Any tips regarding how to install the ghostlabs42 wand upgrades? I installed the pack lights and soundboard but am a little nervous about the small cuts required to make the vent holes, add the switches, LED, etc…
Hello it took a long time but I recommend a cordless Dremel or similar tool to hollow out the vent holes. Then I used small hobby files to round everything out. I really need to make a wand video for everyone out there. I’ll try and get one done soonest.
I was trying to remove the sounds completely from the default pack so I can just have the lights, would I just disconnect the speaker or would I have to do something else?
Hi man , Your Protón Pack is the one of my dreams , Really good Job! I was wondering if there is a way to plug my smoke machine into the pack , for when the vent sequence starts, the smoke also starts. Thanks. PD: Please make the video about the wand :)
They attach to a portion of the wand which you have to take apart and drill some new holes into. They other end attaches to the inside of the proton pack with a nut, screw and washer. His kits come with everything you need to attach it.
Im modding my pack its almost dome i just dont have lights but i only need pack lights no wand kit lights or sound just lights and id prefer if it was battery operated do you know any lights that are like that ?
Love the videos man, would you happen to have all the links to these items of the products to upgrade the spirit Halloween proton pack. Both the pack and the wand. Please can you send me them. Thanks and much appreciated 👍🏻👍🏻
Are you referring to test mode in the pack board, or in the wand board? There are two different boards, one in each. There is a jumper on the printed circuit board in the wand, it says TEST. It needs to be set to open, in other words don't have anything connected to it.
If it's the board in the proton pack itself, there is a jumper on the board which says TEST. Make sure that the jumper is not covering both pins. If it is will be stuck in test mode.
hello I see that you have the same electronic kit as me I plugged them in last week and then I walked with the lights and the sound bug and the indicator light on the sound card is blinking can you help me please
Bought it on eBay... see link: www.ebay.com/sch/sis.html?_nkw=Rothco+ALICE+Pack+Aluminum+Frame+With+Attachments+20%22+-+Fits+GI+LC-1+Packs&_id=202637137676&&_trksid=p2057872.m2749.l46251
@@suzyorosco2642 Which trigger are you referring to? The Activation button? That needs to be hooked up the board in the wand. Also make sure you didn't pinch the wires when you installed it or damaged the wiring there, it's a really tight fit that requires some holes and filing.
@@superactionguy6000 the firing trigger was working on the wand and turning the sound on but now the sound or trigger doesn't work. Is it possible that the speaker shorted out.
did the same with mine. upgraded the tip of the wand though and went with the v clip to attach wand to pack. absolutely love it.
I’ll probably be doing both of those myself. I like the v-hook more so than the magnet.
Spongefacemcgee has a Alice frame mount kit
Okay thanks, that would help a ton!
@@superactionguy6000 everything on my proton pack came from him, just recently got his trap upgrade kit
Any tips regarding how to install the ghostlabs42 wand upgrades? I installed the pack lights and soundboard but am a little nervous about the small cuts required to make the vent holes, add the switches, LED, etc…
Hello it took a long time but I recommend a cordless Dremel or similar tool to hollow out the vent holes. Then I used small hobby files to round everything out. I really need to make a wand video for everyone out there. I’ll try and get one done soonest.
I was trying to remove the sounds completely from the default pack so I can just have the lights, would I just disconnect the speaker or would I have to do something else?
If you just disconnect the speaker you should be good to go.
Hi man ,
Your Protón Pack is the one of my dreams , Really good Job!
I was wondering if there is a way to plug my smoke machine into the pack , for when the vent sequence starts, the smoke also starts.
Thanks.
PD: Please make the video about the wand :)
I know there are people that have done it on TH-cam but unfortunately, I'm not certain how that's done.
You could use a aerosol can and sprayer combo but it would run out probally
This pack is awesome 😎
Where can I get these kits from
How do the magnets attach to the pack and the wand?
They attach to a portion of the wand which you have to take apart and drill some new holes into. They other end attaches to the inside of the proton pack with a nut, screw and washer. His kits come with everything you need to attach it.
@@superactionguy6000 thanks so much
We fixed the lights and everything but now the trigger doesn’t work
And the sound doesn’t work either
Im modding my pack its almost dome i just dont have lights but i only need pack lights no wand kit lights or sound just lights and id prefer if it was battery operated do you know any lights that are like that ?
I got mine from here: www.ebay.com/str/GhostLab42?_trksid=p2047675.l2563
Love the videos man, would you happen to have all the links to these items of the products to upgrade the spirit Halloween proton pack. Both the pack and the wand. Please can you send me them. Thanks and much appreciated 👍🏻👍🏻
Hello! All the parts I used were purchased from Spongefacemcgee on eBay: www.ebay.com/str/ghostlab42
@@superactionguy6000 thanks much appreciated
How do you turn off test mode in the wand my son needs help with it
Are you referring to test mode in the pack board, or in the wand board? There are two different boards, one in each. There is a jumper on the printed circuit board in the wand, it says TEST. It needs to be set to open, in other words don't have anything connected to it.
If it's the board in the proton pack itself, there is a jumper on the board which says TEST. Make sure that the jumper is not covering both pins. If it is will be stuck in test mode.
Yes it is in the wand
hello I see that you have the same electronic kit as me I plugged them in last week and then I walked with the lights and the sound bug and the indicator light on the sound card is blinking can you help me please
Unfortunately, I'm having difficulty understanding your issue. Maybe posting a TH-cam video of your issue would help?
Yeah I would love to see the inside of that proton wand. That's the biggest thing I am wondering about that might give me problems with mods.
Hello, thanks for watching! I’ll try and get the wand apart in the next few weeks and film the insides of how I modded it with the kit.
@@superactionguy6000 okay cool, that would be awesome!
Where did you get the alice pack frame thx?
Bought it on eBay... see link: www.ebay.com/sch/sis.html?_nkw=Rothco+ALICE+Pack+Aluminum+Frame+With+Attachments+20%22+-+Fits+GI+LC-1+Packs&_id=202637137676&&_trksid=p2057872.m2749.l46251
I would love to see you take the wand apart because I'm going to mode a spirit Halloween proton pack
Hi, and thanks for watching. I’ll try and get the wand apart in the next few weeks and then film how I modded it.
I have that kit in a box , had it for 3 months and haven't got the guts to install it in my pack lol
Give it a shot! If you follow his PDF instructions and you're somewhat handy it's a lot of fun!
How much money were the mods?
Hello, it's been a little while since I bought mine but I would say about $220 for all the mods.
I came to see how to upgrade the wand 😢still a great video
He can’t turn off this colorful mode
Try this for the instructions: www.ghostlab42.com/img/Spirit_Wand/SpiritWandLights_v1p0.pdf
We fixed the lights and everything but now trigger doesn’t work
@@suzyorosco2642 Which trigger are you referring to? The Activation button? That needs to be hooked up the board in the wand. Also make sure you didn't pinch the wires when you installed it or damaged the wiring there, it's a really tight fit that requires some holes and filing.
@@superactionguy6000 the firing trigger was working on the wand and turning the sound on but now the sound or trigger doesn't work. Is it possible that the speaker shorted out.
Great vid.
But you sound like woody Harrison ..
You mean Woody Harrelson? I probably look like him now too...
Lol