So.. you prefer TA technix or JOM blueline? "I use the car daily and sometimes in a month, i want to have some fun at cornering roads or at snakie 🐍 roads" . Here in Greece 🇬🇷 JOM costs 329€ and the TA Technix costs 429€. Thanks!
Nice video man, ive had the Ta technix before and now have the blue jom street coilovers and the ride quality is a lot better in them, a lot less bouncy than the ta technix and on the JOM coilovers i have you can preset your spring load and then set the height you want unlike the technix where the more you tighten the spring the lower it goes
Coilovers are uncomfortable simple. Tried 5 different sets including KWs. A good spring and struts setup(Bilstein preferably) is better. Not everyone wants to track their car.
Planning to buy these but I'm uncertain if I need to buy reinforcement for the struts and also a camber/caster adjustment plate for the front. Is all that necessary or could I just put the coils and new drop links on and not ruin my E46? Thanks in advance :)
What's up bro, I had the coilovers in my car for over a year without any reinforcement and I didnt run into any trouble with it. However if your budget allows it would be a good idea to invest in some especially if your planning to keep your car long term. And camber plates only if you really need to dail in your suspension 100% again I didn't have any on my car:) Goodluck👍🏻
@@Need4vtec with me has been a nightmare since i bought them ! worst piece of crap german technology ! don't do the same mistake i did , better save money and buy something decent . i have changed this for my old h&r coilovers , sadly one of them broken , just to give you folks a clue , the came in the h&r was about 4cm round , in the TA Technix Coilovers is about 1.5cm round , looks like an acessory for a kid's car . no joke !
Alright mate, enjoying the 335i I hope! Just a quick one, I am looking at getting some new alloys for my E46 coupe with the same widths but in 19s. Anyway, did you have to use spacers to stop the tyres rubbing the coilovers?
sold the car back in march, no issues with the coilovers till then also met up with the new owner few months ago and they were still holding up good, no issues, solid choice for budget coilovers
hey bro. No bro i dont have the angle lights on mine, but i was looking into it at some sage. I know if you get just the rings, then you will have to split the headlights in order to install them. I never tired doing that because im just not good with stuff like that:) but you can also find full aftermarket headlights with angel eyes fitted already. Really up to you witch one you choose.
Hi bro i have an mx5 mk2.5. Im on lowered springs right now. My front end is okay but my rear is too high. Do you recommend me these coilovers? Only buying for slam
What's up bro, yea I think there not bad for the price. I had them in my e46 for over a year and never had any issues with them. Think you should be fine unless your doing some mad driving😅
nice i bought a e46 yesterday and i want to completely slam it.. are the ta technix dampers shorter than the original? i might only drive with dampers only and no springs
Damn that's pretty slammed, don't think the coilovers go that low, but you can get the super low version. There a bit more expensive but they go pretty low
I bought TA technix. I have not installed it since I was insecure. I am new to coils and lowering and car mods for that matter. I am going to put them on my daily driver/grocery getter. Audi A4 S-line B7. I only drive short distances except from when visiting family, which is twice a year. It's always asphalt or how to spell it. Tarmac. Would it work? Never offroading or things like that. Always tarmac. I drive top 1000km/year. Answer would be lovely. Thank you. Nice video!
In Croatia we have bad roads, I could never have coil-overs since it is my every day car, I run now Bilstein B8 sprint shock absorbers, what do you think about that ?
I can vouch for these, have them on over two years now, no problems at all, hard but the handling you get justifies them,
Cheers bud.
What a legend for not having intro
Such a nice guy and one of the most beautiful e46 i have ever seen
Thank you bro, appreciate it👌
I miss his videos man
Great review! You definitely wouldn’t think it’s that cheap to put your car on coilovers looks really well too!
+Irishcarspotting YT thanks bro. Yea very affordable if your looking to lower you car.
Did you notice a different in handling at all?
+Irishcarspotting YT yea definitely less body roll in the corners. Original suspension it's just too soft.
I just got ta Technix coilovers for my b6 Passat. Great coilovers
So.. you prefer TA technix or
JOM blueline?
"I use the car daily and sometimes in a month, i want to have some fun at cornering roads or at
snakie 🐍 roads" .
Here in Greece 🇬🇷
JOM costs 329€
and the
TA Technix costs 429€.
Thanks!
How is the quality ride?? Did you have any problems until now??
Nice video man, ive had the Ta technix before and now have the blue jom street coilovers and the ride quality is a lot better in them, a lot less bouncy than the ta technix and on the JOM coilovers i have you can preset your spring load and then set the height you want unlike the technix where the more you tighten the spring the lower it goes
+Erikas Nav thanks bro, yea I heard there better quality then ta Technix, should've done more research before I got my coilovers😅
Hey are the coilovers “double” springs, so 1 small spring and 1 big spring on one shockabsorber?
Yes sir. It's a dual spring set up. Smaller spring on the bottom and larger on the top👍
Did you take the small spring out before mounting?
No. The shock comes reassembled and you just install it as is
Thank you, you made a good video
Class video! Very informative! Are you based in Ireland? Noticed the Irish reg 🇮🇪
Thanks man appreciate it 🙌
Indeed I am☘
I have an e46 and try to installed a ta Technix...doesnt work
Is the ride quality bad ?
Coilovers are uncomfortable simple. Tried 5 different sets including KWs. A good spring and struts setup(Bilstein preferably) is better. Not everyone wants to track their car.
Very well done Civic Coupe!
Which headlights are those? They are super clean.
Those are the oem facelift headlights
Are they just one piece for coupes?
