Install it RIGHT! Whitestone Dome Glass for Samsung Galaxy Note 10 Plus
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- First, the fingerprint sensor works if you follow my steps. Make sure you watch the video fully before attempting the install the whitestone dome glass. It works on the Samsung Galaxy Note 10 Plus and Note 10. This is the best screen protector for the note 10 plus.
SEE IF IT's AVAILABLE & UPDATED PRICES:
Get it here: amzn.to/2Zd0YQW
SUBSCRIBE here, it's FREE! : goo.gl/kNbs3J
Our Amazon Store for everything we review
www.amazon.com...
For Business inquiries: ebpmanreviews@gmail.com
My Gear
Canon M50 amzn.to/2K7DDs3
Rode Mic amzn.to/2KCvqLM
Sony A6400 amzn.to/2KAsxuZ
Rode Wireless go amzn.to/2IGPVVh
-------------- FOLLOW ME ON SOCIAL MEDIA ----------------
Twitter: / ebpmanreview
Facebook: / ebpman
Instagram: / ebpman_reviews
My VPN PureVPN
My VPN billing.purevp...
#note10plus #note10glass #note10plusprotector
#ebpman #ebpmantech #ebpmantechreviews
DISCLOSURE ‣ I was provided with the Whitestone Dome Glass Screen Protector for review purposes. All thoughts and opinions expressed herein are my own and not influenced by the developing company, and/ or its affiliates, in any way. Some links provided above are affiliate links. As an Amazon Associate I earn from qualifying purchases. Honesty is key on my channel, thank you for supporting me! note 10 plus cases galaxy note 10 plus samsung galaxy note 10 plus
Hi All. In Settings go to Display and and turn on "Touch Sensitivity". This is an option for phones with tempered glass. I did this and fingerprint recognition worked like a charm. No more hard pressing.
Missed a step. After the first cure, supposed to press for 1minute near the fingerprint scanner, then follow through with step 2. The fingerprint scanner will work much better.. The website has been updated with new instructions also. Hope this helps others
That explains why my phone isn't reading my finger print well and it's getting aggravating.
Correct.
do uguys have a link i went to the website and they dont explain anything about the fingerprint sensor
I actually broke my protector dropping my phone at ups today but luckily I bought the 2 pack and like new again 1hr later when I made it home. With perfectly working finger print recognition
@@ferocity1054 even the demo of Whitestone itself they didn't do that
Just wanted to leave a note saying thank you so much for this video! I watched it once while waiting for my protector to arrive, then again while going through the install. Made me feel a lot more comfortable with the entire process, and the screen protector install went flawlessly!
The spread out of the liquid for me took a LOT longer than 20 seconds...more like 5 minutes but it did eventually make its way all the way around. I did end up with the teeniest tiniest air bubble that I used the pull out tab plastic piece to squeegee to the edge of the glass and removed successfully prior to curing. One other thing that I read on XDA was that if you go with a glass protector to switch out the black pen nib with the white one that came in the box. I believe it's a harder tip and provides less resistance on the glass.
Thanks again for this extremely helpful video guide.
I just did the install on my Note 10+ while following along this video. Had to redo the glue because a bubble formed. However, with enough cleaning the second attempt was PERFECT. I'm very relieved and excited to see a perfectly installed cover. My OCD has been soothed and this just feels great knowing I won't scratch the phone screen over time with the S Pen. A big THANK YOU!!
you were scared to scratch the screen with the s-pen?!
As with anything, preparation is key. I really appreciate how thorough you go thru each step.
I waited for nearly a year before installing a Whitestone Dome Glass screen protector on my Note 10+ because I was intimidated by the number of steps. I shouldn't have been. The results are pretty impressive.
The pack I ordered had two tempered glass screen protectors. I saved the spare in case something happened, and it did. Last week, I dropped my phone. The screen protector chipped but the phone screen was saved. Today, I installed the second screen protector. I set up this video on the TV, sat at the coffee table, and followed your step by step guidelines again. Even tho it was the second install, I found following along really helpful.
Thanks!
My OCD was screaming, "Put the light on the middle of the screen too!" Lol
Lol same here. So I cheated a bit in the 2nd 60-second interval and slid the light a bit closer to the middle just to ease my concern
Omg me too
Ditto!
