Thank you so much for showing how to fix a Miele jammed brush head. It saved me £72 for a replacement. I only had to remove the inspection cover to free the brush - all caused by a sliver of broken glass which fell out.
Thank you for this excellent video. I was able to take this apart and thoroughly clean it on the basis of your instruction. It's true the centering is occasionally off, so that one can't see parts of what you are doing, but this was still very inspiring!
Thank you sir, I was about to throw away mine, but found your instructional video - worked perfectly. I would have been in trouble - but watched a few parts over a number of times - and it now works as well as new. For me there were strands of cotton and hair wrapped around the sweeping bar at the ends.
THANK YOU!!!! The tip about the extra screws below the wheels and that the wheels snap out was the key. After that, it was a pain getting the clear plastic part to separate from the bottom because of the barbed snap-in features. After I got it apart, I knocked the edges off those barbs with a Dremel tool to make it easier to get apart next time. It's beyond me why they design it such that is is so hard to disassemble.
Thanks for this video, it helped me pull the thing apart when I got coat thread wound around the axle. I didn't know there were screws under the wheels. :P When I put it back together, I couldn't see in the video how the triangular piece fit back in because of the camera angle but I figured it out.
No worries Catalin I've redone this after the head blocked "again" it's at th-cam.com/video/IvjXeDMREmE/w-d-xo.html it may rate slightly better than Good ish LOL
Thank you so much!! I really needed this thing that cost way to many for my taste to buy new and with nobody to help I needed to figure this out alone. I couldn't have done is without your video!!
Aaahhhh ... this would be fantastic but I can't see what you're doing in the important parts! The camera didn't show your hands and the parts when you were putting the pieces back together. I now have all my parts but I can't see how to put some of them back together. When I prised the thing open, pieces just flew everywhere so I don't know where some of them fit together.
you all prolly dont care at all but does someone know a tool to get back into an Instagram account..? I somehow lost my password. I love any help you can give me
@Axel Amir I really appreciate your reply. I found the site thru google and I'm waiting for the hacking stuff now. Takes quite some time so I will get back to you later with my results.
Brilliant video! The only thing I needed a bit more help with opening the belt area, but I figured it out. I absolutely needed this, so thank you so much for taking the time to make and post.
Thanks for the video. I would have never guess the 4 screws hidden behind the 4 wheels! Was a bit reluctant to pull the top off as I feared it will break something but followed your steps. Much appreciated 😊
I am a domestic cleaner by trade and have one of these heads. I usually just cut the hair out of it using scissors but decided to pull apart today and more hair and dust definitely came out from parts you cannot get to otherwise. I was not however, able to pull it completely apart where the clear plastic clips are, they are stuck fast !! put back together and now the brush isnt working properly
Thanks for the video. I wonder if you have a site you can recommend for parts? The roller brush bracket (ref 5:33) has broken and I can't find one for love nor money...
hope this helps there is one on www.miele.co.uk/e/rx2-roller-brush-rx2-bw-10592110-p?gclid=Cj0KCQiA2-2eBhClARIsAGLQ2RkHkOk7J5BJdCXim_KBZ8mE2FFGTaeXagzir-M6Rbbwdv5GC3uguh8aAn2KEALw_wcB
Exactly, I have long hair, so as my daughter. I need to clean it every third time use. Mielen couldn't make it more difficult to clean it. I don't understand why they couldn't thought how to make it easier to clean it
@@SimplyFitLondonAlbinaSafarova I ended up getting the SBD 285-3. The "hair agitator" isn't as wide, but it'll do the job better than this spinning hair collector. I do not have a powered handle.
Too bad the belt and brush cannot separate. In fact, too bad this head has clearly been designed not to be disassembled or deep cleaned. My Dyson cordless brush just slipped straight out for easy cleaning, but the suction is way lower. Maybe someone should invent a dyson/miele head adapter!
Thank you so much for showing how to fix a Miele jammed brush head. It saved me £72 for a replacement. I only had to remove the inspection cover to free the brush - all caused by a sliver of broken glass which fell out.
Fantastic Ann, glad to be of service
Thank you for this excellent video. I was able to take this apart and thoroughly clean it on the basis of your instruction. It's true the centering is occasionally off, so that one can't see parts of what you are doing, but this was still very inspiring!
Thank you sir, I was about to throw away mine, but found your instructional video - worked perfectly. I would have been in trouble - but watched a few parts over a number of times - and it now works as well as new. For me there were strands of cotton and hair wrapped around the sweeping bar at the ends.
no worries Iceman I've redone the video but glad it helped ta. th-cam.com/video/IvjXeDMREmE/w-d-xo.html
Perfect. I could open and clean the head of vacuum with this video. Much appreciated...
THANK YOU!!!! The tip about the extra screws below the wheels and that the wheels snap out was the key. After that, it was a pain getting the clear plastic part to separate from the bottom because of the barbed snap-in features. After I got it apart, I knocked the edges off those barbs with a Dremel tool to make it easier to get apart next time. It's beyond me why they design it such that is is so hard to disassemble.
Thank you - fantastic teardown step by step. I was able to totally clean the inside my hoover as a result.
Glad it helped!
Thanks for this video, it helped me pull the thing apart when I got coat thread wound around the axle. I didn't know there were screws under the wheels. :P When I put it back together, I couldn't see in the video how the triangular piece fit back in because of the camera angle but I figured it out.
