BE ADVISED!!!! This is the best video on the internet for Enclave headlight replacement! The key piece of info is regarding the black tab to release the bulb, as well as this is one of the only videos that actually shows what you're dealing with. EXCELLENT help!
I think a better way to describe the tab instead of twisting it which confused me but is technically right you are twisting tab assy . I think it would be clearer for folks if you described the tab being push up or down. IMHO
Just completed changing my driver's side headlight... Thanks to Seth for making the video... got some comments... First, make sure you've got the right tools! A screwdriver with a star bit, and a plastic rivet pry tool is invaluable. I got one for $3 on Amazon. Also recommend nitrile gloves or similar. I first tried to do it without taking the wheel off, managed to get through the splash guard, and into the headlight cavity... got the bad light bulb out, but had an issue getting the new one in. Visibility was an issue, but I just couldn't get the new bulb into the socket far enough to turn the plastic lock tab. Reluctantly, I realized I'd have to take the wheel off. Again, HAVE THE RIGHT TOOLS. The bloody hardest thing to do to this point was getting the effin' jack out of the back, and then, the jack bar out of the canvas bag... it was so tight in there, I just cut the bitch off. I heartily recommend using a better jack, and definitely a better bar, use a ratchet and socket if you can. Jacked the car up, got the wheel off, popped about 4 rivets out and was able to get the new bulb in. MAKE SURE YOU PUT THE COVER BACK to the socket, I had to take 3 or 4 screws back out to get it done. Seems to have worked. I used Osram 66340HBI Xenarc 35W D3S PK32D-5 4600K HID Xenon Light Bulbs via Amazon. I wanted to use the Laser upgraded ones, but couldn't justify it on an 11 yr old car with 200k miles on it. Looking at the beams on the closed garage door, it actually looked like the remaining stock bulb was a little brighter, but I understand there's a burn-in period. I was gonna replace the other bulb, but as they look pretty much the same, I'll hold off and keep the other new bulb as a spare. Gotta admit, I fumbled the bulb getting it into the socket, so glad I was wearing the gloves. Also, after you've attached the wire to the bulb, don't drop it under the socket... I had a helluva time getting it back out. Ah well, it's all experience, right? Oh, and those 4 plastic rivets I pulled out weren't about to go back in, so I just left them out. The remaining ones and the screws seem to be doing a well enough job. Good luck!
Thank you for this incredible video -it saved me $350.00 that a major dealer was going to charge me for labor only - not including the $150.00 for the D3S bulb. Your steps are the best walkthrough to do this repair . Great instruction!!!!!!
OUTSTANDING VIDEO! Took a miserable job and turned it into a 20 minute gig, start to finish. Thank you sir, you should do more videos like this... You've got a knack for effectively demonstrating, which so many others can't seem to do.
Thank you for all the details. This is how video instructions with clear commentary should be. I have seen many rather hundreds of videos but yours is the best. All the instructions, for jack, compartment, tools, and clear demonstration with good tips. I liked your channel. Thank you very much for sharing this with youtubers. Great instructional yet practical video.
We owe a lot to this young man and the video he created - two of biggest points are the hold down latch (down to unlock and upward to lock) and the direction the power plug faces (downward) - if you didn't know that, you would probably never complete the replacement process successfully. This video replaces the passenger's side bulb, I replaced the drivers side. The only difference is the hold down latch is on left side of the lamp holder. I did the replacement by rotating the tire inward as far as it would turn and then took out the sever T20 screws holding the rubber wheel well cover - it was difficult at best, if you have the time, do exactly what this video suggests - remove the tire. Thanks again, you really helped me.
THANK YOU VERY MUCH, I saved $ 725 compare to the dealership quote while having fun changing the light bulb :) I suggest putting more support under the car for your safety as it is a very heavy car.
More support is encouraged, I did not mention to put a wedge on the back wheels to prevent it from rolling back. However my buick is awd, but everytime you jack your car up, you should jack stands. But I did not get fully underneath my car. Still good point!
