The Common Types of Steel Connections
ฝัง
- เผยแพร่เมื่อ 26 ก.ค. 2024
- There are many types of Steel Connections, each of them has benefits and drawbacks. as a structural engineer is important to understand how to design steel structures and the design of steel framing is all about the connections. This video goes through the common types of Steel connections along with the benefits and drawbacks of each of these steel connection types.
Steel connections fit into different categories pinned, semi-rigid, fixed and bearing.
What to watch next
Golden Rules of Steel Design • The Golden Rules of ho...
Rules of Thumb Concrete Design • The Rules of Thumb Con...
The Rules of Thumb Steel design • The rules of thumb for...
My Engineering Journey • My Engineering Journey...
💡
My name is Brendan, and I am a structural engineer with over 15 years of experience in Australia. I have a wide variety of projects, from very small to some of the biggest in the southern hemisphere. I have a passion for good structural design and teaching/mentoring.
This channel is to share my passion for engineering and provide entertaining short clips on:
- tips for young engineers on progressing their careers
- anyone needing a refresher on any design element
- design approaches
- Review past engineering failures to improve structural knowledge
💡
📧LinkedIn Profile: / brendan-hasty-48a40a3b
👍Support the channel on Patreon: / brendanhasty
or Donate Directly via Paypal paypal.me/BHEngineering
🔴
Disclaimer: Some of the below links are affiliate links as an Amazon Associate and other affiliate programs; I'll earn a small commission from qualifying purchases at no additional cost to you.
🔴
Software
SkyCiv geni.us/SkyCiv
📚Recommended Books for engineering Communication
Try Audible Premium Plus for free amzn.to/36B4pm0 up to 2 free books
Concrete Structures Warner geni.us/ConStruct
Steel Designers' Handbook geni.us/SteelHand
Soft is the new Hard geni.us/SoftHard Also on Audible
bringing back the fun to engineering.
Why Buildings Fall: How Structures Fail geni.us/WBFD
Structures: Or Why Things Don't Fall geni.us/WBDFD
🎥home office
kit.co/Brendan_hasty/engineer...
MX Master 3 geni.us/MXmo
Logitech K580 White geni.us/LogiK580
Samsung 32 Curved geni.us/rAIO
Philips 32 4k geni.us/32Phillips
Zbook Dock geni.us/ZDock
Zbook geni.us/Zbook
🎥Gear and Video Editing
kit.co/Brendan_hasty/youtube-...
Rode VideoMic Pro+ Microphone geni.us/RVMP
New 660 LED Video Light geni.us/N660
Neewer 480 RGB Led Light geni.us/N480
Sony A7 SIII geni.us/2X1kwK
camera Samsung S20 geni.us/SS20
🎥Video Editing
AMD Ryzen 9 3900X geni.us/HVrKeZz
MSI Meg X570 geni.us/kwY70ua
RTX 2080 Super Gaming windforce geni.us/O1AC
Samsung 970 PRO 1TB geni.us/SPR70
Fractal Design Define 7 geni.us/FD7B
🎥SEO tool
Tubebuddy www.tubebuddy.com/BHEngineering
![โกหกเธอทั้งนั้น (Pinocchio) - SERIOUS BACON [Official MV]](http://i.ytimg.com/vi/P1HhTYwrR5A/mqdefault.jpg)
This is by far the most valuable video out there. You just don't learn these things in university as I've learned these things through dealing with contractors or from a superior. Thanks for sharing your valuable experience with us!
Hi David, Glad that you found it valuable. I hope to keep delivering great content
Hi Brendan, I just came across your channel and it’s been so helpful. Keep up with the great work!
Hi David, Thanks for the support.
Right on, you're so prolific in spreading good advise 👍👍
Thanks for the support Pejman.
Great content. keep it up thanks
Another, great video. Thanks.
Thanks for the support.
Phenomenal. I have already been very much confused with the connections of steel design. It would be great if you can provide a few work out examples for better understanding.
Great video Steel Structural Connection.
Hi Stafford, thanks for the support.
Great video legend
Great work sir. I can see you are an experienced professional with a lot of knowledge and background. I am a 3 years in to the field working after graduating and personally I am very interested in the philosophy you are using when doing your design and calculations. The thought process behind your craft. I would be very happy if you show us a design example worked out. We need to share our methods and assumptions, so we grow as a stronger and better community.
Hi Stefan thanks for the support. Hopefully you can pick it up from my future videos, design philosophy would be a good video.
Excellent content , keep it up.
Thanks for the continued support, Deepak.
