With the speed that you have approached that roundabout was definitely over the safe limit especially in wet roads. It's a lesson to learn for everyone. Other than that I'm happy that you managed repairing the car.
Probably played Need For Speed right before getting into the car where - as we all know - you can batter the sh!t out of cars and straighten any roundabout or turn. In reality you will pay the price.
Well done saved the day again. :) Good job it wasn't an insurance job as they probably would have wrote the car off. Think you will be lucky to find a replacement identical wheel. What make and spec are the wheels? I'll have a look about see if I can find one. If not what size are the tyres (they look quite new) and will see if somebody has a set of alloys if you have no joy finding one of the originals.
The wheels are ATS cups size 15” 6j et35 100pcd, there are more 7j wheels for sale, might go eurostyle and stretch the tyres if I can’t get a replacement 😂thanks for the help 👍🏻👍🏻🛠
Shame about hitting the kerb but made a useful video. Hopefully I won't need to replace my rear axle beam, but handy seeing how those pesky rear brake shoes come off and go back on. Thanks 👍
@@aaanton11 No problems,High millage car so I thought id replace them. Christmas project while on holiday. Did all the fronts apart from ARB six months back.
Thought about this too as I'm thinking of taking the axle off the car to treat rust and paint up (both axle and underbody) as will make it a fair bit easier. No play in the bushes but they look a bit naff. Did you replace yours in the end?
Just like a Yaris Mk1 except for the back exhaust.I did my rear shocks and coil springs 3 months ago,it is that easy to do.Never done my rear brakes thou for that reason...fiddly isn't me or for me.Nice job and nice video.QUESTION- My Yaris never had a retainer screw for the drums,is it bad not to have them?
there's nothing more painful than watching a wheel slam into a curb. My dad was dropping me off somewhere when i was younger and it was extremely icy. Next thing we know, we're going round a corner but sideways, and we slam into the curb. It was like the car all of sudden became onset with rickets it was that wobbly XD. What hurts more is we we're only going about 8MPH and the car was somewhat expensive.
I don’t rate them, fitting a k&n Filter is just as good, the vvt needs a good intake swirl, the standard air box delivers this, by removing it you loose power, thanks for the great comments 👍🏻👍🏻🛠
Alright fella only just found your channel by mistake but found your videos good are you a good D I Y er or a real mechanic I noticed uv got a good battery gun and rachet and a pit in your garage which is more than most d I y guys have
![How to change front suspension arm / front control arm on PEUGEOT 107 1 (PM, PN) [TUTORIAL AUTODOC]](/img/n.gif)
Had to replace my rusty axle, failed the MOT, this video made the job so much easier, many thanks.
Thanks for the great comments👍🏻👍🏻🛠
With the speed that you have approached that roundabout was definitely over the safe limit especially in wet roads. It's a lesson to learn for everyone. Other than that I'm happy that you managed repairing the car.
Very true! Thanks for the great comments👍🏻👍🏻🛠
Great video. I'm thinking about dropping the rear subframe to tackle the rust back there to avoid any future MOT issues.
Thanks for the great information👍🏻👍🏻🛠
Thankyou for an excellent video! Really Made my task much easier!:)
Glad it helped! Thanks for the great comments👍🏻👍🏻🛠
Thanks for a great video (Portugal)
Glad you liked it! Thanks for the great comments👍🏻👍🏻🛠
whoever was driving that car was driving like a nuttah
Thanks for the great comments👍🏻👍🏻🛠
Probably played Need For Speed right before getting into the car where - as we all know - you can batter the sh!t out of cars and straighten any roundabout or turn. In reality you will pay the price.
Marvellous job, I learned a lot from that!
Thanks for the great comments👍🏻👍🏻🛠
Well done saved the day again. :) Good job it wasn't an insurance job as they probably would have wrote the car off.
Think you will be lucky to find a replacement identical wheel. What make and spec are the wheels? I'll have a look about see if I can find one. If not what size are the tyres (they look quite new) and will see if somebody has a set of alloys if you have no joy finding one of the originals.
