I Removed My Whitestone Dome Glass! Samsung S10+ | New Install Method and Tips
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- This is how to remove the dome glass from the s10+ and how to use the new install method for fingerprint to work accurately
Get it here: amzn.to/2ET7PC8
SUBSCRIBE here, it's FREE! : goo.gl/kNbs3J
Our Amazon Store for everything we review
www.amazon.com...
-------------- FOLLOW ME ON SOCIAL MEDIA ----------------
Twitter: / ebpmanreview
Google+ plus.google.co...
Facebook: / ebpman
Instagram: / ebpman_reviews
My VPN PureVPN
My VPN billing.purevp...
Help Support EBPMAN Tech Reviews Channel
on Patreon for as little as $1
/ ebpman
Companies can send products for review by contacting:
ebpmanreviews@gmail.com
- EBPMAN Tech Reviews ♛
- ebpman
#s10 #s10plus #whitestone #glass
#ebpman #ebpmantech #ebpmantechreviews galaxy s10 how to install whitestone dome galaxy s10 screen protector galaxy s10e note 9 galaxy s10 unboxing
This is a quick video on removal of the dome glass and new install method for fingerprint accuracy.
I wish all install videos were as quick as your current video.
was the uv glue really strong?
Interesting that your box has a different Whitestone Logo than what's sold on Amazon.. any insight to why there's a difference??
do u have to do the fingerprint accuracy for the note 10 or 10+
Just use a hairdryer on low to heat up the adhesive, comes right off without having to shatter the screen or have it crack. Ive used this method everytime and never had a problem
This process works better if you cure the top & bottom for 15 seconds, and then press down firmly on the fingerprint scanner while you UV the top for 60 seconds and then the bottom (with your thumb still pressing down) for 60 seconds. After you've done that take your thumb away and UV the bottom for another 60 seconds.
This will help make the layer of adhesive at the fingerprint scanner as thin as possible so the scanner is as accurate as it can be.
The amFilm UV Glass kit comes with a small weight to out over the fingerprint scanner for just this reason.
Followed all the procedures, but my Whitestone glass on s10 plus doesn't work. Keeps saying ”cover the whole sensor" or "press harder".
thanks, was on the fence, but really wanted a proper screen protector. just ordered one for my s10
It works even slower with this protector.
This is the method that Whitestone has in their video, I didn't think it would be a problem but it is. My question is did you use the same screen protector for the install?
Awesome as always. Watched this when it was released but needed a refresher. Thank you
Awesome thanks a lot, it worked flawlessly
Where can I get that wallpaper that's on your lockscreen?
Curious why did you cure bottom, top then middle? Wouldn’t starting in the middle first then top or bottom be best? Not saying it wrong just wonder why in that order.
Why crack a $60 protector when you can slide playing card under and remove without cracking, clean and reuse... Also you should leave the glue in the bridge longer as there's always 3 or 4 extra drops that come out. And I cure mine for about 20 minutes under uv light, if not they always lift or spider web underneath 👌👌
Ok but how did you remove the adhesive from the protector before re-applying it?
He didn't use the same protector. You can see that he cracks the first one taking it off, and the one he puts back on is whole.
My fi gerprint reader just doesn't work with my dome glass and yes I added new fingerprints and I removed the plastic screen protector that came with my s10÷ HELP
I'm sorry to bug I followed you on install several times, success. Nevertheless how did you clean the screen protector successfully prior to re install. Also besides the install, what is the clock and weather app do you running on the mite 10 plus, that was an awesome app.
Here is a tip for those of you having problem with the fingerprint sensor, register using your finger "TIP", not the entire let's say your thumb, the pressure doesn't make any difference, but more of the movement of the surface of the skin when you press your finger on the screen. There is an extra layer with the dome glass so using only the tip of your finger will give more stability & smaller area for the ultrasonic scanner to read.
* i didn't press the sensor during the curing process, and it's working just fine
If you want to remove the screen protector on easy mode, use a hair dryer to warm up the screen and you should be able to remove the glass easily without it cracking.
always check added finger prints first under finger print settings to see which profile is the best before putting glass on
why not just change the samsung setting to make it more sensitive to touch?