Why? The amount of light from the top and bottom hitting the middle part at an angle combined should equate to the direct light.
@@kpp28 It "should" work. That doesn't cut it for someone who needs things to definitely be perfect. Lol
Thank you for making this video!!! I installed it using your instructions. It was easy. The fumes from that liquid is loud! Once again thank you.
It does smell. When I did it the first time I used glove but now I just roll with it. Glad it worked for you
This was absolutely nerve wracking but a complete success thanks to your video. Your voice gives confidence to do this.
Fantastic and comprehensive tutorial video!!! I would recommend mentioning the importance of choosing a surface that is as level as possible. Lol my first attempt was botched (user error). I helplessly watched as the liquid adhesive rushed off of the phone, because i used a surface that i assumed was level.
Definitely 👍 a must watch video!!!!!!
thank you I've installed these two times before this third time, this was the best video I've seen. Came out perfectly. Just take your time and don't rush it. It is a little stressful - for me - when you have the adhesive on the screen and you're committed to it. If I can do this on a boat (I liveaboard) then it is doable on land. :) Just get a torpedo level to make sure you're completely level for your workspace - prep and take your time. Its the best install for me yet! Thank you.
The world
I used this video to walk through my setup last night. I was SSSOOO paranoid that it actually took me 45 minutes. Lol.
Super simple and easy to do. Got it right on the first try.
Thank you bro. I nailed the install on the 1st attempt with beads of sweat 😰 on my face 😂 😂 😂
How has it held up?
i just installed the whitestone right nw. no issues mine was missing the suction but i never really needed it, and the fingerprint sensor works fine....i did use a few tips from the comments here. one recommended to leave the liquid on a lil longer before u start curing, allowing the liquid to get to all four corners just need time and patience
Wow, an install video that actually follows the directions. LMBO!
FYI, there's one thing not mentioned.
There's a reason why that piece with a suction cup/glue circle guide attachment is super thick and heavy. It helps push down on the screen enough to disperse the glue more efficiently and enough pressure to make sure finger print sensor can function without registering your prints. Hence why he didn't have to re-register his prints and you don't have to push down in it after curing for this version.
Thanks for this video! I screwed it up the first time.. after pouring the glue it all leaked down the side while I wasn't paying attention (fiddling with the suction cup piece). I cleaned up my phone and the frame and tried again more carefully this time and it turned out perfect!
I had a much cleaner install with my note 10+ than with my note 9. I just installed while watching your video. My finger print works still. Thanks for your video installation of white stone dome glass.
Expensive glass with the perfect video to match that price. Professionalism is what makes me happy. Perfect in every way, flawless installation. Thank you!
BEST tutorial for Whitestone Dome. I am not tech say but I followed his directions and absolute perfection!
Thanks
Just Installed mine following this video. didn't have to re-register the fingerprint. and no bubbles. great video.
I can't thank you enough! I would not have been able to do this successfully without your patient step-by-step instructions. THANK YOU!
I ordered it after watching this video. I was going to rely on the preinstalled screen protector but after seeing how thin and flimsy it was after you peeled it. I thought to myself that is not going to protect my screen. The phone cost too much money not to buy one.
thankful for the screen protector, bought a second-hand note 10 plus and its screen has a couple of dents from drops.. which cost me less. found this screen protector bought it installed it myself and now it looks bnew. Jez, Inlove with it and the price is worth it.
There was some dust on your lens that appeared to be on the screen. It was bugging the crap out of me. Lol
Fantastic video tutorial! Watched 2x before attempting & had it playing as I installed. A few notable mentions... Prior to turning off, changed fingerprint setting to 'sensitive' [settings>display>touchscreen sensitivity]. Also used small level to make sure work surface was flat. Really took my time setting up & checking for no dust after each step. 1st try mistakenly placed pin that holds screen up between plastic pieces vs. in slot of top piece, so adhesive didn't disburse evenly. Removed screen, washed w/soapy water & wiped phone clean. Try #2 was a success and looks great! After 1st cure, also gently pressed for 1 minute near fingerprint sensor.