Appreciate the feedback Marcy have now redone the vid, th-cam.com/video/IvjXeDMREmE/w-d-xo.html if you have to do it again :)
Brilliant. Thank you. Saved me a good few quid at the repair shop. Much appreciated.
enjoy the cash no doubt it was hard earned :)
Finally a good ish explained video on how to open the damn turbotec without breaking it. Cheers
No worries Catalin I've redone this after the head blocked "again" it's at th-cam.com/video/IvjXeDMREmE/w-d-xo.html it may rate slightly better than Good ish LOL
Thank you so much!! I really needed this thing that cost way to many for my taste to buy new and with nobody to help I needed to figure this out alone. I couldn't have done is without your video!!
no worries I've updated the vid if you need to do it again, which is highly likely ;)
Aaahhhh ... this would be fantastic but I can't see what you're doing in the important parts! The camera didn't show your hands and the parts when you were putting the pieces back together. I now have all my parts but I can't see how to put some of them back together. When I prised the thing open, pieces just flew everywhere so I don't know where some of them fit together.
you all prolly dont care at all but does someone know a tool to get back into an Instagram account..?
I somehow lost my password. I love any help you can give me
@Charles Salvador Instablaster :)
@Axel Amir I really appreciate your reply. I found the site thru google and I'm waiting for the hacking stuff now.
Takes quite some time so I will get back to you later with my results.
@Axel Amir It worked and I actually got access to my account again. I am so happy!
Thank you so much, you saved my account :D
@Charles Salvador no problem xD
This is only slightly helpful because the camera is aimed too low and doesn't show a lot of what you're doing.
Brilliant video! The only thing I needed a bit more help with opening the belt area, but I figured it out. I absolutely needed this, so thank you so much for taking the time to make and post.
Glad it helped the belt release was a bit fiddly sorry
Thanks for the video. I would have never guess the 4 screws hidden behind the 4 wheels! Was a bit reluctant to pull the top off as I feared it will break something but followed your steps. Much appreciated 😊
No worries Jinoh
I am a domestic cleaner by trade and have one of these heads. I usually just cut the hair out of it using scissors but decided to pull apart today and more hair and dust definitely came out from parts you cannot get to otherwise. I was not however, able to pull it completely apart where the clear plastic clips are, they are stuck fast !! put back together and now the brush isnt working properly
send over a picture or two I'll see if I can help
Ty!!! So helpful, and didn't have to buy another head!!
Glad I could help!
Nice video. What is the size of the hex head screws? I need to clean the roller brush.
not sure from memory 20
Thank you so much, I’ve tried to take it apart before and didn’t realise there were screws under the wheels.
Thanks for the video. I wonder if you have a site you can recommend for parts? The roller brush bracket (ref 5:33) has broken and I can't find one for love nor money...
www.espares.co.uk/product/es1661360?+shopping&+shopping&gclid=Cj0KCQiA2-2eBhClARIsAGLQ2RnIqWCd1fiE6dHpdB6T4tohGy6I76Rnj9mYO1qm1s-2YfDFVD432H0aAmgPEALw_wcB
hope this helps there is one on www.miele.co.uk/e/rx2-roller-brush-rx2-bw-10592110-p?gclid=Cj0KCQiA2-2eBhClARIsAGLQ2RkHkOk7J5BJdCXim_KBZ8mE2FFGTaeXagzir-M6Rbbwdv5GC3uguh8aAn2KEALw_wcB
Thank you... This helped a lot
Glad it helped Dinesh I've redone the vid after the head blocked again if you need it. thanks th-cam.com/video/IvjXeDMREmE/w-d-xo.html
Thank you for your time making this video!!
No worries Mark glad to be of help
You're fantastic! You made my husbands life so much easier, hence, mine :) cheers!
Thank you so much for this helpful video.
a pleasure
Thanks so much for this
Thanks, this helped me clean mine. Obviously designed to be awkward as possible.
designed so you buy a new motorhead
Thanks for this, it was helpful!
Glad to hear it!
Best description so far.
Thanks Tracey just redone it with slightly better description, I hope ..... th-cam.com/video/IvjXeDMREmE/w-d-xo.html
Thank you, you are fantastic!
I couldn't figure it out, I should of found your video 1,5 ago.
No worries glad it helped :)
thanks for your help I got it going
no worries Anthony just redone the video if you need it ta. th-cam.com/video/IvjXeDMREmE/w-d-xo.html
Thank you
This would be been brilliant if you could actually see half of it!
this head is unusable for longer hair. 2 seconds of spinning and it's clogged.
Exactly, I have long hair, so as my daughter. I need to clean it every third time use. Mielen couldn't make it more difficult to clean it. I don't understand why they couldn't thought how to make it easier to clean it
@@SimplyFitLondonAlbinaSafarova I ended up getting the SBD 285-3. The "hair agitator" isn't as wide, but it'll do the job better than this spinning hair collector. I do not have a powered handle.
@@nebulousJames12345 thank-you, so is it fit to this hoover? Pls
Thank you, had to get help with prising it all apart but it did the trick!
no worries just done the vid again if you need it ta th-cam.com/video/IvjXeDMREmE/w-d-xo.html
did you watch this before you posted? cant see anything lmao
Binned already. This head is worse than those of cheaper brands
You're hiding what you're doing!! Surely you should've had the camera at the right angle. Frustrating!
Sorry Liz have redone the video albeit a bit late :( th-cam.com/video/IvjXeDMREmE/w-d-xo.html
Too bad the belt and brush cannot separate. In fact, too bad this head has clearly been designed not to be disassembled or deep cleaned. My Dyson cordless brush just slipped straight out for easy cleaning, but the suction is way lower. Maybe someone should invent a dyson/miele head adapter!
Updated video here shows belt disconnect hope it helps, better late than never? th-cam.com/video/IvjXeDMREmE/w-d-xo.html
I CANT SEE ANYTHING
You just made my so angry 90% of video is just impossible to see what are you doing 🤷♀️
Sorry about that I've redone the video now hopefully I won't have annoyed you twice :( th-cam.com/video/IvjXeDMREmE/w-d-xo.html
Thank you