up off road
You said zone makes a 6.5 inch lift, I only saw a 5 inch for my 09 tundra.. am I looking in the wrong place or do they only offer a 5 inch for that year tundra ?
Have a 6.5 zone on my 2018 ram 2500. To be absolutely honest, i wish whoever put it in paid the lil extra and got the BDS. Or atleast proper shocks and stayed away from shock extenders. Had to cut the shock extenders out to replace shocks. Rear trac bar drop bracket snapped pulling off highway. Less then 95,000kms on my truck and just ordered pinion bearings for it. Have been contemplating taking the kit out and running something else.
It's kind of funny how many trucks I see lifted and sparkling. I've yet to see a lifted truck parked by my stock truck while I'm getting a load of wood on the side of a hill. Don't get me wrong. I could use a three inch lift to avoid the occasional scraping, but it would be out of necessity
Can anyone remember when Hall's had the lumber yard alone with the off road store, I may be confusing them with Hamilton FB, but I thought in the'70 they're together. B
This might be a common question but what would be a good 10 inch lift kit for a 2015 Ford F-250? I just purchase a truck and I’m looking to do a lift kit
So I think he said this- can someone confirm? ZONE doesn’t screw up the trac control, stability control, etc, just like BDS, right? Both companies keep that stuff functioning properly?
Some kits are applicable with them and unfortunately others are not. But most BDS kits will come with the Fox shocks. BDS is also the big brother company of Zone which is a huge plus! You can take a look at our BDS kits here: www.customwheeloffset.com/store/suspension?&brand=BDS%20Suspension
What about using them on a stock suspension truck ? I have 3" lift spindles, my control arms are not raised. Is there any benefit on running them on a stock truck as a replacement for the stock UCAs or will they mess up my caster, etc?
We are proud to be distributing Zone Offroad in Australia. We run the rigs pretty heavy over here so we've collaborated with Zone to use their components but with our locally built 2.5" Remote Res shocks, to help provide the next level ride for these American trucks in Australia. Keep up the good work!
Brian White it’s good business on their end numbers wise. Some people understand the product is basically the same and some don’t, for those who don’t they’ll buy the more expensive kit just because the brand on it.
Ha, I just bought some Zone Offroad stuff and was wondering where this video was going. I try to stay away from RC (China). Happy to see that Zone is the real deal.
It’s like a difference of 400-500 from RC to Zone. Ill support local and quality over saving 500 bucks. Thx for the outstanding vid. And LMAO at the extra inch of lift. Real reason.... cuz.... chevy wheel wells. Been there, done that
Hey Banker and CO, ever had issues with the ball joints detiorating after a year or so on the UCA kit 3.5" lift for a 2008 Chevy 2500HD diesel crew cab?
@@CustomOffsetsTV thanks for the response. I got a kit with less than 15000 miles, hardly tows, and already had to replace passenger side ball joint. Wasn't covered, had to buy through Zone, replaced last year. 13000 miles later, drivers side ball joint needed replaced. Did I just get a bad batch of UCAs? They said they were Moog but I couldn't buy it from any auto parts store, only from Zone. Didn't know if you guys encountered any thing like that.
Can a zone lift for a 4wd Silverado fit a 2wd Silverado between the years 14-18. I’m new to the lifted truck scene in wanting to go with a 35 tire on stock rims for a moment and a zone 4.5 lift with the fox shocks are they adjustable for the rear.
We recommend running the lift kits that are specific to YOUR specific truck to insure that it fits! Send us an email to info@customoffsets.com and we can help get you the lift kit you are looking to run!
Custom Offsets I was thinking of going with a 3in kit from them and I was wondering if y’all had any experience with their kits? Like if they are good products or not. I have a 2008 Dodge Ram 2500 4x4 diesel.
Hey....I have a 2011 LML that I wanna Put the 3” lift shock on to get some wheel clearance in the front....do u think it will work ?....My truck is Not lifted
I have a 2019 Silverado LTZ 4x4 1500. Looking at 6" kits and can't quite decide between Zone, Rough County, or Superlift. I do like the explicit warranty statement from Zone so leaning that way. Any other info to help decision would helpful.
