You don’t know how happy I am right now. I struggle with back pains a lot and I don’t have a TV remote so I use to have to turn it on manually from the back now i don’t have to!!!!! Thank you so much!!!!
@@nestormelendez9005 what the melkify person said is useless cuz he basicely just repeated what the comment said struggle with back pains a lot and I don’t have a TV remote so I use to have to ***turn it on manually from the back now i don’t have to!***
Very helpful, I always had the old gen that couldn't do it but recently upgraded and this was quick and straight to the point on how to get it done. I will say the newer menu is now set up differently but it wasn't hard to find where I needed to be!
THANK YOU SO MUCH it was wired how I figured out that you could even do this, before I knew that you could do this i turned my Xbox on and it did it sometimes, so I looked up how to do this all the time.
My tv only gives me the toggle option this is the 2nd tv to do this to me. How do I reset the option to try again. I cant get the set up option once iv done this. Only thing I can think to do is a full reset! Help please!?!?
Hi. Don't know if a bit too late but try go into setting of Xbox and look for the option to calibrate tv. Once I had done this the other options "on" and "off" we're there.
I have a Vizio also and the turn on feature will no work unless I set it to toogle. But I'll still need the remote to switch inputs. I don't have this issue with my roku or my firestick. Just the Xbox.
I have a Vizio P65-F1. My Xbox used to turn the TV off and on with no problems. Now it's not working. I hard reset my TV and everything, still doesn't work. My CEC settings are enabled. I tried discovering CEC devices but it didn't find any. Any suggestions?
when i get to device power options then click set up tv then i get to tv set up i click that then it says have kinect? then it says help i have an ir cable then skip then i click skip ans it goes back to tv set up
Idk if it’s my tv or if I’m dense but I have the Xbox series s and my settings doesn’t look like this there is no powder and startup, and then I did find the option but it doesn’t have a toggle or anything and doesn’t seem to work
I have the Xbox One Fat and when I go to the TV Setup it says: "You need Kinect or an IR Blaster to control devices". Does your way work on One S and One X only?
Obviously it has been updated since but I’m unable to finish the set up. When I get to tv setup I am asked if I have a Kinect? And options are to help, IR Cable or skip. But when you skip it just loops you back to TV set up. Any help anyone?
Hey would you be able to help me on why it won’t turn off my tv with the toggle option? That’s the only option the Xbox is giving me no On or Of options
Okay so I sent both of them to automatic when the Xbox turns off to turn off the TV and when the Xbox turns on to turn on the TV but it only turns the TV off when I turn on the Xbox the TV doesn't turn on so if they're both set to automatic then why will it do one but not the other? Again it will turn it off when I turn off the console but when I turn on the console it won't turn on the TV
Power commands, the topic you are describing….. there are 3 types: power, power on, power off. It depends on your make & model of TV which type of “power command” they use. You might need to play around with that if settings allow The power only is like a toggle and it can cause what you are describing
I had my xbox one S set up like this. Bought a new TV and swapped the xbox over to the new TV and when I turn thr xbox off it not only turns off thr TV it's connected to it also turns off the TV it used to be connected to that's 12 feet away and not connected to the xbox whatsoever... does the xbox one S work with some sorta IR or something instead of CEC?? How is it turning a TV off across the room with literally no cables connecting the TV to the console? Has to be IR right?
So I had to hard reset or power cycle my Xbox cuz I was having problems with a game and that's what support told me to do but now I can't change tv volume from the Xbox app also it won't turn the tv on/off when the Xbox turns on/off
Not sure if you still need help with this but I had the same issue when I plugged into a new tv. You simply have to find new code for new tv. On the Xbox settings for tv & A/V power options, you should see an option that says ‘device control’ and there you can delete the tv it had saved and scan again for new tv code. If you need more help I can guide you through it
Please help me I've done all the steps except cec I cant find it but my xbox connects but it doesnt controll my TV at all what can I do it's a sky media tv
So due to Microsoft changing the layout again (thanks for that 🙄) to get to the power options you no longer go to “power and start up” instead, you now need to go to general> power mode and start up. It’s only a sight difference, but for someone like me, It took a bit longer to figure out 🤦🏻♂️
Uuugh I have a Visio and all these steps still didn't work. What's even more infuriating is it used to work until I unplugged the power cable to rearrange my setup; I even walked through all these steps, again, but still a no go 😩
I followed your instructions. It should work. But the thing is, I had it working with my Bravia until I messed around with ATMOS settings. Now I couldn't get my TV to see my Xbox though Bravia Sync Device List. By the way, I am a susbriber. Thank you in advance.