Yeah one peace headlights on the facelift coupe, and two peace on the saloon👍🏻
Planning to buy these but I'm uncertain if I need to buy reinforcement for the struts and also a camber/caster adjustment plate for the front. Is all that necessary or could I just put the coils and new drop links on and not ruin my E46? Thanks in advance :)
What's up bro,
I had the coilovers in my car for over a year without any reinforcement and I didnt run into any trouble with it. However if your budget allows it would be a good idea to invest in some especially if your planning to keep your car long term. And camber plates only if you really need to dail in your suspension 100% again I didn't have any on my car:)
Goodluck👍🏻
@@Need4vtec with me has been a nightmare since i bought them !
worst piece of crap german technology !
don't do the same mistake i did , better save money and buy something decent .
i have changed this for my old h&r coilovers , sadly one of them broken , just to give you folks a clue , the came in the h&r was about 4cm round , in the TA Technix Coilovers is about 1.5cm round , looks like an acessory for a kid's car .
no joke !
That car is beautiful.
Alright mate, enjoying the 335i I hope! Just a quick one, I am looking at getting some new alloys for my E46 coupe with the same widths but in 19s. Anyway, did you have to use spacers to stop the tyres rubbing the coilovers?
Yea so far really enjoying it man😅 yea I had to use a spacer in the front, but 5mm did the job👍🏻
Good to hear! Okay thanks mate, very helpful. Going to get myself a set of these coilovers I think
No worries man, goodluck with getting the coilovers👌
Still holdin up bro ?
sold the car back in march, no issues with the coilovers till then also met up with the new owner few months ago and they were still holding up good, no issues, solid choice for budget coilovers
What a car😍
Hi mate i have the exact same car as u, i was wondering have u got angle lights on this one? Is so was it hard to fit ???
hey bro. No bro i dont have the angle lights on mine, but i was looking into it at some sage. I know if you get just the rings, then you will have to split the headlights in order to install them. I never tired doing that because im just not good with stuff like that:) but you can also find full aftermarket headlights with angel eyes fitted already. Really up to you witch one you choose.
GEORGEJEXTER Hi, I also have the same and would recommend the angel rings from SSDD motorsport.
Thanks for info
What are the wheel sizes, name of the rims and size
The wheels are Dare Rs. 18x8.5 front 18x9.5 rear
Hi bro i have an mx5 mk2.5. Im on lowered springs right now. My front end is okay but my rear is too high. Do you recommend me these coilovers? Only buying for slam
What's up bro, yea I think there not bad for the price. I had them in my e46 for over a year and never had any issues with them. Think you should be fine unless your doing some mad driving😅
@@Need4vtec cheers bro thank you. Happy new year, hope you buy a miata as well😛
Happy new year to you to bro🙌
And who knows maybe one day😁✌
What’s the offset on these wheels?
Thanks for the video! I see that its posted over an year ago. How did they keep up?
Sold the car like 6 months after making that video, they were fine until then
Hey man what kind of wheels are you running?
Dare RS
Hey bro, could you please link where you got the coilovers ?
What's up man, I got them from MCG in kells. I'm pretty sure you can find them on their website👍🏻
Got mine on ebay,, APT parts Germany, quick delivery.
how much more low do you think you can get if you remove the back springs?
I'd say maybe one or 2 inches,
I'm planning to get the same coilovers for the new e46 project I just got so I'll definitely test it out👍
nice i bought a e46 yesterday and i want to completely slam it.. are the ta technix dampers shorter than the original? i might only drive with dampers only and no springs
You need the springs on if you want to drive it😅 in the back you can remove the spring adjuster, that's what could give you the extra inch.
th-cam.com/video/mA6uDE-7Ioc/w-d-xo.html
Damn that's pretty slammed, don't think the coilovers go that low, but you can get the super low version. There a bit more expensive but they go pretty low
_"caweelauwverse"_
do you have coilovers with hardness adjust or without
ta coilovers are so hard may as well just ride full on pumpstops
What wheels were they?
Dare Rs
Need4vtec Thanks man, seriously quick reply!
No problem👍🏻
Your accent is fucking mesmerising.
Is there a website I can get this at?
I bought TA technix. I have not installed it since I was insecure. I am new to coils and lowering and car mods for that matter. I am going to put them on my daily driver/grocery getter. Audi A4 S-line B7. I only drive short distances except from when visiting family, which is twice a year. It's always asphalt or how to spell it. Tarmac. Would it work? Never offroading or things like that. Always tarmac. I drive top 1000km/year. Answer would be lovely. Thank you. Nice video!
i want an e46 so much my dream car 😍👌
E36 is much better car 🚙
If Miami didn’t have butchered roads I’d do it
Get the springs atleast
what wheels are those bro damn?
Dare RS
@@Need4vtec What size?
18x8.5
18x9.5
What part of Ireland are you from?
Dublin:)
Need4vtec Good on ya! Enjoyed your video! Ta!
Thanks buddy appreciate it
In Croatia we have bad roads, I could never have coil-overs since it is my every day car, I run now Bilstein B8 sprint shock absorbers, what do you think about that ?
Yea very comfortable shocks, my friend has them on a Honda accord cl7.
Btw been to zadar last summer. Lovely city👌
Its nice in summer :D, I see you sold the car, what are you up to now ?
Looking for a nice 335i in the meantime I'm fixing my civic:)
Oh, that is nice, indeed, good luck :)
What is rims specs inc, ET, J?
18x8.5 front 18x9.5 rear.
I'm not 100% sure on the offset but I think it's +22 front +38 rear
Need4vtec any spacers on the wheels?
@@georgesmbyd6603 5mm on the front to clear the strut
have they blown up yet
Hello from Romania.
+Eon Dub Hello brother:)