My sister has a 2011 Enclave, her oil change place said the DRL bulb change would involve removing the whole front bumper fascia and needed to be done by a Buick dealer. I saw your video and had it done myself in 10 minutes. The only difference was her 2011 uses torx screws instead of Phillips. Thanks for the free advice.
I just wanted to thank you so much, you saved me $97.00 from Buick Of Orange Park.Fl . They still cheated me on buying the Bulb $11.00 a piece from them since I don't know parts number. Your Video just did the job itself. Thank God for you.
Thank you! The bulb cost me $100, other than that about twenty minutes. Would have been at least twice that plus a day without the car. Excellent use of the internet.
+Daniel A. Henriques Thank you for checking us out, as well as the advice. This will certainly assist other viewers performing the replacement. 1aauto.com
Are the daytime running lamps the assembly built into the fog lights??? Both of mine are not working... But I'm unsure of the proper bulb that is supposed to be installed because I didn't know what to call them when I was at the parts store. 2011 Enclave Thanks!
Great video. After almost an hour of removing stuff from under the hood I decided to watch your video. How stupid can I be? It was a simple job after watching you.
I wish my 2013 Enclave just used a Phillips. My screws are star shaped and the headlight bulb my vehicle uses can't be touched with bare hands or dirty gloves.
+frepar This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c
You need to remove the wheel well cover if it is not warm, otherwise it will crack. To remove the well remove the tire and all of the screws and clips. I tried this method in my garage at about 55 degrees and the wheel well cover cracked quite easily.
Hi George, We currently do not have any auto repair videos on this particular year, make and model vehicle. Thanks for asking. We'll keep this request in mind in the event that we need to make this repair in the future. Have a great holiday season. 1aauto.com 866-403-3393
I used a 1" wide scraper between the tabs (watch the wires) to twist out socket. 2728 or 2827 amber bulb. Pick up the bulb first. Would be nice if this video gave bulb part numbers.
How about trouble shooting first, I know you are doing all this to sell us stuff but it would be nice to show us how you determined that the bulbs need changing in the first place!!!
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
My sister has a 2011 Enclave, her oil change place said the DRL bulb change would involve removing the whole front bumper fascia and needed to be done by a Buick dealer. I saw your video and had it done myself in 10 minutes. The only difference was her 2011 uses torx screws instead of Phillips. Thanks for the free advice.
You just saved me $79.00 Took me 10 minutes, thank you for posting this.
+TGF Apex Nice work. We're glad the video helped you out. 1aauto.com 866-403-3393
I just wanted to thank you so much, you saved me $97.00 from Buick Of Orange Park.Fl .
They still cheated me on buying the Bulb $11.00 a piece from them since I don't know parts number.
Your Video just did the job itself. Thank God for you.
Franklin Ibeakanma Glad we could help 1aauto.com 866-403-3393
Great video, helped out me with my enclave and my mother with her regal. Thumbs up
+schwarzschild radius Thanks for watching. 1aauto.com
Thank you! The bulb cost me $100, other than that about twenty minutes. Would have been at least twice that plus a day without the car. Excellent use of the internet.
Very helpful. Thanks.
Do you know if the process is the same for HIDS (High Def bulbs)? I have a CXL that comes with $100 HIDS.
We currently do not have an auto repair video on this particular repair. It may be a similar process. 1aauto.com 866-403-3393
Thank you saved me 180 just to get it put in!!!
What are the different size bulbs? Then I could get them ahead of time to change them out. Thanks.
That's great but what about the HID bulbs??
thanks for posting it!!! great helpness
Sometimes the Daytime Running Lamp (Socket) burns out also. Be advised of this also.
+Daniel A. Henriques Thank you for checking us out, as well as the advice. This will certainly assist other viewers performing the replacement. 1aauto.com
Are the daytime running lamps the assembly built into the fog lights??? Both of mine are not working... But I'm unsure of the proper bulb that is supposed to be installed because I didn't know what to call them when I was at the parts store. 2011 Enclave Thanks!
Thanks for the info
i guess ill figure this out and post the video for the Regal myself.thanks
Doran Yahanan please do for the fog lights.
habe you done that vid yet?
Great video. After almost an hour of removing stuff from under the hood I decided to watch your video. How stupid can I be? It was a simple job after watching you.
+Mercedes Obd1 Diagnostic Code Reader. Thanks for watching. Keep us in mind in the future if you need more parts for your vehicle. 1aauto.com
Thanks for the video. It is a tight fit but I got it.
thanks so much!!!!
I wish my 2013 Enclave just used a Phillips. My screws are star shaped and the headlight bulb my vehicle uses can't be touched with bare hands or dirty gloves.
Anyway to do this without going thru the tire?
Without removing the tire and covering fander it is very difficult to unlatch the clamp holding the main headlight bulb. Any suggestion?
Thank you
Is this same process for a Rendezvous?
+frepar This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c
You need to remove the wheel well cover if it is not warm, otherwise it will crack. To remove the well remove the tire and all of the screws and clips. I tried this method in my garage at about 55 degrees and the wheel well cover cracked quite easily.
+James Stump Thanks for checking us out. 1AAuto.com
I got two screws that are stripped will not come out any idea on how get them out.
Very helpful, THANKS . CHUCK
You show every bulb but for got to so the hid bulb.
is this same for 2017 buick verano?
+2fast4u We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task.
Like others have said, You don't show the headlight replacement. Its not even mentioned on how to access it.
What bulb numbers? Driving Light? Side marker light?
Are there any videos on a 2013 Chevy Sonic TL?
Hi George, We currently do not have any auto repair videos on this particular year, make and model vehicle. Thanks for asking. We'll keep this request in mind in the event that we need to make this repair in the future. Have a great holiday season. 1aauto.com 866-403-3393
I used a 1" wide scraper between the tabs (watch the wires) to twist out socket. 2728 or 2827 amber bulb. Pick up the bulb first. Would be nice if this video gave bulb part numbers.
+Harry & Linda Nicholson Thanks for the tips. We'll send that forward about the bulb part numbers. We try to cover those in newer videos.
Did not see how to change the front turn signal
unfortunately I couldn’t see the actual bulbs to be sure I am changing the right lights.
Why didnt you show the bulbs?
How about trouble shooting first, I know you are doing all this to sell us stuff but it would be nice to show us how you determined that the bulbs need changing in the first place!!!
If they don't work...they need to be replaced.
So, you don’t use gloves 🧤
Hold up there bud there's six screws and btw they are not Philips 😂
That's my car
That is 100% not how you change the headlight on my 09...
you didn't even change the headlight like it said in your video
+Jeanne Hoemberg This video was just to show how to access and change the bulbs. Hope this helps you out. 1aauto.com