Well, that settles it. You just sold a Zone kit to me with this video. Thanks.
Tyler Jones I got the 6.5 for my GMC Sierra I love it it rides damn near better than stock imo
Same I just installed the zone 4.5” kit on my Jeep it rides 10000x better
I've been thinking about getting a 2-inch lift for my ZJ.
Ditto I'm ordering the Adventure Series 2 kit for my 2016 ram 1500
Did you ever install the Zone lift kit? If so how do you like it?
Changed my whole mind on zone, I'll back a Midwestern company any day
I just did
Brady Butler im from coldwater and never knew about that😂
Doesn't make a difference when that rc sags and zone doesn't. Ya lose the inch and some.
That's what my truck is running. Glad I could help keep jobs here in the states..
Maybe a Truth about Full Throttle Suspension?
Does Banker own a pair of jeans without holes? He just keeps shopping at the thrift store? Lol. Love the series. Very informative.
Dewey, he's just rough on clothing!
Custom Offsets doing what? It's not like he works hard. Lol.
He is saving money for the bds kit
Purchased my truck already lifted with bds suspension kit but it has zone upper control arms honestly the truck rides like a dream on 37s so I really have nothing bad to say about Zone
Got a Zone 6.5 lift kit from you guys this past winter and I’ve been loving it ever since.
On a ram ??
Ford??
Chevy??
I'm in Michigan just had my 4.5" lift come in last week for my xj🖐
Eeeey how is that? I just ordered one, it should be arriving soon, just wondering. Mine is an add a leaf, I couldn't find a leaf kit on amazon for 4.5 inch. Workin?
How bout an update
I would go with Zone but they only make one actual suspension lift for the 2016 Colorados and I would rather not go 5.5 inches of lift... RC it is
Why not are you scared?
Sounds like a truck issue. Guarantee. The Tacoma has way more options.
I have their 4" kit on my 2002 F250, and with several years of use and abuse I highly recommend Zone. The only thing I did not like was the stacked block rear setup; swapped that out with a couple of PMF blocks and my truck was good to go.
MetalMatt 1776 just picked up a 4inch kit tonight for my 2003 f-250 and it also came with 2 new complete leaf packs for the rear cause the guy didnt want to use the rear blocks, what size tire you running
Thanks for the info guys. going to purchase this kit for my 2000 f250. Now i know what else to get.
My dad has zone 3in lift on his 05 Rubicon. No problems with it. Had it installed in Coldwater Michigan at Planet Powersports. Guess guy was right when he said the lift was made down the road lol
Great information,glad manufacturing is here!
Thank you thank you. I just stumbled across zone tonight and needed info. You just sold them another kit when I nail down the truck I want to buy.
did u get something?
I put zones 3 inch on my 96 xj and love it.
Was between rc and zone now that I know I can drive an hour and see the company I'm sold on zone gotta support local !!
Always support local if you can!
Hell yes local is always better. Im bout an hour and half away so def local.
Speaking of USA made and small town mid west companies, for your show truck showroom floor cleaning needs, be sure to check out Factory Cat, hand made in Racine Wisconsin USA. 👍🏻😉 Thanks for the info on Zone, I was attracted by their tough looking boxed UCA’s, but now I may look into a whole level or lift kit from them. Cheers!
I've got a zone 4 1/2 lift on my 2015 Silverado and it rides great. Also has a good stance
Mind giving us an update?
I’m 98% sure I’m doing 4.5” for my 2014 silverado
The 2% is a pro comp 4” lift which is almost twice as much but they give A $300 rebate currently please LMK
I love these episodes
I just put the zone adventure series 3 inch lift on my duramax and its great. It drops the diff down 2 inches so the cv angles dont suck, the new upper control arms don't "sit" on the bump stops so theres actually room for the suspension to travel, and the skid plate/brackets are super beefy. Great kit, highly recommend to anyone wanting to level a 2500hd the correct way and not have it ride down the road like a brick.....but yeah zones logo really needs an update
I have an 08 lmm. You answered my cv shaft angle question. Thank you!
