Very nice interior setup Nate. Clean and professional looking. Boat runs great. Nice to see others Moebius Skipjacks. Nice production on the video as well. See you in Dive Tribe.
Excellent presentation. Maybe you could answer the query posted in the Drydock forum regarding the sailplane control rod "what must be done to get the magnet equipped servo pushrod and the long planes hull pushrod to mate up and have the FW planes at zero degrees? I have nice, floppy, uppy-downy planes and a long pushrod held in place with split heat shrink tube segments in the upper hull. Length adjustment is needed, as well as alignment for mating the two hull halves with working FW planes so that the two pushrods click together "
Hi Nate, if you reduce the size of the snorkel tube you would probably be able to ballast her with negative buoyancy if I am not mistaking. My Skipjack has a snorkel and a horizontal plate the limits the amount of ballast water. (R&R system). Nice clean setup of your boat and WTC by the way 👍
Thanks Robbert! I did consider reducing the snorkel vent hole but the pond is really shallow where I run, so I still prefer ballasting her positively and running at periscope depth. Might consider something similar to R&R on the next boat!
Can you do a step by step guide on making a scale Uboat in to an operational model. I know you have touched on this, but for a beginner I would really be interested in such a project. Also where to purchase the parts and what is needed. Thank you for your patience.❤
Great build all around, nice and clean installation on the WTC. 👍
Very nice interior setup Nate. Clean and professional looking. Boat runs great. Nice to see others Moebius Skipjacks. Nice production on the video as well. See you in Dive Tribe.
Thanks! I was part of the Dive Tribe in 2022, but it was always tricky attending meetings from my time zone.
fabulous model and video!
Well done. I was lead man on production of that kit.
Thank you for your work on such a great kit!
Excellent presentation.
Maybe you could answer the query posted in the Drydock forum regarding the sailplane control rod
"what must be done to get the magnet equipped servo pushrod and the long planes hull pushrod to mate up and have the FW planes at zero degrees? I have nice, floppy, uppy-downy planes and a long pushrod held in place with split heat shrink tube segments in the upper hull. Length adjustment is needed, as well as alignment for mating the two hull halves with working FW planes so that the two pushrods click together "
Do you have a link to the thread?
❤❤❤
Hi Nate, if you reduce the size of the snorkel tube you would probably be able to ballast her with negative buoyancy if I am not mistaking. My Skipjack has a snorkel and a horizontal plate the limits the amount of ballast water. (R&R system).
Nice clean setup of your boat and WTC by the way 👍
Thanks Robbert! I did consider reducing the snorkel vent hole but the pond is really shallow where I run, so I still prefer ballasting her positively and running at periscope depth. Might consider something similar to R&R on the next boat!
Awesome job. What diameter and length are your lexan dry hull sections?
2.5in tube with 10.25 and 7.25in sections
@@neitoRC thank you.
Can you do a step by step guide on making a scale Uboat in to an operational model.
I know you have touched on this, but for a beginner I would really be interested in such a project.
Also where to purchase the parts and what is needed.
Thank you for your patience.❤
For sure, I have plans on doing such as guide for the Bronco 1/35 Type XXIII kit
@@neitoRC can't wait. Have that particular boat.
What's the Kv of motor you used😊?
750kv
Is this for sale
@@oceanchaser not for sale