The new process is to make sure the sonic piece can read your finger. It's a bit different than touch. Atleast that's what the folks from whitestonedome told ne
EBPMAN Tech Reviews indeed you are right but using a smartphone is a whole lot more with touch after you are logged in.
How do you recommend to clean the glass full of glue?
Wipe it down with alcohol
Soo how do I get new glass the package only comes with one.. do I need to try the worinte or do they offer replacement kits with glass and adhesive?
Good video. Thank you.
This is different from your video for the Note 10+ - which I followed to a flawless install. Why? Note 10+ does not include the "pressing the fingerprint sensor for a minute" or the UV in the center of the mobile. Again, why?
So I can remove it and put it back on ? I installed it today and the bottom of the installed screen protector looks like it's getting inside dust. Also I messed up the center part of the bubble when I first did it but it seemed to be okay now it looks like it's going to come off.
Should you register your print before the glass protector or after?
always re-register after changing anything related to the fingerprint sensors.
Do it two times before and two times after
@@israelcalderon7357 . So 4 prints with same thumb?
@@jat-justamaturetech-philpj8285 its going to be better and unlock the phone faster
Do you know you can reuse the same old glass if you dont break it. First removed the old glue with your finger then use Klean Strip Acetone, 1qt to clean the glass.
do you use the same domeglass installed before or a new? in case that you use the old domeglass how do you clean it?
No it will crack. So it would be a new
Thanks, nice video!
This is a major question pls reply. Did the oliophobic coating went off when you took it apart or it stayed?
I didn't notice any addition finger prints when using the phone with out the protector. But didn't use is for more than an hour with out it.
What kind of cases can I use with Whitestone dome glass for S20+?
It's the adhesive used a kind of rubber cement glue? Does is job but vibes of really w/o damaging the surface.
Don't know what type of glue but it doesn't damage the screen that I can tell. I have had them for years
its LOCA glue
fingerprint is actually worked for few hours, after that it will not work.
I got the glass back off, but how do I get the glue off the removed screen protector?
peel it off with fingers carefully, like you'd do with sticker adhesive
I used cotton balls and 90% isopropyl alcohol
My finger print works fine after i reregistered them
I wonder if bubbles will form on the part you pressed?
bubbles can't form where there is no air.
insanebmxthomas I would like to think that, my protector started getting bubbles all over even tho whenni installed and cured it I had 0 signs
@@sasboi3154 oh so you mean after it cures? i meant you can't 'create' bubbles by pushing down, as long as there is no air to begin with. Can't answer your question. But i doubt that pressing down has even the slightest effect. Maybe if you cure *while* pressing down, but i expect the glass layer to flex back instantly.
I did this and when getting old glue off it came off like an adhesive film instead of glue. Huh??? Anyone else? And no 100% it wasnt the preinstalled protector
I'm done. It doesn't work at all for me. Contact the customers service but never get respond from them. What a waste of 50$. Now I'm using no screen protector.
Make sure you do the middle of you're finger first then when it shows you to do the tips do it. Also if you notice you can add more than one finger print. Add the same finger like 3 times it will be more accurate. It does work. I got frustrated at first but it was the way I was doing it. Make sure when you do it to watch the little finger print sign it will show you how to do it. Do the middle of you're thumb first then last 20% do eack side and tip.
@@danielbeavers8701 it won't even register my fingerprint to set a fingerprint.. Samsung is going to put these boys out of business
Simply irresponsible of whitestone to advertise and sell this product without this process included in their instructions. I did a video on this failed product for those who didn't have this procedure included in their instructions from the company. Also, they are not offering warranty replacements for the fingerprint sensor not working.
I checked, four years ago it states in their Q&A how to remove the glass, on their website. So, yeah.
Pure snake oil in this video
2019, and people are still wasting money on screen protectors. You do not need them and their protection is minimal.
Not when the phone is dropped on the glass or scratched by sand-like particles... The screenprotector will always break/scratch first and it's way cheaper than getting a new screen and losing water resistance in the procecess ;)