More support is encouraged, I did not mention to put a wedge on the back wheels to prevent it from rolling back. However my buick is awd, but everytime you jack your car up, you should jack stands. But I did not get fully underneath my car. Still good point!
Your level of detail was phenomenal. You counted the star screws and the plastic rivets. The key is the black tab on the bulb holder and where to push the tab to release the bulb from the harness. I could have easily gotten that far on my own but would probably have broken everything without those last details. Thanks.
Thank you very much, Seth! I just replaced the passenger side bulb on my wife’s 2013 Enclave this morning. This video is outstanding. Saved myself a ton of money doing it myself.
This saved me SO MUCH TIME!!! Only thing to add is how to get the darn jack out of the storage slot who's opening isn`t large enough. Thanks for detailed video. I appreciated how many plastic clips and screws to remove and the decription of the lamp latch and fingers. Amazon sells replacement clips.
This video saved me a couple hundred dollars. I didn't remove the wheel, so I had much less space and lots of pinch points on my hands. lol Anyone who does it like I did, wear rubber gloves. Also, it's a pain to keep from breaking the ceramic(?) mechanism on the new bulb while installing it, and remembering which way to attach the wiring harness to the bulb because there is one single prong and a double prong. It only goes on the bulb ONE way. Furthermore, you are the only video that mentions the black plastic tab. Thanks!!!!
Great video. Step by step replacement of the light bulb plus the ending showing how the aftermarket blue light bulb shines out. A complete instructional video. Thank you.
just received a quote for $319.00 per bulb from my dealer--thank you for posting..ordered the bulbs myself for a fraction of the cost...this video was awesome!! ty!!
Thanks! EDIT: My initial comment was "Thanks!" but dude, that was just not enough. This is one of the five ALL TIME BEST DIY that I have come across here on TH-cam. I can't even imagine how much time you saved me this afternoon when I finally got the chance to work on this thing. Saying "Thanks!" just just seem to be enough, but it's the best that I've got, so I wanted to say it again. THANKS!!!
This was very helpful. Tried to do it the other way with zero success. So I bit the bullet so to speak and removed the tire along with the cover inside and presto I was finished. Thx again! Awesome video!
THANK YOU FOR THIS! I was getting quoted 200-300 to replace a bulb saying had to take off bumper which is false! I have 2011 Enclave and they only difficult part was reinserting plastic tabs since they can break or bend after removing. Great video Seth!
Almost exactly what I needed. I was doing the drivers side, and there is a soft flexible hose fixed to the wall that I could not get out, and after a while of trying to figure that out, just left the back half of the guard on and only took off the front half. Worked like a charm after that. Thanks so much! I had to change the buld abd the ballast, and got two bulbs and a ballast online for $100, so saved $700 as the dealership wanted $800 to change the bulb and the ballast!!!!
Great video. I highly recommend taking off the wheel. I didn't remove the wheel and I had a hard time to put the headlight back on. Then I had to remove the wheel, which made it much easier. Thanks again for the help video.
Thanks, Seth! Shocking. My dealer just quoted me $290/bulb and another $120 labor! $800 for two headlamps???? No way. Even my Volvo S80 took $20 bulbs that you could hand replace in 5 minutes. Bought the two Phillips bulbs on Amazon for $75/ea - my total savings? $650! Wow. I'll be putting your video to good work soon. Thank you for doing this!
Done - 45 min. I was able to do it without taking off the tire, but had to dislocated my wrist to get the bulb out! ;) Seriously - next one I do, the wheel comes off as Seth's video shows - truly the smart thing to do. Would also have been easier to see the clamp you have to rotate to get the bulb out. $75 and 45 mins is much better than $400. Watch out for bulbs that only have a low beam - that's why some are less expensive.