I must have watched this now 10 times - I always have it running while I do my screen protector. I know how to do it, but having you take me through it is fabulous. It goes well, and my screen is protected - also, it feels like I get to catch up with you again - hahaha - good thing I'm subbed. Thanks so much for doing this fantastic video!!
Thanks for the stress-free perfect installation instructions. This was my 3rd Whitestone install from Note 8 to 10 plus and you always wanna get it right. Flawless once again. Thanks again
Did a perfect install on my note 10+, checked very thoroughly to make sure. After 24 hours of use, being in my pocket etc, one tiny area on the top left has tiny little bubbles. Not very happy with Whitestone
That's a consequence of not allowing the adhesive to spread properly. I've done 16 of these now on all different phones and never once have I had that issue
Your telling me your not very happy because when YOU did the install bubbles formed? Instead of blaming the product. And seeing that a lot of people are having really good success with it. You just go ahead and blame me anyway. Nice.
Perhaps. Just maybe. You can consider the fact you could have done it better
Yes. Finally, have a screen protector that works. No crackle sound from edges lifting. Fingerprint Sensor that actually works with that awful hole in the middle. Watched the video and decided to replace instead of refund. It's worth the money. Installation had me nervous, but all good thanks for the video.
Fantastic video. I ran it for my entire installation and it was 100%
Thanks for watching. I have this screen protector on ALL my phones
Okay, I watched your video again before installing. Did everything just as the instructions stated and your video, to make sure. I am sorry to say the first attempt did not work. The liquid never made it to the top ever so slightly. About 1/16" to 1/8" all around the top was open. So I watched the "reinstall" video (hoping I would never have to - Ha!) and made the second attempt just like the first, no difference. This time it worked, but still the top portion was the last to fill. I must say that it is very nice, I love it! Thanks again for the good instructions. FYI - I actually set a timer for 60 seconds as you recommended for the light time, but it automatically shut off after 40 seconds.
I rarely leave comments on videos but I'd like to say THANK YOU for this guide! It was my first time to use and install the whitestone dome glass on any phone. I was extremely intimidated and nervous but your guide helped a lot! I was able to install it perfectly! Thank you so much!
This was a great video. I just went to the mall in Burbank California and purchased a glass screen protector from a lady on a kiosk and she installed it in 4 minutes. It was not like the one you installed but this glass is horrible. It's not responsive at all. I told the lady about it, and she mentioned that many people have complained to her about it. I dont think she was thinking when she told me this but I told her if she had complains about it why was she was selling them. She asked if I was not happy she would sale me a plastic protector for 5 dollars, in addition to what I had paid for the crappie protector. Anyways thanks for the great video I will be buying the recommended protector.
I couldn't get it right the first time, clean it again and did the whole process. It looks good !!!
Thanks for walking me through the install. I was nervous about it but it went almost 100% smoothly. My problem was the liquid lol I squeezed it on and turned to get the glass and my liquid disappeared. I thought my surface was level but it wasn't. I cleaned everything up, started again and it went perfectly the second time. My fingerprints still worked too!
Thx for the video. I followed your steps with the addition of pressing and holding fingerprint sensor for 60 sec after 1st 15sec. curing session. I had phenomenal results. The fingerprint sensor works as usual. I also installed the Spigen tough armor case. I now have full protection on my Note 10+.
finally got around to buying and installing this since my factory protector recently got a small gouge (glass was fine underneath luckily!) and your video helped ease my anxiety about it a ton - perfect install on the first try. Oddly, mine didn't include the suction cup so I just used one of the included dust removal stickers to lift that plastic spreader thing. Anyway huge thanks!
Thanks for this vid! I followed you as I was doing the install and it went FLAWLESSLY!!! This is a great product. Even without pressing firmly in between cures, my finger print sensor is working great without having to reregister the print
I always come back to this installation. It's nice. And clear, detailed and easy.
I almost screwed it. Forgot to do the first cure and was taking my phone outside the frame. The screen protector started sliding down. Used the same method as sliding the adhesive around, and navigated the screen protector to its place by tilting the phone. It would have been a disaster if I had used my fingers to place the screen protector back in place. Cured it once, and then took it out.
Damn, these installations are nerve wrecking. Thanks to you, it made life little easier!