1st !
congrats
@@DarthVader-2737 thanks
neato :0
You don’t know how happy I am right now. I struggle with back pains a lot and I don’t have a TV remote so I use to have to turn it on manually from the back now i don’t have to!!!!! Thank you so much!!!!
Lol there might be a button on ur tv to turn it on
@@melkify7493 can you not read he said the button is on the BACK
@@zeaxx12 and?
@@nestormelendez9005 what the melkify person said is useless cuz he basicely just repeated what the comment said
struggle with back pains a lot and I don’t have a TV remote so I use to have to ***turn it on manually from the back now i don’t have to!***
I have a series X & a gigabyte m28u, I have all the cec options turned on but it still doesn’t work, what can I do?? Please help
How about the new xbox series s cause I'm having trouble to do that
Very helpful, I always had the old gen that couldn't do it but recently upgraded and this was quick and straight to the point on how to get it done. I will say the newer menu is now set up differently but it wasn't hard to find where I needed to be!
Dude! Thank you so much. The CEC setting was the missing piece for me. I couldn't figure it out till I watched your video. Thanks again!!!
Me2
How did that work for you. I don't have CEC so it won't work for me. How did you do it??
Oddly not working for me. Tried on and toggle mode both. Changed the tv settings as well.
Can you do this with RCA TV pls bc I tried this and no luck
THANK YOU SO MUCH IVE SPENT HOURS TRYING TO FIGURE THIS OUT 🤩🤩
Thanks bro, I don’t have the remote to my tv, now I don’t have to get up every time I want to turn the tv off or on, appreciate it👍🏻
Same
How did you click the cec without the remote that’s what I’m confused about
Thank you, this helped me immensely. Thought I was going crazy because I couldn’t find the right setting to turn this off.
Worked flawlessly. 🙏🏼 thanks
Thanks! There’s no remote app for my analog tv and now I can turn on and off the tv with the Xbox 🔥
Omg thanks soooo much I thought this was only for high end TVs but it worked!! Thanks love from the UK
You gotta update the video but thank you for the help🤞🏾
Very helpful video. My issue was that my Vizio tv needed the toggle option selected in order for my tv to turn on with my xbox. Thanks again
too bad that Microsoft removed this options :(
This totally helped me. Thank you
Exactly what I needed to know.
Thanks very much!
Thank you so much.. thisbhas been doing my head in for bloody ages..
So... I don’t get those options around the 3:20 mark, is there a way to fix that, or is that a permanent thing?
I don’t have it either
THANK YOU SO MUCH it was wired how I figured out that you could even do this, before I knew that you could do this i turned my Xbox on and it did it sometimes, so I looked up how to do this all the time.
How coincidental that I have the exact same tv, this video helped so much
Which tv is it?
My tv remote litteraly disappeared, now i can sneak hehehe 💀
I'm having trouble with my Sansui TV it's not Auto connecting and I can't find the model on the Xbox any ideas?
Nevermind I got it I didn't read the part where it said I have to keep trying it until it found the right code choose for or this tutorial
My tv only gives me the toggle option this is the 2nd tv to do this to me. How do I reset the option to try again. I cant get the set up option once iv done this. Only thing I can think to do is a full reset! Help please!?!?
Hi. Don't know if a bit too late but try go into setting of Xbox and look for the option to calibrate tv. Once I had done this the other options "on" and "off" we're there.
I have a vizio tv and did everything in the vid and it’s still not working...
Im having the same problem, I dont know if its because the tv is an older model or what
Sublime ever get it I have the same problem?
Chadd Maddalone nope I never figured it out, just gave up and use my remote lol
I have the same problem. I’m not sure why it’s not working either.