Thank you, I am glad that I am saving people plenty of money! That's why I wanted to do this in the first place. I am not paying $300+ to change a headlight bulb
Definitely agree with folks that this video and the comments below are great. I didn't take the wheel off, instead turned the wheel and just peeled back part of the wheel well cover. While I didn't have as easy of access as they did in this video it did get the job done. I ordered the HID lights online and it took about 40 minutes to do both sides. One place quoted me 320 per bulb (not a typo) and 140 an hour for labor and would take 1.5 hours to do. I recommend wearing the gloves the same as he did in the video.
Thanks--Great Video. I was trying to get the bulb out by turning it counterclockwise but your video enlightened me and prevented me from doing damage to the mounting socket. Great Job.
Your video is still helpful! I was quoted $900 at dealership to replace both bulbs! Not sure if I can do it but I can buy the bulbs and hopefully find someone cheaper than the dealer!
Great instructional video! However, I was able to change the bulb in about 30 mins WITHOUT taking off the wheel. I have average size hands too (LG gloves size). Thanks again.
Was unsure about attacking it this way, but GREAT job Seth! Thanks for posting. Although it's been posted a while It'll be a go to video for years to come.
Excellent video , my headlight when car just starts comes on min or so then off then back on then off completely, I went in to see if I had a short , everything seemed snug and intact and clean , so put back together till I can get a new HID bulb , your video was extremely helpful cause it's dark and tight on there help knowing what to do !!
Hey, Thanks, this saved me a shop expense. Info. the little black tap that holds the bulb in place. On my 2014 it rotates upward to release and back down to secure it back in place. Thanks for your video it helped a lot.
Factory spec in the manual is 140 ft/lbs of torque on the lug nuts. I recently had my wheels rotated and they were torqued to 120-125 so that is what I ran mine too. Will check them after 500 miles and re-torque as needed.
Removing wheel definitely helps, the inner fender well comes off too. My problem came inserting the light, broke 2 and at $80 a pop on Amazon, that hurt. Be careful installing lights people, no fun
You can do this without pulling off the entire splashguard, and you do not need to take off the wheel. You can take off those 7 star bolts and pull the splash guard open enough to reach in. Turn the wheel in a direction that allows you to get the splash guard open and reach in.
Nice job! Just bought a premium '13 Enclave for my wife and i noticed a headlight out while test drving...glad for that since it seems expensive...Buick dealer replaced it...they said it would take about hr.& half..how long did it actually take you? If you do alot of your own mechanics on your Enclave please post them for future🔧. Thanks again. 💎 Nice Car 💎!
i saw another video for an Acadia saying to unplug the battery. since Enclave and Acadia are made almost the same, do you recommend unplugging the battery?
Exactly what I need. Got a question. Do you know how to check for a leaking AC system in the 2013 enclave? AC went out a year ago, it had a leak, they plugged it and refilled the freon and it just happened again. Any ideas?
this appears to be a problem with the Buick enclave because this also happened to me...only they couldn't find the leak and filled my system with a dye to find it when it happens again.. grrr.
@@jessicawalker983 we had that happen with ours. More than likely it's the rear condenser. You have to remove the right rear Plastic trim from the back of inside of your vehicle to access it
Wish I saw this before I got shafted at the dealership $400 for one bulb between parts and labor. One question... is the process still the same for the articulating headlights in the Enclave? I didn’t see any mention of that.
Great video but wouldn’t it save time to go from the top and just removing the plastic retaining clips and lifting the panel up? I saved probably 20-30mins of time just doing that.
thanks for video man. I'm looking to order replacement bulbs from Amazon but I'm curious are the cheaper ones on Amazon only low beams? do u still have high beams? if so could u tell me the light you ordered.
Cody Joines the bulb is for both high and low beams. The ones I bought off amazon were 6k D3S bulbs for about $45 dollars I think. But try and buy good quality name brand bulbs, they will last longer. Thanks for watching!
Seth Souza I ended up getting the Phillips one off Amazon. was a little more but worked great. color is a little off from the factory bulb on other side but it's fine. not gonna replace a working bulb.
great video, thanks but this task to change a bulb is a pain. can't believe a manufacture would design it this way, yes to keep owners from working on own vehicles, however it is still time consuming. This is so dealers can charge more labor hours.