Glad to know there is a out of the box protector on it. I won't be able to afford the accessories until about a month after the phone arrives.
Just got my Whitestone Dome Glass installed also, and after installing it, there are two tips I want to share. The first one actually apply to all type of installing screen protector. I find it much easier to have a flash light around when cleaning the screen before installing screen protector. Shining light from a different angle help spot the spec of dust much easier. The second is more specific to this type of installation when trying to level the surface. Just in case you do not have a leveling tool around, as long as your surface is flat and you don't feel that the surface is tilt, this will do. Sometime even when you feel your table is level, it may still be a few degree off. Having a stack a paper (10 sheets will probably do). In this case, after dropping the liquid on the phone surface, if your table isn't level the liquid will start to move. If so, slide a few sheet of papers underneath the plastic tray from the direction the liquid move to. This would rise the bottom of the tray on one side so it become level. Add or remove the amount of paper on one side until the liquid stop moving then you will know that you have the tray leveled. Then gently lift the tray and balance it until you move the liquid back to to the appropriate area then settle the tray back down to where you have it leveled. Then continue the process. Hope this extra tips help the next person.
I don't leave comments but seriously thank you ,saw another video and it didnt work I didnt use the heavy plastic, this video is long but worth it thanks
I followed your instructions to the T and it was perfect, I was so proud of myself, but I had a horrible time trying to register my fingerprints. Kept saying "press a little harder". I'm 6' 2" 240 im afraid im gonna break the glass. It should not be that hard!
You're not the only one. I re registered my prints and is still having problems
What does your height has anything to do with that?
@@angrysasuke3875 He is implying that if he puts all of his weight down on the screen for the fingerprint scanner to work his phone will break.
I just ordered mine. Thank you so much for being so thorough. I just have a question. Why are we not supposed to cure it in the center as well??
Read the above comments. They updated the instructions
Thank you so much! I followed this video as I installed mine and it came out flawlessly!!
Thanks for the detailed tutorial. All the others I've seen never really showed how the speaker covers line up with the tray, resulting in a messed up first install due to I had the speaker cover in it too much. Second install went without a hitch. Thanks again for the detailed tutorial 👍
I'm not saying my fingerprint sensor works better w the liquid glass protector, but what I am saying is my sensor and responsiveness of my Note 10 + work better after installing the protector, turning the sensitivity up, and double adding my thumbprint. Win/win.... best protector ever
Great video! Followed this step by step and never used the instructions... perfect install.
I've been using these for a while as well. I find that dabbing the entire screen a few times over with the dust removing stickers has so far helped me get a perfect install with nothing in between.
Successful first install! Thanks for the video.
Your guide helped a lot. Had to pause a lot, and looks like they changed their kit ever so slightly, but it did indeed work.
This was the third "how to" I reviewed and you did an excellent job compared to the others. The close ups also added more information. For one, I could not tell where to actually put the speaker tape until you showed the close up. Also the warning to have all the liquid in one puddle and the other tips you mentioned helped give more insight before my installation. Thank you!
On the very edge of the screen so the liquids don't flow over the edges & into the speakers. Not on the speakers...just in front of them to block the glue.
Preorder my dome glass from the official website and got a big discount for them, I order a 2 pack for me and my wife it was on sale with a preorder discount and I paid 2 day shipping all together I paid $61 dollars for 2 whitestone dome glass which is amazing for me, on Amazon they cost alot more, just waiting on them to ship around September the 9th.
THE BEST tutorial ever! You saved me from making an expensive mistake! Thank you!
After watching the install video several times I finally decided to do the install, and thanks to you it was perfect for my first time install
Can you make a video that help if something goes wrong with the first attempt i mean since that includes two bottles of glue how i do if the first one goes wrong how i clean or something
Great suggestion. Let me see what I can do. It may not be this brand of phone. Maybe with the iPhone 11.
@@ebpman I'd l I'm like to see that too. I put one on my galaxy Note 10 + and in a couple days it's coming off already so I need to redo it.
@@Atljeepboy ouch, that sucks
@@gotammo9148 all turned out ok. I registered and got another replacement kit for $10 and got it now.
@@Atljeepboy Is it still working?
