Another How to PROPERLY Soak your Gel Ball Blaster Gel Beads Video
ฝัง
- เผยแพร่เมื่อ 3 ก.ค. 2022
- Many sellers have expressed how many returns they received because customers cannot follow directions regarding how to soak the gel beads. This video tries to make the process as simple as possible
Thanks man, this also made me less paranoid about buying a gel blaster because people kept saying it won't shoot, but it's just their incorrect way of using the gel balls.
90% of returns/complaints are due to stupid people!! Make sure you sub, I give away $200+ in blasters/accessories every month in a TH-cam contest. March starts FRI!
Just got mine as a birthday gift any more tips that you know?
Just got mine as a birthday gift, do you have any more tips that I should know of?
@@Rememezeeyt you need to be a little more specific 😀what did you get? That might help
h
Im new to the gel blaster getting my m416 doing my research and this video was helpful..
Great. Thanks! Make sure to participate in all my giveaways too!!
@@GelBallBlasterMaster why aren't my gel balls growing?? there still small and its been over 24 hours..
@@dxsireclxwnz5262 is the container big enough? Did you use enough water?
@@GelBallBlasterMaster Well I put them in a container that you would usually make lemonade in but I put all the gel balls in them And I think the bag had like 10K balls in them. But they only grew a little bit and then stopped growing and I tried to take some out and put a little bit of them in another container but they just got smaller and smaller! Any idea??
@@dxsireclxwnz5262 your container was probably too small and you likely did not use enough water
Thank you this video helped a lot
Great! Don’t forget to participate in the monthly giveaways. Over $200 in custom blasters and accessories every month!!
Thank you man🎉❤
No problem 👍 make sure you participate in the monthly blaster contests. April 2024 is live. Go to my channel main page and watch the video on how to enter/participate
Thank you just plain thank u
Happy to help! Make sure you subscribe. I give away over $200 worth of blasters and accessories every month!!
For longer storage can you leave them in the water and drain only when needed?
No
@@GelBallBlasterMaster the growth of orbeez depends on the water that will be used sir? My orbeez have been soaked for 24hrs because they are still small, what should I do?

@@inktripmanila2306 sometimes u need to use bottled or distilled water. Did u try that?
I have some questions:
Can they be used for the blaster immediately after dipping them and letting them reach the right size?
Should it be kept at room temperature or in the fridge for storage? and in summer?
if I have opened a jar or the sachet with the balls, if I don't immerse them as long as they can be stored in a jar for example (in their normal state)?
Yes, they can be used as soon as they are the right size. Storing at room temp should be fine (some say they last longer) - I try not to make an excessive amount at one time too. Beads last forever if you haven't soaked them, it doesn't matter if they are exposed to air. Subscribe and participate in the giveaway that starts tomorrow. Over $200 in custom blasters and accessories every month in my youtube contests.
Is it ok to store the beads in the water and close the lid for a week or two?
Drain first. Then store in air tight containers
If you keep water in the container, they'll try to siphon more water and get too big or get destroyed
Well done..just got my boy his first blaster. How wet or dry should the balls be before loading them into the magazine?
Drain them completely, but it is ok if they are "wet" to the touch. You do not want to poor any excess water into the blaster (obviously) - as long as you drained them, you should be fine, plus never leave them in/on the blaster when not in use
@@GelBallBlasterMaster really appreciate the feedback...just making paper targets now...and setting up some sawhorses with pop cans...thanks!🤠
@@terryf5131 happy to help. I am an old guy with kids as well, unfortunately they didn’t get into these as much as I was hoping, but I really enjoy making custom ones now. Please subscribe and participate in the monthly giveaways. I giveaway over $200 in blasters and accessories each month! Thanks
@@GelBallBlasterMaster this old guy is subscribed 🤠
b
I have Anstoy mini ak 10$ blaster. Can i grow beads all night, wont they stuck in the blaster if they get at mazimum size. And other question is i am using excessive water, will it affect the growth or strength of orbeez? And Last Question is i grow my orbeez in a little bit hot water in which i can dip my hand without being burnt to grow them faster, is this good or not, pls reply my all 3 questions thanks.