Great video! was wondering my daytime light on passenger side are out. They say I have to replace the whole thing which is 1400. Do you know any other way to replace those?
My first bulb went out around 40-50K I think. But, it went out when I published this video and my car is a 2013, so three years. I think where you live can play a part too.
Sorry this video is not about the parking light bulb because it differs from the headlight bulb. But your local auto part store should tell you the part number
Great video,Good job,but I have to say- Buick is JUNK…Junk and more JUNK. I myself will never buy the trash. However my sister needs her junk fixed AGAIN,so thanks for the video…
you dont have to remove the tire. there are videos out there showing you that all you need to do is turn the wheel but you wont have as much space to work with. and you can take the transmission apart if you want to. that will probably make your lights shine brighter.
@@sethsouza8987 Thank you. After doing quite a bit of searching, it turns out this video is actually one of the simplest ones. For this reason alone, I regret buying a Buick.
I really liked this car until the headlights went out, I hope the rest of the usually easy repairs aren’t as big of a pain in the ass , I thought the first video I watched was a joke but no... it’s going to take me an hour to change a damn headlight bulb
I didnt touch the glass at all it was hanging just like yours then I went to remove it . It wouldn't budge. I tried moving it side to side back and forward nothing.
nmoore1978 because it’s a very tight spot from the top and you cannot see what you are doing. It would all be done by feel and it’s a very delicate bulb. I tried that method and switched to tire method. You have way more room to work and have the benefit of seeing what you’re doing.
BE ADVISED!!!! This is the best video on the internet for Enclave headlight replacement! The key piece of info is regarding the black tab to release the bulb, as well as this is one of the only videos that actually shows what you're dealing with. EXCELLENT help!
Thank you for the comment!
I think a better way to describe the tab instead of twisting it which confused me but is technically right you are twisting tab assy . I think it would be clearer for folks if you described the tab being push up or down. IMHO
Just completed changing my driver's side headlight... Thanks to Seth for making the video... got some comments... First, make sure you've got the right tools! A screwdriver with a star bit, and a plastic rivet pry tool is invaluable. I got one for $3 on Amazon. Also recommend nitrile gloves or similar. I first tried to do it without taking the wheel off, managed to get through the splash guard, and into the headlight cavity... got the bad light bulb out, but had an issue getting the new one in. Visibility was an issue, but I just couldn't get the new bulb into the socket far enough to turn the plastic lock tab. Reluctantly, I realized I'd have to take the wheel off. Again, HAVE THE RIGHT TOOLS. The bloody hardest thing to do to this point was getting the effin' jack out of the back, and then, the jack bar out of the canvas bag... it was so tight in there, I just cut the bitch off. I heartily recommend using a better jack, and definitely a better bar, use a ratchet and socket if you can. Jacked the car up, got the wheel off, popped about 4 rivets out and was able to get the new bulb in. MAKE SURE YOU PUT THE COVER BACK to the socket, I had to take 3 or 4 screws back out to get it done. Seems to have worked. I used Osram 66340HBI Xenarc 35W D3S PK32D-5 4600K HID Xenon Light Bulbs via Amazon. I wanted to use the Laser upgraded ones, but couldn't justify it on an 11 yr old car with 200k miles on it. Looking at the beams on the closed garage door, it actually looked like the remaining stock bulb was a little brighter, but I understand there's a burn-in period. I was gonna replace the other bulb, but as they look pretty much the same, I'll hold off and keep the other new bulb as a spare. Gotta admit, I fumbled the bulb getting it into the socket, so glad I was wearing the gloves. Also, after you've attached the wire to the bulb, don't drop it under the socket... I had a helluva time getting it back out. Ah well, it's all experience, right? Oh, and those 4 plastic rivets I pulled out weren't about to go back in, so I just left them out. The remaining ones and the screws seem to be doing a well enough job. Good luck!
Thank you for this incredible video -it saved me $350.00 that a major dealer was going to charge me for labor only - not including the $150.00 for the D3S bulb. Your steps are the best walkthrough to do this repair . Great instruction!!!!!!
