RO faucet sputters water/tank not filling - Common Causes
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- Reverse Osmosis system Playlist
• How To Re-Pressurize R...
1. Replace RO system Flow Restrictor
• Replace GE reverse osm...
2. How to Purge RO system
• How to Sanitze & Purge...
3. How to re-pressurize RO storage tank
• How To Re-Pressurize R...
4. Replace RO faucet battery
• How to replace RO fauc...
Reverse Osmosis system Playlist
th-cam.com/video/mjg-nGxpBM8/w-d-xo.html
1. Replace RO system Flow Restrictor
th-cam.com/video/RCxchnUQ5ps/w-d-xo.html
2. How to Purge RO system
th-cam.com/video/cHSnbGE3G6w/w-d-xo.html
3. How to re-pressurize RO storage tank
th-cam.com/video/mjg-nGxpBM8/w-d-xo.html
4. Replace RO faucet battery
th-cam.com/video/Ylgcgvys000/w-d-xo.html
Great vid. wish all u-tubers were clear, fast and succinct like you
We really appreciate that, & thank you for watching. Let us know if you have any questions. 👍
My fix was to relieve the tank. The psi was up to 30. Reduced it down to 8-10 psi and now water flows great
Thanks for watching, 30 psi is high indeed. Great job making it a DIY project and releasing psi from tank down to 8-10. 😎👍
Hey also if you’re into crypto trading, join our newly launched DIY community ecosystem.
Toolboxtoken.com
We DIYers need to stick together! 🧰
How did you go about releasing the pressure?
Thank you, very helpful
I have a new tank new filters new tubing and the reverse osmosis tank ball valve is in the open position (it also has zero water in it) but nothing is working, I have zero water to the reverse osmosis system and zero water flowing to the tank and I don’t understand what’s wrong ….. any help would be appreciated.
Thanks for watching, any update? While the system was empty during the filter change, did you verify that the tank had the proper pressure?
In our case, our tank requires 7psi while completely empty. If your tank psi is lower than the manufacturer’s recommended amount, the tank will have a hard time pushing water out of it and up to faucet.
On the opposite end, if your tank has too much psi, it will overpower the system and not allow water to enter tank.
Below is a link to our Reverse Osmosis system PlayList that contains several helpful videos.
th-cam.com/play/PLjCXOz8TSkZlQnBuZZrgOiwjkvAkXc_Ov.html&si=xXCNQNVvTwZYT6a-
👍
too much talking without actually showing how to do it
Of the warer pressure ia low i the home would this be a potential reason.
😂😂
It has been years since we usued our reverse osmosis system. I have just replaced my pre/post filters and adjusted the pressure in the tank (it was zero when I first checked and the tank was empty). I also JUST replaced the membrane, disconnected the line from the tank and held it in the sink. With water running to the system, water barely trickles through the line intended for the tank. I took apart the whole system, wiped down what I assume is the auto shutoff valve components and still no more than a trickle through the tank line. I noticed a rubber disc under the auto shut off rings that looked slightly deformed (as if a portion of the center was raised from being pinched). Could that be my issue??
Thanks for watching & welcome to the DIY Raptor Club. That is your internal auto shutoff diagram. Below is a link to a video that talks more about that.
th-cam.com/video/hj1volAUeR8/w-d-xo.html
On average, it takes 4-6 hours for an RO system to fully pressurize which in return will give you better outflow water pressure.
In addition, below is a link to our RO system Playlist containing several helpful videos.
th-cam.com/play/PLjCXOz8TSkZlQnBuZZrgOiwjkvAkXc_Ov.html
😎👍
@@DIYwithMichaelBorders Thank you! I think I was being impatient because I don't hear the water draining anymore and the tanknis much heavier.
@@shawnhilliard
So happy to help, looking forward to hearing back from you. 👍
@@shawnhilliard did you sorted by any chance? Have the same issue..
Hii I replaced filters new tank
And still nothing
Thanks for watching & welcome to the DIY Raptor Club. By chance, was the new filters exposed to temperatures below 40f at any point?
The reason we ask is because this happened to us and after many troubleshooting steps, we realized that it was faulty filters from the get-go due to having them in freezing cold weather before bringing package inside and unboxing it.
I added air pressure to tank because of weak flow per instructional videos but now my tank will not fill up. Weirdly- I can feel the source line from the needle valve flowing water ONLY when i use the kitchen faucet. I am about to check my filters but it doesn’t make sense for this behavior to be caused by dirty filters or does it? Thnx
Thanks for watching & welcome to the DIY Raptor Club. At this point, your tank may have more pressure than the system which will not allow water to be pushed into take.
