Tengo un Ford Focus RS 2017 y me gustaria comprar este kit de capot! Donde puedo encontrar este kit con los amortiguadores cortos es fantastico! Muchas gracias!🤗
Thanks for posting....the last part you didn't film I assume was a two person job.....to lift the bonnet high enough while someone could locate the ends of the struts and secure the cir-clips ?
roggt1000 Hi, I did or should I say i started to film the end but it is quite hard to push the ends on as the struts are about an 1" long and hard to push up that 1" and fit, I did do it on my own but took to long so I stopped filming
Hi, Sorry, you can get them from here www.nbstyling.co.uk/store/?pID=91 or www.teamtorquesteer.co.uk/mk3-focus-rs-underbonnet-styling/mk3-focus-bonnet-lifterstruts-kit-all-models-including-strs.html
Hi . We make this kit . Liking your video its very informative. Yes there are a couple of tricky bits but overall it is pretty straight forward. We do have online instructions on our Facebook page. It can be fitted by yourself as you have done but as with anything 2 people makes it easier. The scariest part is pushing the bonnet up as high as it will go to connect the strut to the wing bracket. I think owners are always more gentle but having fitted loads of these i find a quick shove upwards with simulatanous pushing the strut end onto the wing bracket normally has it on in seconds. Dont try to compress the strut..you wont! Any problems please contact NB Styling on our Facebook page.
NB STyling Hi, This is a great kit as there is no cutting of any of the plastic,and as you said it's all about how far you push the bonnet up, one thing I would ask is why not use a Nut on the ball pin on the bottom bracket instead so to make it easier than pushing the fixed Nut though the plastic
We trialled the wing bracket with just a hole with a stud and nut but found it would bend as the force was over a small area. With the rivnut installed it is much stronger and doesnt bend
Hi,Good answer , I work in a sheet metal department and have done for 23 year, i did look at the brackets and was going to replace them with 2mm stainless ones and shine them up but just didn't get around to it
NB STyling hi do you guys ship this kit to the US or have an American distributor? This kit is exactly what I'm looking for and doesn't seem as cheap or hacked as some of the other competing kits. Thanks!
I've had this kit laying around for 2 yrs now. Time to finally install. Thanks for the video!
Tengo un Ford Focus RS 2017 y me gustaria comprar este kit de capot! Donde puedo encontrar este kit con los amortiguadores cortos es fantastico! Muchas gracias!🤗
Hi, i'm tring to install this strut but at the last point, can't push hood up. How did you do that? ?
I am amazed that they are not standard as on the Golf R MK7.
Cost saving I guess in the days of getting below £30 k UK
Thanks for posting....the last part you didn't film I assume was a two person job.....to lift the bonnet high enough while someone could locate the ends of the struts and secure the cir-clips ?
roggt1000 Hi, I did or should I say i started to film the end but it is quite hard to push the ends on as the struts are about an 1" long and hard to push up that 1" and fit, I did do it on my own but took to long so I stopped filming
who makes the strut, please provide the link as well??
Hi, Sorry, you can get them from here www.nbstyling.co.uk/store/?pID=91 or www.teamtorquesteer.co.uk/mk3-focus-rs-underbonnet-styling/mk3-focus-bonnet-lifterstruts-kit-all-models-including-strs.html
Thank You!!!!!!
How much BHP did this add? Thanks
Luke Basi About 10 -15
Hi . We make this kit . Liking your video its very informative. Yes there are a couple of tricky bits but overall it is pretty straight forward. We do have online instructions on our Facebook page. It can be fitted by yourself as you have done but as with anything 2 people makes it easier. The scariest part is pushing the bonnet up as high as it will go to connect the strut to the wing bracket. I think owners are always more gentle but having fitted loads of these i find a quick shove upwards with simulatanous pushing the strut end onto the wing bracket normally has it on in seconds. Dont try to compress the strut..you wont!
Any problems please contact NB Styling on our Facebook page.
NB STyling Hi, This is a great kit as there is no cutting of any of the plastic,and as you said it's all about how far you push the bonnet up, one thing I would ask is why not use a Nut on the ball pin on the bottom bracket instead so to make it easier than pushing the fixed Nut though the plastic
We trialled the wing bracket with just a hole with a stud and nut but found it would bend as the force was over a small area. With the rivnut installed it is much stronger and doesnt bend
Hi,Good answer , I work in a sheet metal department and have done for 23 year, i did look at the brackets and was going to replace them with 2mm stainless ones and shine them up but just didn't get around to it
NB STyling hi do you guys ship this kit to the US or have an American distributor? This kit is exactly what I'm looking for and doesn't seem as cheap or hacked as some of the other competing kits. Thanks!
RS Focus 435 Great install video. You have sold me on this item. Thanks for the helpful content!
Screw the RS I'm riding a horse to town.