Great Job! Who would have thought you would have to remove the wheel and the splash shield, just to access the headlight! Nice design BUICK!
Followed the steps in your video and changed the left headlight in my Enclave without any trouble and I’m 70 years old! Thanks.
OUTSTANDING VIDEO! Took a miserable job and turned it into a 20 minute gig, start to finish. Thank you sir, you should do more videos like this... You've got a knack for effectively demonstrating, which so many others can't seem to do.
This is a very good video. It's easier enough for my 19 year old daughter to do. She loves working on cars. Very good video. Thank you.
Thank you for all the details. This is how video instructions with clear commentary should be. I have seen many rather hundreds of videos but yours is the best. All the instructions, for jack, compartment, tools, and clear demonstration with good tips. I liked your channel. Thank you very much for sharing this with youtubers. Great instructional yet practical video.
We owe a lot to this young man and the video he created - two of biggest points are the hold down latch (down to unlock and upward to lock) and the direction the power plug faces (downward) - if you didn't know that, you would probably never complete the replacement process successfully. This video replaces the passenger's side bulb, I replaced the drivers side. The only difference is the hold down latch is on left side of the lamp holder. I did the replacement by rotating the tire inward as far as it would turn and then took out the sever T20 screws holding the rubber wheel well cover - it was difficult at best, if you have the time, do exactly what this video suggests - remove the tire. Thanks again, you really helped me.
El mejor video que e visto de reemplazar luces.
THANK YOU VERY MUCH, I saved $ 725 compare to the dealership quote while having fun changing the light bulb :)
I suggest putting more support under the car for your safety as it is a very heavy car.
More support is encouraged, I did not mention to put a wedge on the back wheels to prevent it from rolling back. However my buick is awd, but everytime you jack your car up, you should jack stands. But I did not get fully underneath my car. Still good point!
More support is encouraged, I did not mention to put a wedge on the back wheels to prevent it from rolling back. However my buick is awd, but everytime you jack your car up, you should jack stands. But I did not get fully underneath my car. Still good point!
Your level of detail was phenomenal. You counted the star screws and the plastic rivets. The key is the black tab on the bulb holder and where to push the tab to release the bulb from the harness. I could have easily gotten that far on my own but would probably have broken everything without those last details. Thanks.
Thank you very much, Seth! I just replaced the passenger side bulb on my wife’s 2013 Enclave this morning. This video is outstanding. Saved myself a ton of money doing it myself.
This saved me SO MUCH TIME!!! Only thing to add is how to get the darn jack out of the storage slot who's opening isn`t large enough. Thanks for detailed video. I appreciated how many plastic clips and screws to remove and the decription of the lamp latch and fingers. Amazon sells replacement clips.
This video saved me a couple hundred dollars. I didn't remove the wheel, so I had much less space and lots of pinch points on my hands. lol Anyone who does it like I did, wear rubber gloves. Also, it's a pain to keep from breaking the ceramic(?) mechanism on the new bulb while installing it, and remembering which way to attach the wiring harness to the bulb because there is one single prong and a double prong. It only goes on the bulb ONE way. Furthermore, you are the only video that mentions the black plastic tab. Thanks!!!!
Thanks, used your instructions to change this morning, great job!!
Great video. Step by step replacement of the light bulb plus the ending showing how the aftermarket blue light bulb shines out. A complete instructional video. Thank you.
thank you
just received a quote for $319.00 per bulb from my dealer--thank you for posting..ordered the bulbs myself for a fraction of the cost...this video was awesome!! ty!!
Glad I could help! The dealership is called the stealership and that's why I try to do things myself.
Thanks!
EDIT: My initial comment was "Thanks!" but dude, that was just not enough. This is one of the five ALL TIME BEST DIY that I have come across here on TH-cam. I can't even imagine how much time you saved me this afternoon when I finally got the chance to work on this thing. Saying "Thanks!" just just seem to be enough, but it's the best that I've got, so I wanted to say it again.