The wheels are ATS cups size 15” 6j et35 100pcd, there are more 7j wheels for sale, might go eurostyle and stretch the tyres if I can’t get a replacement 😂thanks for the help 👍🏻👍🏻🛠
Shame about hitting the kerb but made a useful video. Hopefully I won't need to replace my rear axle beam, but handy seeing how those pesky rear brake shoes come off and go back on. Thanks 👍
Could have been a lot worse, he could have ditched it, thankfully all ok and yes a great video 😂😂👍🏻Thanks for the great comments 👍🏻🛠🛠
Brilliant .Makes it possible for ordinary guy to do it
Thanks for the great comments👍🏻👍🏻🛠
Hi Anton, Any videos coming up on changing rear beam bushes. Thanks
They don’t usually fail Gary, are you having issues Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 No problems,High millage car so I thought id replace them. Christmas project while on holiday. Did all the fronts apart from ARB six months back.
Thought about this too as I'm thinking of taking the axle off the car to treat rust and paint up (both axle and underbody) as will make it a fair bit easier. No play in the bushes but they look a bit naff. Did you replace yours in the end?
Just like a Yaris Mk1 except for the back exhaust.I did my rear shocks and coil springs 3 months ago,it is that easy to do.Never done my rear brakes thou for that reason...fiddly isn't me or for me.Nice job and nice video.QUESTION- My Yaris never had a retainer screw for the drums,is it bad not to have them?
no the retainer screw only only has a purpose when the wheels are off, so don't worry. Thanks for the great comments👍🏻👍🏻🛠
Quick light sand paper on the brake shoes while there off won't go a miss get rid of any crap good video like watching
Thanks for the great comments👍🏻👍🏻🛠
hmmm wonder if this is whats up with mine off side rear wheel sticks out more than near side tire rubs round corners and with any one in back
Sounds Like it, Thanks for the great comments👍🏻👍🏻🛠
Great content on this video. Have you did any videos on radiator change on this vehicle.
not yet, but you never know what's around the corner Thanks for the great comments👍🏻👍🏻🛠
there's nothing more painful than watching a wheel slam into a curb. My dad was dropping me off somewhere when i was younger and it was extremely icy. Next thing we know, we're going round a corner but sideways, and we slam into the curb. It was like the car all of sudden became onset with rickets it was that wobbly XD. What hurts more is we we're only going about 8MPH and the car was somewhat expensive.
You might like this one too!! th-cam.com/video/r8k7nBufiLc/w-d-xo.html
Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 yep, thats pretty much exactly what happened. Another great video
Lol. Shot straight across all lanes lol going abit quick
Could have been very nasty, thankfully he was ok 👌, thanks for the great comments 👍🏻👍🏻🛠
Do you reckon you could fit an air induction kit to the 107 next?
I don’t rate them, fitting a k&n Filter is just as good, the vvt needs a good intake swirl, the standard air box delivers this, by removing it you loose power, thanks for the great comments 👍🏻👍🏻🛠
@@aaanton11 I'll have a look what's out there, thanks for the reply👍
👋
Thanks for the great comments👍🏻👍🏻🛠
Will 16" rims fit on my Peugoet 107?
you can fit 16" but you will also need skinny low profile tyres,Thanks for the great comments👍🏻👍🏻🛠
retainer screw is what size ?
which retainer screw? Thanks for the great comments👍🏻👍🏻🛠
Briliant am ina same situation vifeo is just want i was looking for thr job on my aygo
Thanks for the great comments👍🏻👍🏻🛠
Alright fella only just found your channel by mistake but found your videos good are you a good D I Y er or a real mechanic I noticed uv got a good battery gun and rachet and a pit in your garage which is more than most d I y guys have
Unfortunately I am a real mechanic, 😂 Thanks for the great comments👍🏻👍🏻🛠
First view and comment!
Great, thanks for the great comments 👍🏻👍🏻🛠
Err I reckon that's what comes of driving too fast!
correct! Thanks for the great comments👍🏻👍🏻🛠.
@@aaanton11 You were lucky you didn't roll it, the road were damp as well!
done very good and very nasty, rust, and flith, not my way of working on a car
Thanks for the great comments👍🏻👍🏻🛠