Yup I got Vizio no clue why it doesn’t work
I have a Vizio also and the turn on feature will no work unless I set it to toogle. But I'll still need the remote to switch inputs. I don't have this issue with my roku or my firestick. Just the Xbox.
I was actually new to this and it did work for me thank you for your help
You got my sub and like. THANKS 🙏 A LOTTTT!!!
This is so cool bro thank you
What about an LG TV? My Sony Bravia always connected automatically, but my LG B9 will not sync with the Xbox.
I have a Vizio P65-F1. My Xbox used to turn the TV off and on with no problems. Now it's not working. I hard reset my TV and everything, still doesn't work. My CEC settings are enabled. I tried discovering CEC devices but it didn't find any. Any suggestions?
Can't figure this out on the series x. It don't have this setup feature
Wow thanks. Wasn’t aware the Xbox had this function. I’m sure I read years ago that it didn’t and didn’t pursue it.
No problem 👍
when i get to device power options then click set up tv then i get to tv set up i click that then it says have kinect? then it says help i have an ir cable then skip then i click skip ans it goes back to tv set up
Martin Rushoe I'm having the same problem. It doesn't give me an option to manually choose a tv model, just Kinect or IR emitter.
Very helpful. subscribing.
Thank you for this!
Do I need what you have next to the Xbox console ?
Idk if it’s my tv or if I’m dense but I have the Xbox series s and my settings doesn’t look like this there is no powder and startup, and then I did find the option but it doesn’t have a toggle or anything and doesn’t seem to work
Worked flawlessly thanks
Thank you! You made my life easier
Wow thank you for the help I didn’t know was that easy
I have the Xbox One Fat and when I go to the TV Setup it says: "You need Kinect or an IR Blaster to control devices". Does your way work on One S and One X only?
i m using a basic projector, can u help with that. it detects its remote but doesn't power on or power off.
Cool but is there a way for the xbox to turn on the tv but not turn it off at the end?
I got so tired of having to get up and walk to my tv to turn it off when I was done with it thank u so much
I just bought a smart TV and I want the opposite when I turn the TV on. It’s automatically turning my Xbox on and I don’t want that. How do I stop it?
Hey! Is there a way I can make it to where my TV will turn on my Series X? My TV would turn my Xbox One on when I'd switch the TV to that input.
Obviously it has been updated since but I’m unable to finish the set up. When I get to tv setup I am asked if I have a Kinect? And options are to help, IR Cable or skip. But when you skip it just loops you back to TV set up. Any help anyone?
my tv wont turn on but it turns off
Same
I used to have a ps4 and it done it perfectly but my Xbox still won’t do it
SAme
I don't have a tv setup option on my series X how do I manually put it in
Hi! I have a Hisense tv and it will not work for me. Idk if you might have an idea for what I need to do! Hope all is well.
my xbox is claiming i need an infared cable... and hitting skip just sends me back to the menu
Thank you thank you very awesome video
Thank you I have a vizio so it was pretty easy
Nvm its not working now. Hmm
It says no cec devices are connected
Thanks man super helpful !
Hey It didn't work my tv is still on. Do I have to set my xbox to energy-saving mode?
So I have this problem where I have a monitor but when I turn my x box on it turn on my tv even though it’s not connected
Hey would you be able to help me on why it won’t turn off my tv with the toggle option? That’s the only option the Xbox is giving me no On or Of options
If you guys have an older tv use toggle it worked for me
Guys if you have any issue with it detecting your TV just unplug the HDMI and plug it back in again and make sure CeC is on on your TV
thanks man. i had to change the if settings to toggle
My TV doesn't seem to have CEC the brand of my TV is manta if that means anything
Okay so I sent both of them to automatic when the Xbox turns off to turn off the TV and when the Xbox turns on to turn on the TV but it only turns the TV off when I turn on the Xbox the TV doesn't turn on so if they're both set to automatic then why will it do one but not the other? Again it will turn it off when I turn off the console but when I turn on the console it won't turn on the TV
Power commands, the topic you are describing….. there are 3 types: power, power on, power off. It depends on your make & model of TV which type of “power command” they use. You might need to play around with that if settings allow
The power only is like a toggle and it can cause what you are describing
This didnt work for my tv
I have a sanyo roku tv model fw32r19f
The xbox didnt auto recognize my tv. The tv is plugged into the hdmi arc port.