THANKS!!!
no problem, im glad this help you
Best video for this specific replacement I was able to find online!
This was very helpful. Tried to do it the other way with zero success. So I bit the bullet so to speak and removed the tire along with the cover inside and presto I was finished. Thx again! Awesome video!
Mike Ray glad this helped, I tried the other way too, no success either.
THANK YOU FOR THIS! I was getting quoted 200-300 to replace a bulb saying had to take off bumper which is false! I have 2011 Enclave and they only difficult part was reinserting plastic tabs since they can break or bend after removing. Great video Seth!
Daniel Martin thank you so much. Glad this helped
Almost exactly what I needed. I was doing the drivers side, and there is a soft flexible hose fixed to the wall that I could not get out, and after a while of trying to figure that out, just left the back half of the guard on and only took off the front half. Worked like a charm after that. Thanks so much! I had to change the buld abd the ballast, and got two bulbs and a ballast online for $100, so saved $700 as the dealership wanted $800 to change the bulb and the ballast!!!!
Great video. I highly recommend taking off the wheel. I didn't remove the wheel and I had a hard time to put the headlight back on. Then I had to remove the wheel, which made it much easier. Thanks again for the help video.
Thank you! Just saved me $300! Dealer wanted $382 to fix headlight!
Thanks, Seth! Shocking. My dealer just quoted me $290/bulb and another $120 labor! $800 for two headlamps???? No way. Even my Volvo S80 took $20 bulbs that you could hand replace in 5 minutes. Bought the two Phillips bulbs on Amazon for $75/ea - my total savings? $650! Wow. I'll be putting your video to good work soon. Thank you for doing this!
no problem. glad i can help!!
Done - 45 min. I was able to do it without taking off the tire, but had to dislocated my wrist to get the bulb out! ;) Seriously - next one I do, the wheel comes off as Seth's video shows - truly the smart thing to do. Would also have been easier to see the clamp you have to rotate to get the bulb out. $75 and 45 mins is much better than $400. Watch out for bulbs that only have a low beam - that's why some are less expensive.
Ryan LaPlante thank you soo much. sorry about the wrist, hope its not sore... right about taking the tire off. take the time and not injure yourself
thanks a lot. I followed your procedure and it was easy, otherwise I wouldn't even know how to start and you saved me some money.
Excellent video. Without this help some dealer would have charged me $300
Removing the tire was pure genius
Thank you, I am glad that I am saving people plenty of money! That's why I wanted to do this in the first place. I am not paying $300+ to change a headlight bulb
Thanks for the video bro, I was trying to remove the whole headlight and I quit trying 😂😂😂
Definitely agree with folks that this video and the comments below are great. I didn't take the wheel off, instead turned the wheel and just peeled back part of the wheel well cover. While I didn't have as easy of access as they did in this video it did get the job done. I ordered the HID lights online and it took about 40 minutes to do both sides. One place quoted me 320 per bulb (not a typo) and 140 an hour for labor and would take 1.5 hours to do. I recommend wearing the gloves the same as he did in the video.
Jarred Marcus thank you for the comment. Glad this helped and you saved a lot of money
Thanks--Great Video. I was trying to get the bulb out by turning it counterclockwise but your video enlightened me and prevented me from doing damage to the mounting socket. Great Job.
Thank you, glad I could help!
Very clear, to the point with no other bullshit. Thank you very much.
thanks for the help. I would recommend jack stands and rubber gloves when handling the bulb
Good video, would be nice if he explained how to release the wire from the bulb.
your video just saved me $225 in labor costs. thanks!
W0rldB0ss hey no problem, DIY FTW!
Your video is still helpful! I was quoted $900 at dealership to replace both bulbs! Not sure if I can do it but I can buy the bulbs and hopefully find someone cheaper than the dealer!
thank you Souza
Seth,
Your video was fantastic! One of the best self-help how-to videos I have ever seen. You should do this professionally. Thanks.
thank you. I am glad you found this helpful. Hopefully one day I can do more of them and do it professionally.
