As someone who works with 3d files for 3d printing… I KNOW creating new files is NOT a "shortcut"... It's a "long cut" you should be proud, and not let any haters put you down, my dude. Awesome job!
I’d like to see you make a new, undamaged Mjolnir using the laser cutter for the runes like you did here. This way all your hammers match and you can save the original for posterity.
It took me a couple of days to catch up with your video. **sighs** life stuff. That turned out amazing. Really love the way you are enjoying your new laser engraver. And now I really want to see how you make the next one light up. Just now learning how to do lights myself and I'm eager to sit at your knee and absorb new things. You are my hero, sir!
Oh I love it! So amazing! What a good lesson on learning from previous experience! 😆 and light up hammer?! Yes please! Glad you’re back making videos! 😁😁😁
The laser looks amaizng! I think when I make my own I might try and imprinting the foam. I have done it before and it works. I saw Punish Props take the same idea and 3D print it which I thought was awesome. Now that I have a nicer 3D printer I plan to make “stamps” of the end details and heat the foam and then imprint them onto it ( making a negative file so I get the raised details correct ). Just wanted to say that idea if anyone else wanted to try it as well if you can’t get your hands on a laser but still want to try to be more accurate! Or if you couldn’t find something like a belt that looks good in place.
This is a nice evolution of this prop, especially they way you have built on what you had made before. Pity about the handle, but I am sure that you will remake it as soon as you can get more of those conchos. From someone who wears the hammer everyday, Well done!
another way to get the detailing on the edges of the hammer is by 3D printing a stamp, heating up the foam, and imprinting it into the foam while its warm. Seems to transfer textures really well
Another fantastic build! BUT, I cannot wait for the light-up version, that's the one I wanna build, and I'll have to find a makerspace somewhere to get the lasering done!
Odin, you did place the pommel in the correct orientation on the hammer for this one, but the points of the handle need to face the same way as the square sides of the hammer, rather than the broad face
I'll again suggest that you use the laser to cut a mask that you stick to the foam. Then use a spritzer to spray solvent which will eat away at exposed foam. It's just like acid etching metal.
I thought i would always prefer the look of the clean hammer but i love the look of the cracked hammer more then the clean one for some reason 😂 i really want to make one
That is just amazing that piece looks better than the one from Hasbro I'll be making my in that lights up but I look forward to seeing the style you use
I loved that movie when it was new! And I started making really bad cardboard and wire hanger versions of the spider bots! I also enjoyed how the Runaway armor kept popping up in low budget movies and TV shows.
@@OdinMakes The chain mail under suit with ballsistics vest and padding over the top? I always remembered the spider bots on the construction site lift and the guided bullets scenes as a child (baring in mind I first saw it at the end of the 80s as I was born the year it originally came out 🤣)
Something that would be amazing if you made would be the Giant Crusher hammer from elden ring. You do such amazing builds with all sorts of weapons so it would be cool to see how it would come out!
Looks great! Only thing I think that would be cool to add or something to do if you made another was to make one where the cracks glow, similar to your God of War Axe that you made (which was also amazingly cool)! Not sure how you'd make that but I'd love to see it some time!
It would be cool if you thinned out the cracks and put a button in the handle and added some bright blue lights in the cracks for lightning, just my opinion Me after finishing video, I didn't realize you were planning on doing it
Hey odin! I know you’ve used the threaded ends of painters poles before for making travel safe long props. I wonder if you could use the same method to be able to swap out the mjolnir heads and only use 1 handle? Just a thought
Since I don't have access to a laser engraver I would use my wood burning tool to engrave the cracks and symbols. I'd love to see you tackle some of the weapons from "Buffy: the Vampire Slayer." Specifically the Scythe and Faith's Jackal knife, but also Giles' two-headed axe and the Hunga-Munga.