You may have to look for an instant on setting in your TV's settings.
Arc port is for Audio return from your tv. Use a different port. The arc is used to connect to surround sound system.
For some reason my Xbox and tv will turn off but when I turn my Xbox on the tv will not turn back on
Thank you now I don’t have to go upstairs and get my remote thinking is downstairs so I can turn it on
What do I do if my Xbox doesn’t have the power and set up option???
Jesus Doria Settings > General > Power mode & startup > TV & A/V power options. Walla
POV : you lost your controller for your TV and can’t be bothered to hurt your back just to turn it on and off
Thanks I was missing tv cce thingy too
I had my xbox one S set up like this. Bought a new TV and swapped the xbox over to the new TV and when I turn thr xbox off it not only turns off thr TV it's connected to it also turns off the TV it used to be connected to that's 12 feet away and not connected to the xbox whatsoever... does the xbox one S work with some sorta IR or something instead of CEC?? How is it turning a TV off across the room with literally no cables connecting the TV to the console? Has to be IR right?
Its the invisible to the human eye IR signal emitted from your remote that’s turning off the former Xbox TV
I don't have CEC in my tv's settings.
Same
Yo this helps so much since I have to look for the power button in the back of my tv and it’s hard since I have big hands
How do I do the opposite? My xbox turns on when I turn my tv on and I don't want it on. I tried turning cec on and off didn't change
Look at power on/off settings within Xbox settings
@@Allabouthomeelectronics thanks for the quick reply, but no luck cant find anything besides like instant on/energy saving in there.
So I had to hard reset or power cycle my Xbox cuz I was having problems with a game and that's what support told me to do but now I can't change tv volume from the Xbox app also it won't turn the tv on/off when the Xbox turns on/off
Is there a way u can turn of ur TV without turning of your xbox from your xbox
What do you do if you have already set this up on another tv and now you can’t change it?
Not sure if you still need help with this but I had the same issue when I plugged into a new tv. You simply have to find new code for new tv. On the Xbox settings for tv & A/V power options, you should see an option that says ‘device control’ and there you can delete the tv it had saved and scan again for new tv code. If you need more help I can guide you through it
Andrew what a guy
This just helped so much
So this used to work now my new TV won’t work with it and I’m absolutely livid. Please help.
So I broke my remote so will this work or not before I turn off my tv it’s a vizio with no power button with it
Thank you so much. When I got this I thought it was a expensive coaster for my coffee table. But how use the tv?
Nice thanks I did it right now
i have the exact same settings and it doesn't work. i know my TV supports it because it works with my nintendo switch.
Please help me I've done all the steps except cec I cant find it but my xbox connects but it doesnt controll my TV at all what can I do it's a sky media tv
Yo thanks so much
Does this work for hitachi? 😅
The set up TV is not available for me can you please help me out
I trying to connect my projector and I can't seem to get it to work
turning on my tv it works with toggle but turning off the tv it turns off with the setting off. It doesnt work with both toggle nor the on and off.
So due to Microsoft changing the layout again (thanks for that 🙄) to get to the power options you no longer go to “power and start up” instead, you now need to go to general> power mode and start up.
It’s only a sight difference, but for someone like me, It took a bit longer to figure out 🤦🏻♂️
Great video
I want to know how to do it with a xbox one fat with the kinect
Uuugh I have a Visio and all these steps still didn't work. What's even more infuriating is it used to work until I unplugged the power cable to rearrange my setup; I even walked through all these steps, again, but still a no go 😩
I need help when I hold the home button the turn of xbox screen does not come up
I followed your instructions. It should work. But the thing is, I had it working with my Bravia until I messed around with ATMOS settings. Now I couldn't get my TV to see my Xbox though Bravia Sync Device List. By the way, I am a susbriber. Thank you in advance.
Hey man, love the vid, I have a msi monitor and it doesn’t do anything
How do you do it with the series s
Good vid!