Great instructional video! However, I was able to change the bulb in about 30 mins WITHOUT taking off the wheel. I have average size hands too (LG gloves size). Thanks again.
I bet you I would have use a second secured jack stand under that frame sliding in and out from under that heavy buick nice videos
Thank you! Extremely helpful instruction video.
Was unsure about attacking it this way, but GREAT job Seth! Thanks for posting. Although it's been posted a while It'll be a go to video for years to come.
Excellent video , my headlight when car just starts comes on min or so then off then back on then off completely, I went in to see if I had a short , everything seemed snug and intact and clean , so put back together till I can get a new HID bulb , your video was extremely helpful cause it's dark and tight on there help knowing what to do !!
Nice job! Keep posting 👍
Very useful and exactly what I was looking for!
Thanks Seth.
This is my first time working on a Buick. I guess you can teach an old dog a new trick! lol
Take care.
Thanks for the video. Good job!
Seth, you're doing such a great job verbal and video, can you show us how to adjust headlights on the same Buick Enclave please?
Thank you for this video!!! All the details were a great help.
your grate ------------- well done
Hey, Thanks, this saved me a shop expense. Info. the little black tap that holds the bulb in place. On my 2014 it rotates upward to release and back down to secure it back in place. Thanks for your video it helped a lot.
Darryl Walker right, it should be lefty lousy, righty tighty, either side, the motion should be the same. Hoped this helped!
Thanks for your clear and valued info.
Thanks for the video great job! Will be replacing mine as soon as they come. Too expensive to buy at the auto parts store
My local advanced auto and O'Reilly's will price match with online competitor. I got 30-40 dollars knocked off. All I did was ask.
Great video. Thanks man we need more like this.
Awesome video.. saved me a lot of money..
Thanks a lot dude!! This is exactly what I was looking for. Helped me save a bunch of money!!
Best instruction on youtube!!!
great video, thanks, i had a hell ov a time getting the tab to release but i didn't remove the tire so not as much room to work ....
awesome video thank you! Blessings!
You are welcome! Thank you for watching.
Factory spec in the manual is 140 ft/lbs of torque on the lug nuts. I recently had my wheels rotated and they were torqued to 120-125 so that is what I ran mine too. Will check them after 500 miles and re-torque as needed.
thank you
You’re welcome
Removing wheel definitely helps, the inner fender well comes off too. My problem came inserting the light, broke 2 and at $80 a pop on Amazon, that hurt. Be careful installing lights people, no fun
Just a thought. Why not use a cordless drill with the right kind of socket for the lugnuts or the carjack?
You can do this without pulling off the entire splashguard, and you do not need to take off the wheel. You can take off those 7 star bolts and pull the splash guard open enough to reach in. Turn the wheel in a direction that allows you to get the splash guard open and reach in.
yes you can
Really good
Those tabs suck ,i think i broke mine. good job GM
Nice job! Just bought a premium '13 Enclave for my wife and i noticed a headlight out while test drving...glad for that since it seems expensive...Buick dealer replaced it...they said it would take about hr.& half..how long did it actually take you? If you do alot of your own mechanics on your Enclave please post them for future🔧. Thanks again. 💎 Nice Car 💎!
i saw another video for an Acadia saying to unplug the battery. since Enclave and Acadia are made almost the same, do you recommend unplugging the battery?
I would say yeah cause sometimes it’ll want to electrocute you if you’re not careful (wait that comment was from 3 years ago oops)
Very well done
Excellente!
Exactly what I need. Got a question. Do you know how to check for a leaking AC system in the 2013 enclave? AC went out a year ago, it had a leak, they plugged it and refilled the freon and it just happened again. Any ideas?
I would try and get an AC leak detector. If you do not know to use it then I would suggest taking it to a shop and have them do it.
this appears to be a problem with the Buick enclave because this also happened to me...only they couldn't find the leak and filled my system with a dye to find it when it happens again.. grrr.