Literally everything is made in the US, well, except all these critical fasteners.
CO2's exhaust tip is dirty. Someone get on that it's bothering me.
Maybe do a truth about the McGaughys lift next.
We have 2 2015 F150’s, one 6” zone one 6” bds. Both on 37’s.
BDS seems to sit higher just a little.
Both trucks drive flawlessly on road and off!
You can’t go wrong with either. Zone does have that 60k mile warranty and a lower price point for basically the exact same thing.
Are they different in the front? I saw zone uses spacers in the front does BDS do this or they replace the strut?
I have the adventure series 3” with bilsteins and love it!
06R6Rider Bilstein all the way. I have them on my 03 wj, 5in lift long arms, 33's
I'm old enough to remember when they were Hall's Off road, long time ago.
I did not know that. As a michigander i am thrilled i bought zone uppet control arms. Did not know they were made here until this video.
This video settled it for me. Zone it is!
I had questions about wether to buy their lift kit for my JKU but you sold me on it. Thank you for the well rounded history on the company.
I actually like the zone logo... plus greens my color of choice... but haven’t come up with a beefy enough look for me yet
I have a 6" Zone with 2" body spacers. Damn shop said they couldn't crank the torsion keys any more and now the back sits higher than the front making it look like crap. Pictures of my truck is on my YT channel.
Hey Custom Offset guys, I'm turning my 2000" F150 into a full camper: 320W solar power, 2000 inverter stove, sink, microwave fridge and bed.
I had a A.R.E. 32" aluminum cap installed which I hope added weight to bring my back down. By time I build up the camper, I'm assuming it might add 300lb to the back. If that doesn't bring the back down to match the front, can I add in a bigger spacer to the front to bring it up to the height in the back?
Also, what is your honest opinion about wheel spacers? I did the dollar bill test, and I'd say it's about 4". I can't stand how the front tires stick out further than the rear tires. Not sure if I need to bring down the back up raise the front - 6" lift with 2" body spacers. I'd really appreciate it it you checked out my build video on my channel and give me some advice. I don't mind the road trip to where ya'll are. Thanks in advance from Texas.
Thanks for the info! Looking forward to getting 3" lift for my 95 XJ.
Got a 6.5 inch from zone on my xj I love it! I've beaten the absolute hell out it and it hasn't let me down
@@ironicchannelname6457 Got my 3" Zone on the Bumble Jeep and except for a shipping snafu and some missing hardware (U-bolt nut and 2 washers) XJ looks great. Did a little ff-road jaunt and it did great.
Might as well do BDS next. Zone's big brother.
Coulter Kimbrell they did....
I finally got my 4in lift from Zone installed on my 2018 F150 and it literally rides like stock
Do Cognito next
Always super informative. I put a 3.5 rough country knuckle kit in my 2018 and it’s pretty sweet if I get another truck I may just have to test out a zone
I'm actually doing the 6inch zone lift on my 18 this weekend
how do you like the kit?
I read it as "THE TRUTH ABOUT AUTO ZONE" & got my tea...Pfft
I love my zone kit
I have just enough money for my 1989 rusty gmc , rough country 6 inches suspension lift and a zone offroad 3 inch body lift!!!!!!!!😂 so happy because because ! When girls love respect and respect old trucks, that's true romance
Do one on Cognito
Love the videos! Can you guys do one on bulletfroofs 4 link lift kit?
Will be buying this for my Ram.
Great choice! Take a look at our Zone lifts here!
bit.ly/2XgGZzQ
Can you add a BDS rear leaf spring kit to the zone 4.5"? Like Zone a lot but want the added stability of the BDS rear end. No ass sagging over here when towing.
Wanted to watch this before I clicked "buy it now" . Sold another kit right now.