Thank you so much 🙏
Thanks for the continued support Kimmy
love your videos, its interesting to see some of the slight differences in connections we use. For the beam or column splice we just do bolted on both members (no shop welding of plates). And bolted moment connections are extremely popular in our steel building design but as another commenter mentioned, as the buildings get larger, the connection design is done by a PE at the company of the steel fabricator and we as EOR just review their design and approve their design during the shop drawing phase. But I do miss designing the connections, it was fun!
Hi Peter, Designing and detailing the connection in steel is one of the most enjoyable things in steel design.
@@BrendanHasty It is, but placing columns and beams that work within an architectural layout is a puzzle and skill in and of itself, a lot of fun as well!
Very informative video.
I'm expecting more about rcc,steel and composite structures design philosophy and how you design.
Thanks.
Appreciate your efforts sir.
Hi Kuldeep, glad that you enjoyed. future videos are being planned. thanks for the suggestion.
Great channel! Where I work, steel connection design is almost always delegated to the steel fabricator and not done by the EOR
Hi Parrick, connections is where all the fun is in steel design. Have you had a chance to design them?
Great video
Thanks for the support
Thank you. I would like to know how a fixed connection can be achieved to when mullion is connected to concrete slab. Kindly request to make some video on the types of facade connections .
Thanks alot a lot you are great..
We need courses from you in concrete and steel please
Thanks for your support! I'm working on it.
Hi Brendan, with so many Structural Analysis software's to choose from. What particular one could you recommend as the best and why?
Also, great videos and thanks for the extra added info in your videos 💯
Hi Ali, I have done a video on this th-cam.com/video/c4wm96hLSBc/w-d-xo.html thanks for the support.
Great video! Do you have any best practice (or reference) for bolted connections in marine/subsea environments?
Hi Sigurd, this would really about protecting the steel work. Bolts may be stainless steel, it may also need a maintenance regime. Thanks for watching and the support.
Please do , capping beam , piles and the Shotcrete wall and how they work together structurally speaking and what will happen if piles are out of tolerance.
thanks for the support and suggestion this seem like a good topic. I will add it to the list
I'm a student in Bach Khoa Ho Chi Minh City, I've one course about it, and I fell, it so hard, as the result. When I see your explanation, it's easy than I learned V:
Hi Taun, Glad that I could help
Hello Brendan, I commend your effort and zeal in making these vidoes. It is obvious that you are proficient in your job, and you have the passion to pass it on to budding engineers.
Nevertheless, I'd suggest having an explanation of each concept (in this case connections) as voice-overs while giving more time to the structural drawings and details. In this case, more time should have been given to the connections than their explanation. This will aid young engineers who lack site experience to visualize the structure more.
Thanks for the suggestion for improvement.
More time will ruin the "momentum". Now I came why there is always a dead line and "pressure". Inner engineering.
Hello Brendan, amazing video as usual
I'd like to ask if there are some books about steel connections you'd recommend to learn more about the subject
Thanks in advance,
Tonio
Hi Tonio, I would recommend the steel designers hand book, there is lots of good guides on the Web. Hilti has a good guide on base plate design
@@BrendanHasty Thank you, I'll check the suggested material. Have a nice day
Hi Brendan, have you heard of Idea Statica for designing steel connections? What are your thoughts on that software?
Hi Fernando, I have but have not had the chance to design using it. It looks great for complex connection design.
Hey Brendan, I'm a third-year uni student majoring in structural engineering, do you have any tips that could help me in my further study/career?
Hi Yohannes, keep studying after graduation, after several years of design work do some site work. And enjoy the journey.
Do you have recommend books for foreman for additional ideas and information.
Sir, is there a provision that the location of welded splicing of steel column should not be located at column-girder connection? Thank you.
Do a video on opal tower. Didn't wsp do this project?
Hi Brendan, youtube recommended me your video and here i am watching all. I am a civil engineer and have worked in the construction of Hydroelectric projects in the Himalayan nation of Bhutan for about 7 years. I always had it at the back of my mind to learn and become a structural engineer some day but I could not when back home as it wasn’t a design company I was working with. Now that I am in Perth for the last year and a half for my spouse’s studies. M looking into getting a first hand experience working with design firms and learn the art of designing. How do you see the prospect for a person like me, is it a good go to transition at this juncture of my life. Any place I could get some reliable and adequate resources that are applicable for structural engineers in Australia. M hopeful to hear back from you. Thanks.
Hi Kiran, Engineers Australia has some additional assessments that would help, also getting your IstructE chartership would help. You just need to get your foot in the door; starting at a small firm may be easier.
Enjoy ur video
Glad that you enjoyed it Chee
Hi Brendan, what your thought on Revit making all the details for steel fabrication in 3D model?