The detail on the engravings is so goooood! Laser cutting is never cheating imo, you worked hard enough to have the machine, it'd be a waste to not use it :) I have a quick question, how hard would it be to cut yoga blocks without a band saw? 🤔 I would need to use some for a project but i don't know how manageable it would be without the "right" tools
Could you heat the metal shells so they bend? I know when I bought this fancy zipper bit for the handle of my lightsaber I hammered it around a wood dowel. 🤷
hey Odin, I think it would be awesome if you could make The Grand Inquisitor's Dual bladed lightsaber from the Kenobi show! I think it would look awesome
Have you considered using a 3D printer to make more sturdy and accurate parts? I printed a Thor’s hammer for myself and it was sturdy enough to fill the head with sand and make a hefty hammer
looks amazing! Can't wait to see how you tackle the lighting. I can't seam to get mine to totally show up on camera.
Thank you Jake!
I plan on doing it pretty much the same way I did the Leviathan Axe, I hope it works out the same!
@@OdinMakes cool! I'll have to go back and check that one out!
Seem*
It would be neat to put magnets in the ragnarok version to "reform" it so it could split apart like in the trailer.
That seems like alot more effort than its worth
@@buffgoji2986 not really, just cut small holes in the pieces and put tiny little magnets in with super glue
@@buffgoji2986 it is.
@@Janthdanl no. You'd still have to out it together like a 3d puzzle. What's the point?
@@rockinHurley777 it would be cool. why is it such a big deal that someone wants to do this?
This guy is incredible!!
Thank you!
Odin you made the hammer now you gotta make zeus's bolt i mean you gotta make all the lightning weapons right
Yes absolutely !!! He's obliged for that !!
I being a craftsman who works metal I made the iron thor hammer with an aluminum handle and I made the video even if it didn't go as I hoped 🥲
Bsbs
Another awesome build. Great job Odin!!
As someone who works with 3d files for 3d printing… I KNOW creating new files is NOT a "shortcut"... It's a "long cut" you should be proud, and not let any haters put you down, my dude. Awesome job!
Seeing the side by side at the end is really cool. Shows how much better you’ve gotten with practice.
Superb work. . . . as usual.
Hail Odin!
This looks absolutely incredible, it's mesmerizing to watch you put your skills to work. You absolutely ARE worthy IMHO! 😍👍
That looks really cool
Fantastic improvement
Wow! That was awesome
Thank you Fisson Creations!
I did see your comments in the live premiere as well!
This is beautiful.
Good to see you’re still going strong. I’ve been watching for about four years, and I’ve loved every video you’ve uploaded. Stay amazing, Odin.
The Way You learned from the previous hammer build and made it even more perfect in this once is kinda awesome 🔥
That's awesome! The lazer cut cracks and details look amazing and really line up well!
Dude, your content is so underrated. You make all of your replicas to perfection and you deserve more subscribers than you have.
OMG! I want one that lights up!
Awesome work. Looks amazing. Love seeing adjust ad you go and handling the challenges and errors that happen
The cracks and pitting really hide the seams between your panels, looks really good. Awesome to foam master work his magic once again.
I’d like to see you make a new, undamaged Mjolnir using the laser cutter for the runes like you did here. This way all your hammers match and you can save the original for posterity.
It took me a couple of days to catch up with your video. **sighs** life stuff. That turned out amazing. Really love the way you are enjoying your new laser engraver. And now I really want to see how you make the next one light up. Just now learning how to do lights myself and I'm eager to sit at your knee and absorb new things. You are my hero, sir!
I would love, love, LOVE to see you tackle the Dragonslayer from Berserk
Beautiful!!!!!!!
No denying how cool the laser cutter is though! Odin the Futuresmith!✨
The finished product is really beautiful. Thank you for your sharing. I'm going to try to make similar handicrafts. I hope I can be as good as you
Love to see your work has evolved. It remains glorious but, has definitely become more refined :)
Oh I love it! So amazing! What a good lesson on learning from previous experience! 😆 and light up hammer?! Yes please! Glad you’re back making videos! 😁😁😁
Thank you Miss Mary Mack!
Looks real! Great job, I mean a better way to do it would be to smash the hasbro one a glue it back together. This is also good. Lol
You can add a kerf offset to Lightburn to account for the material the laser removes as well as the shrinkage.
