Thank you 1A Auto for this vid. Using it, I accessed my window regulator and at another time, replaced my door check without removing the top cables. I put a box under it to hold it up, unscrewed the door check from the door jam, then removed the speaker and used that hole to remove and replace the door check.
Help. Exhausted searching for written and video solutions and still haven't found anything. The rod fell off the door handle. I can't open the door from the inside of outside. 2004 Pacifica driver door. How do you take the panel off with the door closed? Or how do you get a hold of the loose cable to pull it to open the door?
Thanks for watching. Since this regulator is cable driver, you can cut the cable. The only down side is then you will need to replace the regulator and not just the motor. Once you cut the cable it will relieve all tension and allow the window to up and down by hand. www.1aauto.com/1A/WindowRegulators/Chrysler/Pacifica/1AWRG01480?TH-cam&VideoReply&ATony 1aauto.com 888-844-3393
Great job Mike! Thanks to your video, installation went very smoothly! Going to 1AAuto to order some additional parts. What about doing one for a reset of the Bluetooth rear view mirror?
From the point that you remove the plastic liner under the door panel. How hard is it to replace the diver side exterior door handle. Some assholes tried to steal my car and broke driver handle before I could came out to stop them.
+PABLORL1989 We currently do not have an auto repair video on this particular repair. You may be able to access the screws or bolts from inside the door. We do carry replacement door handles for your car here is a link to the 2004 - 2008 Chrysler Specifica door handles. Here is a link to them. www.1aauto.com/2004-chrysler-pacifica-exterior-door-handles/y-mo-c/2004-1026-15?TH-cam&CTA%20Comment&
1A Auto Parts really do appreciate the feedback. They pulled my handle to the point where it broke. The key button remained in tact its just the handle that broke. Wish i could poat a picture of damage so I know what to purchase. I dont know if its only the handle or if their is more inside the door as a kit that needs to go in..
This video disappointed me. I specifically wanted to know how to replace the drivers side door window regulator. This video show replacing the regulator and motor together assuming that they are both bad. Not in my case. It also does not show a wire (green) that needed to be unplugged because it was threaded in and out of the sound barrier. There were a couple other smaller things not mentioned that would have been helpful to someone that had never done anything like this before, after all it is a how to video.
Other than the motor, what else do you want to know? I just completed this job today and it only took about an hour to do the whole thing. As for the motor, there are some machine screws holding it to the bracket on the regulator - should be pretty straight forward. Remove the motor with the entire assembly out of the door. But personally I wouldn't bother. Just because one or the other hasn't not failed yet does not mean it won't; if one fails, the other is likely to fail soon, so it is wise to simply replace both and it is not cost prohibitive to do so.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Started a side skill with the help of 1a auto. Parts are quality as well.
Very thorough video this actually does go through step by step instructions and made though easier for me personally.! Excellent job guys.!
Thank you 1A Auto for this vid. Using it, I accessed my window regulator and at another time, replaced my door check without removing the top cables. I put a box under it to hold it up, unscrewed the door check from the door jam, then removed the speaker and used that hole to remove and replace the door check.
+mister smith Congratulations on the successful repair. We're glad the video helped you out. 1aauto.com 866-403-3393
I do custom work for stereos, video helped me to not have to take off the door panel to find out what was behind it, thanks for the video! Lol!
Performed this exact repair with the part from 1AAuto. Worked perfectly and was very straightforward to do thanks to this video.
Very Very helpful and informative. Tank You!!
This video was great! I watched it first, ordered the part from !A Auto (great price) installed as instructed. Thanks guys
WATCH.DO.SAVE...lol Thank you for your order! Have a great day 1aauto.com
Just did this! I tell you this video will save you $300.
Thanks a lot I just used this !
Help. Exhausted searching for written and video solutions and still haven't found anything. The rod fell off the door handle. I can't open the door from the inside of outside. 2004 Pacifica driver door. How do you take the panel off with the door closed? Or how do you get a hold of the loose cable to pull it to open the door?
What if the window is down and won't go up ???
Thanks for watching. Since this regulator is cable driver, you can cut the cable. The only down side is then you will need to replace the regulator and not just the motor. Once you cut the cable it will relieve all tension and allow the window to up and down by hand.
www.1aauto.com/1A/WindowRegulators/Chrysler/Pacifica/1AWRG01480?TH-cam&VideoReply&ATony
1aauto.com 888-844-3393
Great job Mike! Thanks to your video, installation went very smoothly! Going to 1AAuto to order some additional parts. What about doing one for a reset of the Bluetooth rear view mirror?
This is in the Chevy Silverado 2000-2006 playlist
Does this regulator also have the motor on it?
From the point that you remove the plastic liner under the door panel. How hard is it to replace the diver side exterior door handle. Some assholes tried to steal my car and broke driver handle before I could came out to stop them.
+PABLORL1989 We currently do not have an auto repair video on this particular repair. You may be able to access the screws or bolts from inside the door. We do carry replacement door handles for your car here is a link to the 2004 - 2008 Chrysler Specifica door handles. Here is a link to them. www.1aauto.com/2004-chrysler-pacifica-exterior-door-handles/y-mo-c/2004-1026-15?TH-cam&CTA%20Comment&
1A Auto Parts really do appreciate the feedback. They pulled my handle to the point where it broke. The key button remained in tact its just the handle that broke. Wish i could poat a picture of damage so I know what to purchase. I dont know if its only the handle or if their is more inside the door as a kit that needs to go in..
1A Auto Parts i was able to get outside driver door handle replaced. Alot easier than I anticipated hahaha. Thanks again sir. 1AAuto for the win
Do one replacing a window
My Pacifica has a Bosch motor on it and this 2 prong plug doesn't fit
+Marty Ulrich Thanks for the tip!
This video disappointed me. I specifically wanted to know how to replace the drivers side door window regulator. This video show replacing the regulator and motor together assuming that they are both bad. Not in my case. It also does not show a wire (green) that needed to be unplugged because it was threaded in and out of the sound barrier. There were a couple other smaller things not mentioned that would have been helpful to someone that had never done anything like this before, after all it is a how to video.
Other than the motor, what else do you want to know? I just completed this job today and it only took about an hour to do the whole thing. As for the motor, there are some machine screws holding it to the bracket on the regulator - should be pretty straight forward. Remove the motor with the entire assembly out of the door. But personally I wouldn't bother. Just because one or the other hasn't not failed yet does not mean it won't; if one fails, the other is likely to fail soon, so it is wise to simply replace both and it is not cost prohibitive to do so.
Thanks!
+Jon Villasanta Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c