How to Replace CV Axle Shaft 2005-2010 Chevrolet Cobalt
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ib/1AAX...
This video shows you how to install a CV axle shaft on your 2005-2010 Chevrolet Cobalt. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2005 Chevrolet Cobalt
2006 Chevrolet Cobalt
2007 Chevrolet Cobalt
2008 Chevrolet Cobalt
2009 Chevrolet Cobalt
2010 Chevrolet Cobalt
Tools you will need:
• Pry Bar 1aau.to/ocv/1AX...
• 14mm Socket 1aau.to/ojN/1AX...
• 15mm Socket 1aau.to/ojN/1AX...
• 18mm Socket 1aau.to/oei/1AX...
• 19mm Socket 1aau.to/oei/1AX...
• 30mm Socket
• Brake Caliper Hanger 1aau.to/oJ/1AXA...
• 1/2 Inch Air Impact Gun 1aau.to/oau/1AX...
• Air Chisel 1aau.to/oj/1AXA...
• Ratchet 1aau.to/okN/1AX...
• Socket Extensions 1aau.to/ojN/1AX...
• Torque Wrench 1aau.to/ogc/1AX...
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oa9/1AX...
• Copper Anti-Seize
• Rust Penetrant
• Center Punch 1aau.to/o6/1AXA...
• Hammer 1aau.to/ocw/1AX...
• Magnet - Extendable
• Wire Brush 1aau.to/oaE/1AX...
Subscribe: / @trq
Check out our playlist:
Chevy Cobalt 2005-2010 1st Generation: • Chevy Cobalt 2005-2010...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thank you for the video, Sir! It's been 10 years since I've had to change a CV joint, but I have to do so now. I came across your video on the Google machine, and now I have 100% confidence to do the job. 1,001 Thank You's to you, Sir!
How did it magically get a new wheel hub bearing assembly?
Wow, incredibly thorough, paced, but easy to follow / learn. I will definitely be back to watch more vids from this guy.
Dauphin, mb
+Terrence W. Funk Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Thank you carnal, I did that job watching your video, thank you very much, greetings from here in Pennsylvania!!
well done sir. thanks
What’s the name of the female connection into the transmission, and how is the best way to remove it
What is the name of the short shaft that goes into the transmission before the cv axle?
do you drive through acid everyday?
Superb super easy one of its kind video
Not being picky but the next tech is going to get screwed with all the red loctite..
Hes going to have to heat the caliper bolts, strut bolts and axle nut.
Otherwise job well done.
Good info. I will say though that car is deeply rusted.. I wouldn’t trust the struts or tie rods 😬
Do you guys know if this pair of axles works for a 05 2.0 s/c chevrolet cobalt?
Really kinda agonizing to see a wire brush, even if its copper, brushing onto the brake caliper piston boot/seal like that. Lol
Great job! I am working on a 2016 cobalt today, front shaft, also one of the front passenger side caliper is getting hurt, will need to check it out, oil change, and some bushings.
No such thing as a 2016 cobalt.
🇲🇦🇲🇦👍🇲🇦🇲🇦