The laser looks amaizng! I think when I make my own I might try and imprinting the foam. I have done it before and it works. I saw Punish Props take the same idea and 3D print it which I thought was awesome. Now that I have a nicer 3D printer I plan to make “stamps” of the end details and heat the foam and then imprint them onto it ( making a negative file so I get the raised details correct ). Just wanted to say that idea if anyone else wanted to try it as well if you can’t get your hands on a laser but still want to try to be more accurate! Or if you couldn’t find something like a belt that looks good in place.
I have seen the 3d printed stamps, and I love the way it looks! Right now, i am better laser cutting than 3d printing
“Can’t fix that now” awesome
This is this weeks project for me to try x
I love your intros to these videos!!! :)
Looks awesome mate had my doughts about how it would look with the panels together but you pulled it off nicely
Thank you Barry!
Doubts*
Out did yourself again on making another awesome prop.
Thank you David!
Amazing you are very talented
Thank you!
It may have took a lot of time getting your templates right, but this came out so great. Love the update so much 😍
Remake the Stormbreaker!
This is a nice evolution of this prop, especially they way you have built on what you had made before. Pity about the handle, but I am sure that you will remake it as soon as you can get more of those conchos.
From someone who wears the hammer everyday, Well done!
another way to get the detailing on the edges of the hammer is by 3D printing a stamp, heating up the foam, and imprinting it into the foam while its warm. Seems to transfer textures really well
Another fantastic build! BUT, I cannot wait for the light-up version, that's the one I wanna build, and I'll have to find a makerspace somewhere to get the lasering done!
Odin, you did place the pommel in the correct orientation on the hammer for this one, but the points of the handle need to face the same way as the square sides of the hammer, rather than the broad face
I'll again suggest that you use the laser to cut a mask that you stick to the foam. Then use a spritzer to spray solvent which will eat away at exposed foam. It's just like acid etching metal.
Ah, That would work really well on styrofoam! Thank you, gives me ideas!
This is amazing. An ooohhhh my days yes plzzz re do stormbreaker 😱😱😱😱
Love your videos.
Thank you!
I thought i would always prefer the look of the clean hammer but i love the look of the cracked hammer more then the clean one for some reason 😂 i really want to make one
Hell yeah, I was hoping you were going to make one in the future where the cracks light up. 👍
just impressive^^
That is just amazing that piece looks better than the one from Hasbro I'll be making my in that lights up but I look forward to seeing the style you use
Boy, the sky is the limit on what you can do now with that laser-cutter both with new projects and revising older-ones.
3:50 also reminded me of a bulky version of those Spider bots from the film Runaway with Tom Selleck and Gene Simmons
I loved that movie when it was new! And I started making really bad cardboard and wire hanger versions of the spider bots!
I also enjoyed how the Runaway armor kept popping up in low budget movies and TV shows.
@@OdinMakes The chain mail under suit with ballsistics vest and padding over the top?
I always remembered the spider bots on the construction site lift and the guided bullets scenes as a child (baring in mind I first saw it at the end of the 80s as I was born the year it originally came out 🤣)
If you can make the cracks glow, that would be sick!
Amazing work , i hope you also make Gorr's necrosword in the future !!!
Kudos to you and your patience! Lord knows I don’t!
_It took much longer than I had anticipated_ ...
Name of machine *Longer* -pun intended?
Silent feel great knife
Silent Hill great knife
i wouldve made it out of acrylic so leds could be put inside and make the cracks glow
If you watch all the way to the end, I talk about making one that will glow! But I won't use acrylic. I don't want it to break if it gets dropped.
Something that would be amazing if you made would be the Giant Crusher hammer from elden ring. You do such amazing builds with all sorts of weapons so it would be cool to see how it would come out!
This was awesome can't wait for v2 of both mjonir and stormbreaker.So could you please make green goblins helmet
nice prop
Looks great! Only thing I think that would be cool to add or something to do if you made another was to make one where the cracks glow, similar to your God of War Axe that you made (which was also amazingly cool)! Not sure how you'd make that but I'd love to see it some time!
