Launch Creador Elite GM Scan-Tool Review
ฝัง
- เผยแพร่เมื่อ 22 ก.ค. 2024
- Quick review on the new 2022 Launch Creader Elite bidirectional scan-tool for GM vehicles. Kingbolen sent me this scan tool for free in exchange for my honest opinion and review. This is hands down one of the best scan-tools you can buy for under $200. This scan-tool lets you have dealership controls and functions at your fingertips. Scan-tool was purchased from Amazon and I have listed a link to it below.
Launch Creader Elite GM Scan-tool: amzn.to/3KiH37s - แนวปฏิบัติและการใช้ชีวิต
Great review of the Creader. I've been on the fence about it for some obscure problems with an obscure GM vehicle.
Great review! I've been considering ordering one of these and this information will help me to make my decision. Thanks for posting this. 👍👍👍👍
Great review! Thank you for sharing all this info.
Nice review bud . Thanks 👍
I wonder if it could command evap stuff on the GM cars?
Do you know if I can reset alcohol fuel content with this on a 2011 silverado. Ilmy truck is saying I have 49% alcohol in it but I regularly put e15 in it.
Anyone able to register a battery with this scan tool? I can't seem to find it
Can you reset alcohol content?
i have a 2018 l5p duramax. will it do a glow plug module relearn? does it do regens on dpf'?
How do you clear the engine light that's only thing I wanted to know
Great video sir. Curiosity question. Do you know if this tool is capable of activating the remote start function of a vehicle? I paid a couple hundred bucks a few years ago to have the remote start feature of my pickup activated. Seems like modern scanner tools like this are getting more and more capable.
*update* - got this tool and also a slightly cheaper one from CGSULIT. Both tools worked great and could get into all the specific functions on my C7 Corvette. I was able to relearn my new exhaust actuators in a few clicks. *end update*
Great video. Looking at a few bi-directional tools for my 2016 Corvette. I'm assuming this is showing only relevant stuff for your truck, or does it *only* have the specific functions for any GM vehicle, such as those shown under the Body Control Module.
I need to get into the Chassis Control Module and do an Exhaust Flow Valve Relearn (replaced a bad actuator on the exhaust pipe). Only a few cars have exhaust valves that open and close, so it's hard to search for a tool that you know will do it. Thanks!
Thanks for the info sorry I didn’t get back to you sooner. Glad it worked for you.
i have a 2018 chevy volt< do you think this will work for dealership isues,
Yes it will work for the Chevy Volt
Can this do fuel trim reset and fuel composition reset?
Yes
Hello very good, very good your video is exactly what I was looking for for myself. I have a request if possible! Could you make a video on how to fully inspect and code or reset the automatic transmission to drive mode yourself? that is to say reset and adjust it to my condition mode! greetings and very good your video. Thank you
I will see what I can do. Thanks
@@BLUECOLLARGARAGE 👍
Does this scanner do throttle relearn and ABS Brake bleeding? Just wondering. Thanks
You have to purchase brake bleeding
I did abs brake bleed on it it worked!
I was just looking at this in Amazon and found this statement: " Please do not purchase any special features in the Mall . "
Did you try to buy any of the other modules?
No I haven’t had to buy anything from the mall yet.
Does it work for dpf forced regeneration?
Unfortunately it does not.
Does it come with crankshaft relearn ?
Yes it does
I have a 2017 silverado displaying a "service 4 wheel drive " message. Do you know if this scanner will troubleshoot it?
Is your check engine light on?
@@BLUECOLLARGARAGE No. It did flash on me a few months ago but has not done it since.
@@cousinles80 I’m pretty sure this tool will work for your truck but I’m not 100% sure. I’m assuming your 2017 silverado has the automatic transfer case so it would have a tccm which is the transfer case control module so this scan tool would check for fault codes in that system.
@@BLUECOLLARGARAGE You are correct. I need a tool to read tccm fault codes.
I just ordered one on Amazon, if it does not fix my problem, I am sure I will still make use of it.
Did you test the GM 2.0 scan tool new version?
No not yet but they are sending me the new unit to test so I should have a video out soon.
@@BLUECOLLARGARAGE Lol. That's us. We sent the MG to you for testing the GM scanner, Did you reply my team?
I just bought this for my truck it’s a 2007 Chevy Colorado and I had to put a new ecm and it said on Amazon that I had crankshaft relearn will it work for
It
Were you able to relearn your cps?
@@dariusconyers1 no the thing was kinda Garbo I bought a CS530 instead and it worked
Thanks cause I tried yesterday and it’s not taking it smh
@@dariusconyers1 yea it’s not a great tool the new one is super nice
I just did it I wasn’t holding the break nor putting the emergency break on
Can it work on 2020 ram 1500
No this one is specific to GM models.