In other words, the tank is over powering the water that’s trying to get in. Its continuing to push water away from the tank.
@@DIYwithMichaelBorders but water does fill into the filtration system only once i use the kitchen sink. Like I will wash my hands in the sink and water will start to flow but as soon as i am done washing my hands water flow to filtration stops. Ill double check the pressure again, I just saw the video on standing water in the tank thanks
@@jlg8689
Thanks for the reply, looking forward to hearing back from you.
How would the tank gain psi? Doesn’t seem possible
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
Great question and it’s very uncommon to gain psi over a short time frame. It can gain or lose 1-2 psi over a course of 6 months to a year.
Psi changes occur due to temperature changes and outside atmospheric pressure. Your house will experience the same throughout the year as temperatures change. A random door might close perfectly during December however that same door might begin to rub on the frame during July as it closes.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
@@DIYwithMichaelBorders thanks for the reply, figured the problem out. It was the expanding sponge that lifts the shut off the refill. Must have gotten some moisture down there.
@@bonefiedrealdeal3640
Very cool, and we appreciate you sharing your update. 😎👍
Hello i just intalled the filters and the tank does not fill up. When I open the faucet it has almost 1.5 liters and than the water stops. After half an hour or so I can get again the same amount but never more. The company that installed the filters says that it will work but its been three days and the tank is still empty. Do you have any idea why this happens?
Thanks for watching and sharing this, by chance did the filters come in contact with very cold weather while in your possession?
Check out the video link below, it shows what happened to us.
th-cam.com/video/do9g4oyHlN4/w-d-xo.html
😎👍
@@DIYwithMichaelBorders I don't think thats the case because it has been pretty mild eventhough is winter time. To give you a better understandig I have to mention that we are two houses that use the same water system and pump...they(the other family) also have set a RO faucet and their tank is also not filling. May the pump preassure or the system itself have any impact on the tank not filling. P.s. Thank you so much for trying to help mee ❤️!
@@etomlinson2400
Thanks for watching and that’s valuable info. Has there been any recent significant work done to plumbing that would alter the performance of the homes?
@@DIYwithMichaelBorders We've also have intalled a central filtration system at the main water tank( for nondrinking water) and also put a counter valve at the pump
@@etomlinson2400
Thanks for the follow up, if system wasn’t installed 100% properly up to code, it might be causing the lack of performance with pressure.
Since it’s affecting both homes, the cause is very likely tied to something deeply rooted to the main pump and valves.
What if water comes out of the schaeder valve?
Good morning ☕️
Are you referring to the Air-gap port on base of faucet? If so, that’s an indication that your black drain line is clogged.
Carefully disconnecting the black drain line from the lower fitting where it feeds into your plumbing, followed by carefully unclogging line and re-securing it to fitting will hopefully solve issue.
@@DIYwithMichaelBorders no. Thank for the advice but I was referring to water coming out of the Schraeder valve on the tank when trying to add air to increase the pressure of the tank. It means the tank is bad and that the bladder has ruptured.
@@twinkletoes3051
Thanks for the follow up. Unfortunately, that’s not good. How old is tank? If water is leaking from that fitting, it means that the internal bladder has ruptured and is now allowing water into lower air compartment…and allowing it to leak out of valve.
It might be time for a new tank. If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
amzn.to/481eJ4A
👍🧰
I put 3,5 bar to mine and it not flow water to the tank,do I need more pressure to my tank?
Thanks for watching & welcome to the DIY Raptor Club. Do you have this exact system? If so, we recommend having between 5-7 psi in tank when completely empty.
With a different system, we recommend referring to your owners manual for the proper psi for tank.
Keep us posted. 😎👍
@@DIYwithMichaelBorders I already did that and the tank does received water
@@papagalos007
Awesome Awesome. 😎👍
@@DIYwithMichaelBorders do you know why tank is not filling water?any opinion will help
@@papagalos007
Thanks for the reply, have you replaced the filters and membrane recently? Old filters or old membrane will cause these symptoms.
Well my problem was my new RO filter wasnt turned all the way in 😂
@@amandafernandez5126
Thanks for watching, that’s awesome you pinpointed the cause. Cheers to a successful DIY project! 🧰
My filters are not the issue
Thanks for watching, any update? Did you find the cause? Let us know if you have any questions. 👍🧰
Why not do what you say? why keep talking without a demo?
Thanks for watching and sharing your thoughts. Any and all helpful feedback is greatly appreciated.
Let us know if you have any questions and hey if you’re into crypto trading, check out our newly launched DIY ecosystem.
Toolboxtoken.com
Reach out to us any time! 🧰
3:58
Thanks for watching. Let us know if you need anything questions answered.