no matter what, they should never grow past 7-8mm - too much water is not possible, just drain them out. Hot water makes no difference in my experience. Just use tap water first. if for some reason they don't grow properly, then try bottled or distilled water (your tap/well water may have chemicals/minerals that interact). A cheap top loader like you have actually is the most forgiving about gel ball size. You should never have issues. Subscribe and participate in my monthly YT contests so you can win some good gel blasters! (over $200 in custom blasters and accessories given away every month)
In storing the unused gel balls what is the typical temp. to maintain its optimum size?
I just store in airtight containers and I try not to ever make a huge surplus.
Is it possible to leave them in water for too long? If so how will it effect the ammo
Not really. I guess if you did for weeks it might soften them too much
Do you put them in the refrigerator?
No, just store in airtight containers, max of two weeks
@@GelBallBlasterMaster Can you store it in a ziploc bag?
@@ezlidaaa sure. Anything air tight
I used tap water and left them overnight and they are still too small would you recomend I strain the water and use bottled water ?
Yes. Or distilled
In have a Splat R ball bladter the SRB400.
Will those type of beads grow to much or will grow to its maximum potencial?
Thanks for this guide as well. Its so confusing on how I should grow these. Some say 2 hours to grow some say 8 hours or even over night?
Wtf is going on😮
Anywhere from about 3 hours to overnight should be fine for most standard gel balls. They stop growing at 7-8mm and that range is fine for SRB400. Some people "control grow" higher end beads for higher end blasters because they have narrower inner barrels
@@GelBallBlasterMaster Thanks
@@marcostamanisjuarez670 good luck! Make sure you are participating in the current monthly contest. The video on my channel main page explains it all
no don't worry, if you leave it in the water it will continue to absorb it until it becomes bigger than you
@@gabrielemanu8908 😂
Hi, is it possible for you to do an experiment with gel beads that you have? I am curious about how much weight they can lift while they are expanding.
Not really sure how you would want me to setup that
Do you use hot water or cold water?
I use cold tap water in most cases. You may need to use distilled or bottled water if they don’t grow properly with your tap water
After u are done draining them do u put it in the refrigerator?
You can. Personally, I don’t think it matters if the container is airtight
@@GelBallBlasterMaster can I leave water in the container?
@@darrengobrazy7929 you can. But I wouldn’t leave them in water for too long. I always drain them. You can always add water again later if you feel the gels need to refresh
@@GelBallBlasterMaster ok last question I’m new to this I am sorry my bad but I just wanted to ask if a Chinese lid and black bottom would work?
@@darrengobrazy7929 I don’t know what that means
I let mine soak from 8pm until 2pm the next day and they stopped growing about half way big. We tried them in my brothers gun and it jammed the gun now it’s broke. Does bottled water or distilled water work better?
Bottled or distilled water can be better if your tap water doesn't work. Your brothers gun may be jammed, it is highly unlikely that it broke
@@GelBallBlasterMaster how do you un jam it? We can’t get it out…
Also I used bottled water for three more batches and once again it’s been 6 hours and these stupid ass balls get to the midway point then stop growing…what is happening?
@@GelBallBlasterMaster you think I might be using too much water? Is that even a thing?
@@peterparker9214 I don’t know. I have never seen that happen. You are sure you are using enough water? What type of blaster does your brother have?
@@peterparker9214 nope
You are a better ball handler than Larry Bird!
Thanks! That good ol boy from French Lick sure could ball
what happened if gell ball sit too long in the water?
Typically nothing will happen. Just drain them and use them
@@GelBallBlasterMaster my whole life was a lie I thought the gel ball will be bad
So what happens after 2 weeks?