Followed along with your video and I got it perfectly installed the first time!! Thank you!! I advise everyone to cover every hole on the phone I did have a bit of spillage that almost got into the bottom. Other than that this was super easy with the way he explained. The instructions on the box are no help at all fyi lol
Having the Whitestone Dome Glass on the Note 10+, is it still compatible with the different Spigen cases? I plan to buy this tempered glass for my Note 10+ and i already have the Spigen slim armor. I'm just afraid it might not be compatible.
I'm in the same case, anyone knows if it fits ??
This thing IS expensive. I have had this for about 18 months without installing it because there are many videos on this and the comments where there are mistakes made. But THIS video of all them did gave me the confidence that if the instructions are followed, it can be done. I installed mine finally just now and flawlessly. You just can't be in a hurry and your environment needs to be clean and dust-free. I have to agree with @kyle duddleston...my OCD kicked in too! Put the light on the middle area too! LOL
Between this video and the updated Whitestone video, installation was easy! Thanks. The only extra step I did was applying my finger on the finger sensor area for 1 minute like Whitestone suggests.
My install went flawlessly after reading the instructions several times. However there was no mention of the alignment tool in the instructions. I was wondering what that piece of plastic and suction cup for for LOL. Unfortunately about two days ago, after my fingerprint sensor became somewhat temperamental I noticed a hairline crack right over my fingerprint sensor, so I'm about to find out how good they are at honoring their warranty...
And yes, I'm about to watch your Whitestone screen protector removal video
They are awesome with warranty I screwed up installing mine and the sent me a new one even though it was my fault
i had horrible luck with screen protectors on this phone. ive had it a month and this is the third one ive bought. the first one was put on incorrectly by the att rep and of course they couldnt find me in the system after i lost my receipt. funny how everything i got was there minus the screen protector. second, i ordered the wrong one from amazon, and finally i decided to go all out and ordered this one. after reading the instructions i was sure id mess up with the install. glad i watched this video first because it went perfectly. now i just hope it lasts..
Hey , nice video simple and thorough, I have used this screen protector on my note 9 and 10 plus and love it, with the exception that my screen protector won't read my finger prints and I won't redo the install because I'd have to buy another kit.. how many out there are having the same issue? Whitestone has not replied to email over 2 weeks ago.
Yes, the install was flawless, no issues at all.
The best tutorial to apply this glass!! Thanks a lot!
Waited patiently for your video
My first Install my finger print sensor barley worked had to press really hard, Screen Protector Sensitivity was turned on. Second time Around I put the Dust Sticker over the Finger Print Sensor while using the UV light to protect the sensor! Sensor works perfectly now!! 👍🏼👌🏼
Great job! I’ll be trying this screen protector in my next phone. I’m also following you on your other channels as well. I usually use the Zagg covers but I’ll look into this one for the next phone I’ll get. Just not sure which iPhone model yet.
It works, however you have to re do the first her print......I put mine and I'm upset I did a perfect set up and the left corner had spider webs and did t stick properly after all the pre, clean space and super clean phone!
Just wanted to say thank this video help me out and did it with no problems
Awesome video, flawless application. Totally worth the money
It takes way longer with this screen protector to unlock via fingerprint.
Loud and clear! I followed your instruction and did a awesome job! Thank you so much.
Discovered your excellent video tonight. Thanks for your step by step instructions! I needed every single one.
A couple of suggestions -- It would have been helpful to know that the phone fits in the bottom plastic tray and the top tray is added in a later step. And it would be good to know that the flexible screen that fits over the liquid glass has a film that needs to be removed and that it's curved to fit the phone's screen.
As a newbie to Whitestone Dome Glass products, the entire process was intimidating but you made it doable. Mine turned out perfectly, thanks to you.
It says dome, so unless you are an utter moron then it is quite obvious it is curved.....Just wow!
*Just one detail he forgot to mention: after the first cure, you need to press the fingerprint scanner for 1 minute! This will make your fingerprint scanner way more fast and efficient ! ;)
Very useful video !! I was thinking building this but after this video no way 😂
Much better than the official video. Thank You.
very helpful installed first time without needing to read the manual. thanks
Wow, this is such a ridiculously complex process. Oh well, I suppose it'll be worth it. Ordering one now.
