So you can talk skip on a mobile? I haven't yet but I have a bearcat 980 SSB Wilson magnet mount and a kl203 haven't tried skip really because I wasn't sure if it was possible in a mobile. Thanks for the info
@@trackpackgt877I had the 980ssb and talked to Baton Rouge LA one night from 20mi north of Cincinnati OH with a bone stock radio in the big truck and predator 10k antenna. It all depends on the conditions as long as you have a decent set up, nothing fancy or top of the line, just decent. I talked to a guy in UK a couple weeks ago from an old Maxlog m-8800 and a Hy-Gain penetrator literally 5ft off the ground on a T post in the yard 😂😂
G'mornin' Rooster ☕☕ . I'm looking to pick up a new Rig here in a few days & it looks like you just did my homework for me as I'm going to need a new radio and amp for it and this is exactly the ballpark I was looking to be in outpyt & power-wise, Thanks 😃
I bought one of these RM italy 503 HD from you on Ebay, its great. I combine it with an AT-6666. With around 20 watts in on FM (12 o'clock) it does around 190 watts forward (I don't have a PEP meter) I use it mainly on SSB to talk all over the world. I'm guessing its def doing 300-400 PEP on SSB. I get nothing but good reports with this combo.
@@johnalger9991 With the At-6666 and RM italy combo I find I get the same output if I run 20 watts FM into it or 35 watts so obviously I back it off a little. I find the FM carrier the easiest way to set up both the SWR tune and get an idea of the power out. On SSB my meter peaks over 200 straight watts so I'm guessing that's around 3-400 PEP
@@peterdawson3536hi Peter, after 40 years away, I’m getting back in with the same rig (at6666) as you have (only not the 503HD but the 503). Plan on using in my car for when I’m in the boonies without cell service. Cheers😊👍🇺🇸
@@BobJones-zw3ui Be careful on turning the RF way down on the at-6666 for the standard 503, you could easily blow it up. The HD is better for the AT-6666
Thanks for the explanation. I have a DX 5000 PLUS and I have a RM 503 HD Amplifier, but the problem is that the Amplifier in the Transceiver does not work properly, and the power extracted from the Amplifier does not appear in the watt meter, only the Transceiver power appears. Is there anything in the Transceiver settings for it to work properly? I hope to find the solution. Thank you.
Ordering a 503HD later today, great amp paired with the Q6 also, 25/-30w is plenty input. Had a 503/505v & Zetagi B550p, but I do like my Rm's, I also use a 203p 😊
@@Rooster_Radio I'm in England mate, I'd be hitting you up for a 2 by 4 pill otherwise. Tried the others, this just being 1-35w all bands, I'll be happy with 20 - 25w input & 200w out, maybe after this I'll save up for a plug in the wall Acom or the likes. Great video as always matey, appreciate the reply, from the 407 Mcr Uk 👋
I got a lot of radios. This is my favorite. Awesome recieve and sounds hifi. I use an MXL studio mic through a mixer on mine. Easily the best sounding setup I own. So glad a grabbed a version 1 while they were still available.
Thanks for the explanation. I have a DX 5000 PLUS and I have a RM 503 HD Amplifier, but the problem is that the Amplifier in the Transceiver does not work properly, and the power extracted from the Amplifier does not appear in the watt meter, only the Transceiver power appears. Is there anything in the Transceiver settings for it to work properly? I hope to find the solution. Thank you.
@@Rooster_Radio Don't sweat it Rooster. To each is one's own. You like red I like blue. No need for negative comments. Everyone is different and will chose different set ups. I appreciate the reviews and personal input.
The anytone 5555 plus i ordered from you is great , I was told by a local contact that it was the best sounding radio they have ever heard!
They are amazing sounding radios. My personal favorite to listen to for everyday talking
I’ve talked all over the world with this radio a kl203 and a Wilson 1000 in a mobile it’s a great setup
So you can talk skip on a mobile? I haven't yet but I have a bearcat 980 SSB Wilson magnet mount and a kl203 haven't tried skip really because I wasn't sure if it was possible in a mobile. Thanks for the info
I’m going to have the same setup, just ordered the kl203p last night in case I want to have more power lol
@@trackpackgt877I had the 980ssb and talked to Baton Rouge LA one night from 20mi north of Cincinnati OH with a bone stock radio in the big truck and predator 10k antenna. It all depends on the conditions as long as you have a decent set up, nothing fancy or top of the line, just decent.