Eventually they will just shred/break when using
What temperature water should i use
should not make a difference. If for some reason they won't grow right with your tap water, then you can try bottled or distilled water
@@GelBallBlasterMaster i think i mightve left it in the water for too long because now theyre not big enough
@@Nothing-wf8wc no. That won’t happen. If they did not grow properly, try again but use bottled or distilled water
Why is it my orbeez is not growing i soak it overnight when look its small its about 4 to 5 mm...
Try distilled or bottled water
I bought a gell blaster but it dont shoot with the gells that came with it so remember to change the gellets before using it
That can happen but it is rare.
@@GelBallBlasterMaster happend to my friend also
@@Olilar397 it can happen. What blaster?
@@GelBallBlasterMaster Gell blaster surge
@@Olilar397 interesting. Not too many problems with their gels but that is not a great blaster for modifying so I have only had a couple
Mine are always too smalll😢
I use a lot of water
How long? Try bottled or distilled water
is it possible that the excess gel ball to put back on the container with water and stay there for a week or more?
Yes. You can store excess gels in air tight containers for about 2 weeks. Most gels should not be stored in water. I have only seen a couple that require that.
My splatter balls aren’t growing. How do they grow?
Are you following the directions? If you are, then try bottled water or distilled water. Some places have chemicals/minerals in the water that mess with the growing process
@@GelBallBlasterMaster what water should I put it in I got it yesterday it’s kinda making me annoyed
@@oompaloompa3482 I use tap water, but some people need to use bottled or distilled water. It depends on the chemicals/minerals in your water
You should do more tutorials sir 👉💯🫶🏆🏆
There are tons. What are you looking for specifically
I thought the gel balls won't grow bigger than 7-8mm no matter how many hours you soaked them in water? So it's not really that hard to grow the gel balls.
Agree
I’m using bottled water I left it overnight and there still about 5mm they’re supposed to be 7.5mm
Was there water left over? Did you use enough water? Are these really cheap gels that came with a cheap blaster?
i have splat r ball gels
@@perfy4868 those r decent gels so I can’t say for sure. Did you initially try tap water? Did you have water left over with the gels? Do you have the gels in a container that restricts their growth?
@@GelBallBlasterMaster I have them in the same container as you and I waited overnight I had water leftover when I tried tap water
@@perfy4868 what about when you used bottled?
There’s little fragments stuck in my magazine, what should I do? Do I wait or what
It is best to try to get them out right away
If I soak them in old hot dog water will they smell like hot dog water so then I will be shooting my enemies with solid hot dog water?
They will smell
The only way h
??
You keep saying liter of water, are you not using a 16.9 FL OZ bottle though?
I believe it is 16.9. But don’t worry about exact ratios, just make sure to use extra water
@GelBallBlasterMaster Thank you for the advice. 4 hours to go before test time.
I see you are doing this with water, but, just a a hypothetical, what is stopping someone from using their own urine to make a much more TH-cam-prank-worthy type of gel blaster?
You can try. Not sure how the gel beads would react. Likely they would not grow properly but who knows
@@GelBallBlasterMaster hmm, what inside of urine do you think would effect it negatively? The makeup of it is pretty identical to water no
@@potcha different minerals/chemicals can affect the growth. This is why some people need to use bottles or distilled water.
@@GelBallBlasterMaster interesting, I’ll let you know the results of the experiments
@@potcha just know someone may get violent if they figure out you shoot them with piss. I would not advise it
The balls turned out too beig
What kind? Too big for what blaster? Are you using 7-8mm gels?
I think so
@@Nothing-wf8wc Thats pretty important to know. Make sure you are using orbeez that grow way bigger. 7-8mm gels won't grow bigger than 8mm. Cheaper blasters should have no issue with those. Better blasters need better gels and can be more size specific (need 7.5mm or 7.3 growth, etc)
I soaked the balls and there still small and wet they won't shoot out the gun
How long did you soak them? If you gave them at least 4 hours and they didn’t grow right then you need to try distilled water or bottled water
@@GelBallBlasterMaster I thought more then four hours but ok and I used sink water I'm letting it sit for another four hours if they don't grow I'll try bottled water
@@kaysworld111 good idea