Just received my Whitestone Dome today.
After wiping it down after the 15 sec cure w up light, you have to do it again for 1 min on top and bottom then another min again on top and bottom. So total curing time is 135 seconds top and bottom. And middle is optional
that is a job well done and its a beautiful looking screen protector, its like its not even there. i am definitely considering getting one!
Got it right, fits perfect on my uag case. Top side of glass seems to be perfectly fit to the case.. No space
Thanks a million for the video was able to successfully install the tempered glass with no issues.
For anyone wondering about the case he uses at the end. It’s the Samsung - S-View Flip Cover Case
Thank you. Just asked that question then started scrolling through comments to see if anyone knew. Any chance you know the watch he's wearing too?
@@LoneWolf-hb8sk Not sure, scrolling through for a quick glance I'd guess it's a Garmin, but maybe an older Galaxy watch?
are you not supposed to cure the middle of the screen protector?
I thing because the top/bottom r the most likely to lift. On the 3rd cure I did the center too. No issue here.
One of the best installation videos of this product I have seen. Quick and to the point easy to understand. My only question as I await the arrival of mine is placing the protector on the phone in the tray. How to make sure its lined up right. I guess you use the bottom end to place it then drop the top end down.
Just one detail he forgot to mention: after the first cure, you need to press the fingerprint scanner for 1 minute! This will make your fingerprint scanner way more fast and efficient ! ;)
brianminkc Just one detail he forgot to mention: after the first cure, you need to press the fingerprint scanner for 1 minute! This will make your fingerprint scanner way more fast and efficient ! ;)
I bought it. Bought one for my 8 also, but never installed it. I don't trust myself.... I need to get brave.
Unless they've changed their warranty program for the newer phones, my purchase came with a lifetime warranty where I submit a warranty request online and they send me another install kit (minus the UV light) for $10. The warranty also covers a bad installation. So well the initial purchase definitely is usually expensive, if you screw up the install, you should still be covered under warranty and not have to buy a fresh kit, but rather request one through warranty.
Thanks for video, helped me do a perfect install first time on note 10 +
I watched the Whitestone install video, then this one, and thanks for your much-more-detailed directions! The Whitestone install video says to put some small strips of black tape included with the kit across the top and bottom and down the sides of the phone as the first step, but your video doesn't show anything like that, and the kit I received didn't have any small strips of black tape in the box. Is there something else I should/could use to protect the top/bottom/sides of the phone, or is that step just totally unnecessary? Thanks!
Finally put mines on; looks so great. Because of you, I did a great job😉
This worked like a charm!!! Excellent instruction. Thank you.
Does this Whitestone Dome Glass cover all the edge of the note10+ ?? Because I've been looking for the best screen protector for my note10+ and i cant decide which one to buy.. preferably the one that can cover as much of the edge of the phone.. if possible a screen protector that reaches the aluminum body of the phone.
For glass it's impossible. If u want trying googling for clearplex and their process. See if its available in ur local handphone shop. For Edge screen u need u silicone / gel kind of protector cauze its fits and mould to the screen wherelse glass does not and for glass eventually u can see dust particle start to set on the edge after some time.
U can also look for uzien or x-one screen protector
When placing the screen, do I have to align it according to the screen, or does the tray guide me by placing it against the bottom of the tray.
The tray places it
I'm going to assume you've already done it though lol
Everything is done well as per your video and instructions..but which clear case do you recommend would fit well without pushing the screen protector...i did see your review on clear cases...so which one of those would you recommend so that its higher on the edges and not push the screen protector...
This is a fantastic video. I followed along and got a perfect installation. Thank you very much.
Awesome video...very helpful for my install! What case is that at the end of the video? Can't seem to find it
Thanks for the video. Since there was no intent to cover the front camera lense, will the liquid fill that lense area and is that something to be concerned about?
One of the best Whitestone screen protector installation video 👌👍
For much better results.... u only cure the top half first for 30s, then place your thumb on the sensor and press as hard as you can while u are curing over your thumb for 30s, remove your thumb and cure where your thumb was......this will allow the sensor to read your thumb 100% more accurate....hope this helps any one having trouble.....side note same process with the s10plus