McCaughys. Nuff Said
Here in cal... hmm pro comp boarding... or cool zone?? I choose zone
Def going with a zone
I've got a zone level kit on my Colorado, granted it's no 6 inch kit but the truck still rides great.
how is it? did you upgrade to the fox shocks? I own a colorado and am thinking about doing the zone lift but I want to know if its going to hold up off road
Do The Truth About McGuaghy’s
?
superlift suspension is the best bang for your buck and they have been around since the 70s
Does zone make a lift for a 02 3500hd dually? Does the 2500hd work?
Appreciate the video
You said zone makes a 6.5 inch lift, I only saw a 5 inch for my 09 tundra.. am I looking in the wrong place or do they only offer a 5 inch for that year tundra ?
We might be able to get a 5 inch for you. Email us at info@customoffsets.com
Possibly getting a zone lift from y’all for a graduation gift to go on my 03 Sierra 1500. Can’t wait to find out
Do mcgaughys
Have a 6.5 zone on my 2018 ram 2500. To be absolutely honest, i wish whoever put it in paid the lil extra and got the BDS. Or atleast proper shocks and stayed away from shock extenders. Had to cut the shock extenders out to replace shocks. Rear trac bar drop bracket snapped pulling off highway. Less then 95,000kms on my truck and just ordered pinion bearings for it. Have been contemplating taking the kit out and running something else.
love the vids keep em coming.. was gonna get a rough country but this made me change my mind
I like the tribal logo...our people better get tribal or we are going to disappear
What about ready lift ??
I like the logo
It's kind of funny how many trucks I see lifted and sparkling. I've yet to see a lifted truck parked by my stock truck while I'm getting a load of wood on the side of a hill. Don't get me wrong. I could use a three inch lift to avoid the occasional scraping, but it would be out of necessity
I mainly agree which is why I’m gonna go for the 4.5” not the 6.5” I actually use my truck for work and want to start doing agriculture
i almost bought the rc lift but i have heard nothing but good things about zone so 2 days my 4.5 lift from zone will be here :)
Good choice they say RC has shit shocks
crypt walk
Mind giving us an update how good the kit is?
Can anyone remember when Hall's had the lumber yard alone with the off road store, I may be confusing them with Hamilton FB, but I thought in the'70 they're together. B
This might be a common question but what would be a good 10 inch lift kit for a 2015 Ford F-250? I just purchase a truck and I’m looking to do a lift kit
Shoot us an email to info@customoffsets.com and our suspension team can help you out Ricky
What upgraded shocks can i put on my 2016 dodge diesel on a zone 6 5 lift
Please send an email to info@customoffsets.com and they should be able to tell you what shock upgrades would work best for you!
So I think he said this- can someone confirm? ZONE doesn’t screw up the trac control, stability control, etc, just like BDS, right? Both companies keep that stuff functioning properly?
Correct! -Fuller
Sounds like reasons they will use to raise prices.
What’s the difference in quality between zone and skyjacker?
Send an email to info@customoffsets.com if you want the quality difference information
I would run the Zone lift... but on a 01-02 Silverado 2500HD, their kits will not allow the use for 16x10 wheels.
Ordered my Zone kit for a 2017 Ram 2500 on a Sunday and received at my door on Tuesday. Everything looks great also.
Do a video on the best budget companies. Like rims, tires, lift
We have been Eric! Check our youtube out for more videos on budget setups!
I don;t see any options for Zone kits to add Fox shocks on your site or theirs
Some kits are applicable with them and unfortunately others are not. But most BDS kits will come with the Fox shocks. BDS is also the big brother company of Zone which is a huge plus! You can take a look at our BDS kits here:
www.customwheeloffset.com/store/suspension?&brand=BDS%20Suspension
More banker
Looks like I'm going with RC, Zone doesn't appear to have a 4" long arm kit for the WJ grand cherokee. They got a decently priced 4" coil lift tho
Cognito vs Zone Upper Control Arms... which should I buy ?
Neither will disappoint!
What about using them on a stock suspension truck ? I have 3" lift spindles, my control arms are not raised. Is there any benefit on running them on a stock truck as a replacement for the stock UCAs or will they mess up my caster, etc?
Keep this Sh*t Coming!!
When you guys gonna so a zone vs rubicon lift video?