@@jessicawalker983 we had that happen with ours. More than likely it's the rear condenser. You have to remove the right rear Plastic trim from the back of inside of your vehicle to access it
Turn the light switch on manually and they work during the daytime!!
Thanks!
Wish I saw this before I got shafted at the dealership $400 for one bulb between parts and labor. One question... is the process still the same for the articulating headlights in the Enclave? I didn’t see any mention of that.
Does this also apply for buick encore i need to change my headlight
Great video but wouldn’t it save time to go from the top and just removing the plastic retaining clips and lifting the panel up? I saved probably 20-30mins of time just doing that.
You push the bulb release lever down you do not twist it.
thanks for video man. I'm looking to order replacement bulbs from Amazon but I'm curious are the cheaper ones on Amazon only low beams? do u still have high beams? if so could u tell me the light you ordered.
Cody Joines the bulb is for both high and low beams. The ones I bought off amazon were 6k D3S bulbs for about $45 dollars I think. But try and buy good quality name brand bulbs, they will last longer. Thanks for watching!
Seth Souza I ended up getting the Phillips one off Amazon. was a little more but worked great. color is a little off from the factory bulb on other side but it's fine. not gonna replace a working bulb.
Me neither, as long as the color isn't too off, I would like to keep a spare.
great video, thanks but this task to change a bulb is a pain. can't believe a manufacture would design it this way, yes to keep owners from working on own vehicles, however it is still time consuming. This is so dealers can charge more labor hours.
From people that have commented, they have said it was hundreds of dollars!! CRAZY!!!
Great video! was wondering my daytime light on passenger side are out. They say I have to replace the whole thing which is 1400. Do you know any other way to replace those?
I have this same issue and was wondering if there is a way to fix it without replacing the whole thing
It is best to wear gloves when handling the light so you don't touch the bulb by accident.
How many miles on your 2013 Enclave asking because bulb want out.
My first bulb went out around 40-50K I think. But, it went out when I published this video and my car is a 2013, so three years. I think where you live can play a part too.
CCNP Seth How is the Buick holding up so far.
What is the parking light bulb part number ?
Sorry this video is not about the parking light bulb because it differs from the headlight bulb. But your local auto part store should tell you the part number
Great video,Good job,but I have to say- Buick is JUNK…Junk and more JUNK. I myself will never buy the trash. However my sister needs her junk fixed AGAIN,so thanks for the video…
So... I gotta jack the car up and remove the tire... to change a light bulb?!?!?
🤯🤯🤯
Are you sure I don't need to take apart the transmission?
you dont have to remove the tire. there are videos out there showing you that all you need to do is turn the wheel but you wont have as much space to work with. and you can take the transmission apart if you want to. that will probably make your lights shine brighter.
@@sethsouza8987
Thank you. After doing quite a bit of searching, it turns out this video is actually one of the simplest ones. For this reason alone, I regret buying a Buick.
I really liked this car until the headlights went out, I hope the rest of the usually easy repairs aren’t as big of a pain in the ass , I thought the first video I watched was a joke but no... it’s going to take me an hour to change a damn headlight bulb
Dez nuts
we been trying to change it but can't get the bulb from the harness.. any suggestions?
Did you twist the black tab counter clockwise? that black tab twists and clamps down on the metal arms to hold the bulb
@8:50 of the video
yes I got the bulb out the harness on the vehicle I couldn't get the actual bulb from the cable to replace it.
@9:40, you couldn't unplug that cable? you shouldn't be pulling on the glass part of the bulb at all.
I didnt touch the glass at all it was hanging just like yours then I went to remove it . It wouldn't budge. I tried moving it side to side back and forward nothing.
Why not go under the hood and remove the engine cover? That's a lot faster and safer than removing the tire.
Never thought about that. Is it easier?
nmoore1978 because it’s a very tight spot from the top and you cannot see what you are doing. It would all be done by feel and it’s a very delicate bulb. I tried that method and switched to tire method. You have way more room to work and have the benefit of seeing what you’re doing.
You waste time