I talked to a guy in UK a couple weeks ago from an old Maxlog m-8800 and a Hy-Gain penetrator literally 5ft off the ground on a T post in the yard 😂😂
G'mornin' Rooster ☕☕ . I'm looking to pick up a new Rig here in a few days & it looks like you just did my homework for me as I'm going to need a new radio and amp for it and this is exactly the ballpark I was looking to be in outpyt & power-wise, Thanks 😃
I bought one of these RM italy 503 HD from you on Ebay, its great. I combine it with an AT-6666. With around 20 watts in on FM (12 o'clock) it does around 190 watts forward (I don't have a PEP meter) I use it mainly on SSB to talk all over the world. I'm guessing its def doing 300-400 PEP on SSB. I get nothing but good reports with this combo.
running the same setup and good reports back
@@johnalger9991 With the At-6666 and RM italy combo I find I get the same output if I run 20 watts FM into it or 35 watts so obviously I back it off a little. I find the FM carrier the easiest way to set up both the SWR tune and get an idea of the power out. On SSB my meter peaks over 200 straight watts so I'm guessing that's around 3-400 PEP
@@peterdawson3536hi Peter, after 40 years away, I’m getting back in with the same rig (at6666) as you have (only not the 503HD but the 503). Plan on using in my car for when I’m in the boonies without cell service. Cheers😊👍🇺🇸
@@BobJones-zw3ui Be careful on turning the RF way down on the at-6666 for the standard 503, you could easily blow it up. The HD is better for the AT-6666
Thanks for the explanation. I have a DX 5000 PLUS and I have a RM 503 HD
Amplifier, but the problem is that the Amplifier in the Transceiver does not work properly, and the power extracted from the Amplifier does not appear in the watt meter, only the Transceiver power appears. Is there anything in the Transceiver settings for it to work properly? I hope to find the solution. Thank you.
Good morning! It's all good some of us never sleep. Was looking for goodies but yes that's a good radio and for average get around amp.
Ordering a 503HD later today, great amp paired with the Q6 also, 25/-30w is plenty input.
Had a 503/505v & Zetagi B550p, but I do like my Rm's, I also use a 203p 😊
Think I have two 503hd left in stock
@@Rooster_Radio I'm in England mate, I'd be hitting you up for a 2 by 4 pill otherwise.
Tried the others, this just being 1-35w all bands, I'll be happy with 20 - 25w input & 200w out, maybe after this I'll save up for a plug in the wall Acom or the likes.
Great video as always matey, appreciate the reply, from the 407 Mcr Uk 👋
Just bought one of these myself but the lierature is saying 1-6watts input is that dead key ? Also in the uk
I got a lot of radios. This is my favorite. Awesome recieve and sounds hifi. I use an MXL studio mic through a mixer on mine. Easily the best sounding setup I own. So glad a grabbed a version 1 while they were still available.
hello , What is the mobile transceiver do you recommend that will work well with the RM 503 Amplifer ?
I have one of those coming in the mail Monday
Thanks for the explanation. I have a DX 5000 PLUS and I have a RM 503 HD
Amplifier, but the problem is that the Amplifier in the Transceiver does not work properly, and the power extracted from the Amplifier does not appear in the watt meter, only the Transceiver power appears. Is there anything in the Transceiver settings for it to work properly? I hope to find the solution. Thank you.
Do you have any kl 503 hd amplifiers for sale?
Good mornin Rooster
U do great unscripted videos, nice job
RM Italy are great amps.
I’m looking to get a quad 5 .
I have them in stock
Do you set these up to run on 11m ?
There’s nothing to it
Why do you say that? The quad five is not an audio monster, that sounds pretty monstrous to me.
I bought the amp from you a while back, how much for the radio?
www.roostercb.com/store/p212/Anytone_AT5555_Plus%2C_Ready_to_GO%2C_Free_Shipping.html#/
Just ordered, thank you sir .
What is a "daykey"?.
Maybe you should turn subtitles on
Thanks for your help.@@Rooster_Radio
Great video brother Thank you
Do you have or able to get that amp? Thx
roostercb.com in stock new under used and special items
CAN THE FATBOY 12 PILL OR 16 PILL BE PURCHASED BIASED "B" FOR SSB ?
Can use a 6666 with 503 not high drive
@@JohnnyMcKinney-v6w maybe if it's stock
@Rooster_Radio thanks it's not stock does 110 pep
That`s a sh*tty radio, all versions or 'brands'. Just saying...
You rolled over on the wrong side of the bed
@@Rooster_Radio haha could be
@@Rooster_Radio Don't sweat it Rooster. To each is one's own. You like red I like blue. No need for negative comments. Everyone is different and will chose different set ups. I appreciate the reviews and personal input.
I disagree but to each his own 73 guys
Anytone best bang for the buck. Love my 5555N