So a Zone kit can be upgraded to Fox shocks? All the way around? Hmmmm, might just have to get a 6" for my 150
Fox shocks owns bds and zone
Do they put any istruction or assembly if we want to install it on our own ??
Yes any lift kit you buy brand new will come with instructions on how to install it
We are proud to be distributing Zone Offroad in Australia. We run the rigs pretty heavy over here so we've collaborated with Zone to use their components but with our locally built 2.5" Remote Res shocks, to help provide the next level ride for these American trucks in Australia. Keep up the good work!
So why wouldn't bds just offer a cheaper product instead of having a whole new name for the cheaper kits?
Brian White it’s good business on their end numbers wise. Some people understand the product is basically the same and some don’t, for those who don’t they’ll buy the more expensive kit just because the brand on it.
What kit would be better for a 2020 Chevy 3500 hd zone or rough country. Looking to make the purchase this next week
Both are pretty much the same in quality and popularity so it would come down to personal preference
Ha, I just bought some Zone Offroad stuff and was wondering where this video was going. I try to stay away from RC (China). Happy to see that Zone is the real deal.
That’s why I bought the zone 6.5 for my 2016 Silverado
It’s like a difference of 400-500 from RC to Zone. Ill support local and quality over saving 500 bucks. Thx for the outstanding vid. And LMAO at the extra inch of lift. Real reason.... cuz.... chevy wheel wells. Been there, done that
Hey Banker and CO, ever had issues with the ball joints detiorating after a year or so on the UCA kit 3.5" lift for a 2008 Chevy 2500HD diesel crew cab?
No we havent heard of any issues with the balljoints from that kit
@@CustomOffsetsTV thanks for the response. I got a kit with less than 15000 miles, hardly tows, and already had to replace passenger side ball joint. Wasn't covered, had to buy through Zone, replaced last year. 13000 miles later, drivers side ball joint needed replaced. Did I just get a bad batch of UCAs? They said they were Moog but I couldn't buy it from any auto parts store, only from Zone. Didn't know if you guys encountered any thing like that.
Can a zone lift for a 4wd Silverado fit a 2wd Silverado between the years 14-18. I’m new to the lifted truck scene in wanting to go with a 35 tire on stock rims for a moment and a zone 4.5 lift with the fox shocks are they adjustable for the rear.
We recommend running the lift kits that are specific to YOUR specific truck to insure that it fits! Send us an email to info@customoffsets.com and we can help get you the lift kit you are looking to run!
Custom Offsets ok thanks will do
Installed alot of zone kits, they are amazing
William Neigum really so you had nothing but great things about these lifts?
santanerox for a cheap lift kit they are amazing. stupid and ugly logo but thats about it
3:28 😂😂😂 ooh roastedd
FROM MICHIGAN
I agree, get rid of the logo. Other then that Zone products are great.
Do y’all have any experience with Dodge off road lifts?
What can we help ya with Joseph
Custom Offsets I was thinking of going with a 3in kit from them and I was wondering if y’all had any experience with their kits? Like if they are good products or not. I have a 2008 Dodge Ram 2500 4x4 diesel.
Hey....I have a 2011 LML that I wanna Put the 3” lift shock on to get some wheel clearance in the front....do u think it will work ?....My truck is Not lifted
I can tell you all dont get much sun up there because you sure have some pretty skin
Did a zone 3" and fox shocks on my minty 2002 Sahara TJ... w mammoth wheels n 33" tires. It's sick
I didnt realize they were in Coldwater MI, I'm only an hour away lol
did Zone have kit for yukon 2015 4.5 to 6 inches lift?
Check our zone kits out here Kevin - bit.ly/2I7R3nb
What about King shocks
Alejandro Castro Yes - I’m wondering the same thing.
So if thier owned by bds does zone offer the same warranty?
I have a 2019 Silverado LTZ 4x4 1500. Looking at 6" kits and can't quite decide between Zone, Rough County, or Superlift. I do like the explicit warranty statement from Zone so leaning that way. Any other info to help decision would helpful.