I talked about that in the end, I plan on it
@@OdinMakes Oh sorry I must've missed that bit at the end 😅
That's what happens when I multi-task YT and study I suppose Lol
yey a build video
I would love to see Dante’s Rebellion sword from Devil May Cry. That would look amazing!
It would have been cool to do a acrylic head so that it could glow blue from the inside. Version 3 maybe?
Maybe!
Yessss do it make another stormbreaker
You gotta do Thor’s new helmet from Love and Thunder!
It would be so cool if you made the bfg from doom eternal I would make that in a heartbeat love your videos man
Thank you Jojo!
It would be cool if you thinned out the cracks and put a button in the handle and added some bright blue lights in the cracks for lightning, just my opinion
Me after finishing video, I didn't realize you were planning on doing it
Just goes to show that even if you have access to fancy equipment it doesn't mean it is a shortcut.
I Loved the mechagodzilla costume
Hey odin! I know you’ve used the threaded ends of painters poles before for making travel safe long props. I wonder if you could use the same method to be able to swap out the mjolnir heads and only use 1 handle? Just a thought
You could use that wrongly made handle to make Thunderstrike (Eric Masterson) mace from the comics
Odin for your next video you should make the version of excalibur from once upon a time
Since I don't have access to a laser engraver I would use my wood burning tool to engrave the cracks and symbols. I'd love to see you tackle some of the weapons from "Buffy: the Vampire Slayer." Specifically the Scythe and Faith's Jackal knife, but also Giles' two-headed axe and the Hunga-Munga.
Can you make the zurg ion blaster? (The original is simpler if thats an issue) please?
I can look, I am excited for the new Lightyear movie!
Odin makes should make Gorr the God butcher sword next and stormbreaker.
You should totally make the Grafted Blade Greatsword from Eldin Ring.
I used a stamp to make the runes on the side. Heat the foam then press the stamp and it works a treat 👍. No it's not cheating
It's a bit of an older prop to make but any chance you can make the Mk 50 infinity war shield iron man briefly uses against thanos?
The detail on the engravings is so goooood! Laser cutting is never cheating imo, you worked hard enough to have the machine, it'd be a waste to not use it :)
I have a quick question, how hard would it be to cut yoga blocks without a band saw? 🤔 I would need to use some for a project but i don't know how manageable it would be without the "right" tools
Could you heat the metal shells so they bend?
I know when I bought this fancy zipper bit for the handle of my lightsaber I hammered it around a wood dowel. 🤷
Plz remake stormbreaker. And also what are the dimentions for Mjolnir. I would like to make one myself but can't find the accurate sizes.
Is there anyway you could make the metal spiderman webshooters the Ben Reilly ones not from his homemade suit but his signature suit
Hera pheri music vibe ,😜
I would love this for my THOR collection!! How cool would it be if it could light up from inside so the "cracks" were blue?!
any chance we'll see Jane's helmet or Thor's new one?
There is a chance!
Now you've made many different MCU thors hammers/hammer like weapons you should make the god of war thors hammer.
I have been looking at it!
May I request Jetstream Sam's HF Murasama blade?
I think you'd have a great time with that one!
I wonder what's next...maybe a blackbolt helmet
hey Odin, I think it would be awesome if you could make The Grand Inquisitor's Dual bladed lightsaber from the Kenobi show! I think it would look awesome
Will you be putting a file for the laser engraved detail on your etsy?
Are the laser files available Odin? Please and Thank you! :D
Yes! I have them for free on odinmakes.com
Or at least a PDF, I can look for my lightburn file if you need.
when are you going to make the power stone, Odin? because I would like to see that video about it.😄
Is there any chance that you would provide the laser cut files?
I did exactly the same thing on the top circle of my 3D printed mjolnir 😂 used the "RUNES" font
Maybe Something Like A Dath vader helmet That would be cool
Have you considered using a 3D printer to make more sturdy and accurate parts? I printed a Thor’s hammer for myself and it was sturdy enough to fill the head with sand and make a hefty hammer
I hoped for lights, still cool tho
Hi Odin you're the best. Please make a Moon Knight props too. I'm a huge fan of Moon Knight.