PT Cruiser Watts link replacement

In this video, I show how to replace the 3 parts of the Watts link (track bar) rear axle system.

[@hycomat8041]

Thank you, mister. Very good! Thanks from Slovakia.

[@robguysgarage5422]

Thanks for watching from so far away!

[@hayfork100]

Very clear explanation of how to do the whole job. My 2002 Limited has 90,000, so I will need this pretty soon.

[@robguysgarage5422]

Thanks, and thanks for watching

[@sonny323]

​@@robguysgarage5422
I got a 2005 pt cruiser need this fixed whats the part number if remember

[@chrisking9960]

A very good video, thank you. One thing that could be of interest is that I did this job on my 2001 pt as per the video. On the earlier pt's the deep socket required for the long bolt on the Watts linkage is 21 mm not 24mm as in the later pt's, this could be useful info for older model replacements.🙂

[@robguysgarage5422]

Thanks for the info!

[@imrejanosszabszauszauter9894]

Köszönöm,hogy megnézhettem a videódat.Sokat segítettél nekem.Mégegyszer köszi.

[@robguysgarage5422]

Thanks for watching

[@JeepsOnTheRun]

I'll be honest - never knew the term "Watts link". Nice video !

[@robguysgarage5422]

Thanks!

[@guyaldrich5878]

Thank you for the video , I will be using it to guide me on this job in the near future on my 2007 pt cruiser !

[@robguysgarage5422]

awesome, glad it helped

[@N3KFAC3]

1:51 couldn't agree more thats how i feel working on mine😂

[@robguysgarage5422]

yup😀

[@FuZ82]

Thx for video, now it will be much easier job on my 2006 Route 66 👍

[@robguysgarage5422]

Glad it helped, thanks for watching

[@MichaelBrown-um8qc]

Perfect video! Thank You for sharing 🥂👍. 🎄Happy Holidays🎄🥂☃️

[@robguysgarage5422]

Thank you! You too!

[@maxportrey907]

Very helpful. MIne needs new Watts kinkage. Anything out there on rear sway rep[lacement, esapecially bolt specs? Got the sway bar. No Bolts.

[@robguysgarage5422]

I never did the sway bar bushings, I don't see any specs for a rear sway bar but the front to bracket is 18 ft lbs, sway bar to control arm is 22 ft lbs

[@cash5627]

Good video. Say, should I also put anti seize on the tie rod end the connects to the watts link / bell crank in the middle?

[@robguysgarage5422]

I did, so it would be easier to take apart next time, thanks for watching