Hi Lei, Revit is good to model in 3D, however, the model can get very heavy slowing down the computer. You just need to get carefully manage LOI shown.
@@BrendanHasty Thank you Brendan, keep up the great work!
What is the advantage then of having a welded connection?
Amazing content! Is this details dwg file available somewhere? Thanks!
Thanks for the support. I don't have them in a convenient place I will need to get something together
Hello Brendan, I'm a steel structure student beginner , i want u to help me to give some tips or links on youtube that could help me to understand more basics such as loading , designing of tension and compression members,etc
And also more links that would help me on the future when i become more capable of getting more info after I'm done with beginners stage ... I'm so excited for this really !!
Hi Bahaa, Look into books, if in austalia the Steel designer hand book it great, it should be linked in the discription. Any specific structures you are interested in or just steel design in general?
@@BrendanHasty just basics for now ... I'm from egypt idk what shall i do to learn basics in an easy way , I'm interested in youtube learning channels but i can not find any channel that helps me to learn basics till now
Can I ask, when you say the connections are considered pinned because they transfer no moment, isn't the moment reacted against by the bolts force couple and arrangement? Is this assumption just a simplification?
Is it possible to have zero weld steel structural connections? for example, for joining two UBs at right angles, could you bolt to both beams with a bracket in between? I remember reading about weldless cleat bolting systems somewhere. Is there also a way to splice beams together without having the weld on one side at the top and the other side at the bottom as your diagram has. I am amazing at how much welding is required even for small steel structures given the added cost and delays it may bring, whereas a structure primarily built with bolts would likely be easier to erect don't you think? anyway, interested to hear your thoughts if you have the time.
Hi Benjamin, you can make the connections without welding, however it doesn't save any time. As the welding will occur in the factory prior to coming to site. They would also be some secondary actions to be careful of with a connection that I'd fully bolted.
Hey brendan
Can you suggest me any topic for thesis work
( Structural engineering)
Hi Atul, Look into structural dynamics, I find it very interesting.
🙌🏿
Thanks for the support Robert.
Hey Brendan can you suggest me any topic for the thesis (structure engineering ) thanks
Hi Kimmy I always found structural dynamics interesting, either for slabs or building behaviour(lateral). Shaping building to reduce wind load would also be interesting. But my best recommendation is pick something you find interesting and a lecture you work well with.
@@BrendanHasty thank you
You Are Boss I Think so
thanks Noman.
@@BrendanHasty kd engineering official bd .this is my channel.i will provide lecture about structural design
right now i am in my senior year of the bachelor degree in turkey. i would like to consantrate on structural engineering, especially steel structures. Do you advise me to take my MS degree on structural engineering first and then get into my career? is it important and necessary? or should i just get into work and have experience after bachelor degree?
Thank you for sharing this type of informative videos 🙏
Hi Kaan, Start working you will learn alot, you can take MS after a couple of years if you want to extend your knowledge.
Hi Brandon,
What is the tolerance within the steel erection
2-3 on a connection between columns that gived you around 6mm.
Thanks Brandon,
I also wanted to ask, is there any rules for the installation of bolts, example for the columns that have end plate splice should the bolts be on top and the nut at the bottom?
what does the word "moment" mean in this video??
Hi alex Moment is flexture.
How can architects become structural engineers? Do they have to start from scratch in university?
Hello can you gîve me some software to design connection thank you
Can you actually get Metric structural bolts in Australia?
we use Metric bolts in constructure M10 ,12 16 20 24 28 32
@@BrendanHasty interesting.
Thanks for video. I request you to speak more slowly and use more pics. I started my new career as detailer.
Hi Jerry, thanks for the support and comments to help me improve
Great info on connections.Please, slow down a little 😅, It's the accent which is just hard to get what you are saying and visualising at that speed.... Otherwise you are perfect.... Cheers Mate 🥂....
Thanks for your feedback, mate!
Can a mechanical engineer work as a structural engineer?
They have different skill sets but there are some crossovers
Seismic engineering design for steel structure means much more complex connections for elements, however, the detailer must be trained with sufficient seismic engineering knowledge and skills.
Hi Scott agree on that. Fuses, dampener and much more.
Nice work, been watching a few of your videos now. Go have a coffee on me! :)
Hi Clark, thanks for the support greatly appreciated. I will enjoy the Coffee
Unfortunately, your opinion is biased towards the gas car because of the broker kick back incentive.
??? I don't understand this comment
Sorry it was for the previous video that I watched. I’m too slow -,-
Big fan of your work/videos :)
The comment help the video, anyway. Anything for watching