I'll tell ya, to this day when any of my buddies are having trouble with clutch engagement or slipping after installing a new cable.. I refer them to this video. makes it so easy for inexperienced diy'ers to understand.
You prolly dont care at all but does someone know a tool to get back into an instagram account?? I was dumb lost my account password. I would appreciate any assistance you can offer me.
@Graham Caspian i really appreciate your reply. I found the site through google and I'm in the hacking process now. I see it takes a while so I will reply here later with my results.
took my clutch apart yesterday, checked and changed worn parts, mounted everything back on. then the clutch cover.what a bit*ch to mount, almost lost it. then those markings.. way off alignment as the usermanual says and i had no clue how to adjust this. spent at least 2 hours. no way, jose. searched the internet for hours until i found your vid. today, took everything apart, and adjusted it like in your vid and everything works again! let me know when you are in austria, first beer is on me ^^.
OMG Thank you. This vid helped me out today. Had to replace the cover and had the rod where it was supposed to go but it didn't feel like it was grabbing like it should. Watched this video and within 5 minutes I had it fixed. Thank you!
On my 07 I could have sworn that dot was to the left but everyone told me it had to be lined up with that arrow I saw another video of a guy he just took the arm off slide the case on and lined it up with the arrow
2006 r1 i got it lined up on the dot like yours but when using a crescent wrench i cant turn it like how u did. I thought the adjustment or turn/freeplay ends thefe
99 yzf r6 franken bikes been parked sadly way too long....bike will start, idle {N}, but soon as i try to kick into gear she dies, being yzf its got alot of wire bypass worth mentioning (clutch,kickstand,signals, lights ect.) i know some faults here can cause an electric shut down as a safety measure, but prior to inspecting all of the harness i took out clutchbasket and put it back in after hearing "defintly jsut stuck clutch plates' - wrong !due to storage)
I can't get any pressure after I put in a new clutch cable and checked my clutch basket I have no tension even with the old cable it's like nothing's there my stuff lines up with yours please help 2001 R6
Hello , I’m new at this so bard with me please . I have a 2007 R1 runs great starts right up but I stopped & hosed it off at car wash & rode half mile & it stopped changing gear or going into gear & want some help trying to fix it. I saw this video & wanted to know if it could be my clutch . Need some help fellow riders
I just changed clutch on my 06 r1, everything seen good but its extremely hard to pull the cable, and when I put it on gear it jerks and dies right away, so I'm guessing clutch is not engaging any tips? Thanks
So my cable is loss and it won’t grab so I don’t know what’s wrong with it like it wound grab hard enough can you please help me or show me something that would help
Hey can you help me? My bike when I put in first gear my bike won’t move at all, so I opened my clutch and saw my plates were broken and I bought new clutch and still won’t move. Any tips or ideas man!!?
I have a 2003 yamaha r6 and after I changed the clutch kit now when I hold the clutch lever and put it to 1st gear the bike's back tire turns and speed goes go 12 km/h. I installed the ebc srk clutch kit. Any idea? Thanks
I've tried doing this for 3+ hours Lol. I don't know what could be the problem. I installed my new clutch set. and yes, they are in order and in the right way. but my clutch is not engaging at all. when I start bike in neutral and pull clutch in to put it in first gear it cuts right off.
Hey bro, just a quick question - no matter what I try I can't aline the dot- every time I have it much before or much after the arrow. Any suggestions would be greatly appreciated. Thanks.
Unfortunately not, but I changed only the friction plates ( some racing version ) and left the old pressure plates so the overall thickness of all plates combined might be wrong, I mean in my case I should replace the pressure plates too maybe that is the problem.
I've got r1 1998 , been standing for four months got on it pulled in clutch into 1st an it's like u hav no clutch but all the resistance is in the lever could it dry ?
I have a Yamaha r6 2008 I’ve installed a new clutch, there was no markings or any signs of any size difference in the friction plates or clutch plates...however when I connect the clutch cover and align all the dot and triangle up it’s freely moving but when I tighten the bolts up the clutch arm sticks...do u know why this may be at all..? Thank you for your time
My 2002 wont shift pass 3rd on some occasion I change the shift rod It still happens sometimes if i pull shift rod with my hand i can shift fine but when i mount it were it goes I have that problem Due to the fact that pulling with my hand it shifts fine is not the transmision right so what am i mounting wrong Email suggestions to jjuan129@yahoo.com TY
I'll tell ya, to this day when any of my buddies are having trouble with clutch engagement or slipping after installing a new cable.. I refer them to this video. makes it so easy for inexperienced diy'ers to understand.
You prolly dont care at all but does someone know a tool to get back into an instagram account??
I was dumb lost my account password. I would appreciate any assistance you can offer me.
@Camden Mario instablaster =)
@Graham Caspian i really appreciate your reply. I found the site through google and I'm in the hacking process now.
I see it takes a while so I will reply here later with my results.
@Graham Caspian It did the trick and I now got access to my account again. I'm so happy:D
Thank you so much you really help me out !
@Camden Mario glad I could help :)
Very useful little video, helped my with my first gen R1. Keep up the good work
took my clutch apart yesterday, checked and changed worn parts, mounted everything back on. then the clutch cover.what a bit*ch to mount, almost lost it. then those markings.. way off alignment as the usermanual says and i had no clue how to adjust this. spent at least 2 hours. no way, jose. searched the internet for hours until i found your vid. today, took everything apart, and adjusted it like in your vid and everything works again! let me know when you are in austria, first beer is on me ^^.
tunedvideo87 hey man i need some help with the clutch or it could be the cable adjustment if you can get back to me thatd be great
Second beer on me thanx
OMG Thank you. This vid helped me out today. Had to replace the cover and had the rod where it was supposed to go but it didn't feel like it was grabbing like it should. Watched this video and within 5 minutes I had it fixed. Thank you!
Sending a link to this to someone again. Great useful short video. Thanks, man.
On my 07 I could have sworn that dot was to the left but everyone told me it had to be lined up with that arrow I saw another video of a guy he just took the arm off slide the case on and lined it up with the arrow
+1 for using a magnet on a stick through the oil fill hole. Took about 4 hours before trying that.
2006 r1 i got it lined up on the dot like yours but when using a crescent wrench i cant turn it like how u did. I thought the adjustment or turn/freeplay ends thefe
Where does the two bolts on the clutch cable need to be so it don't move back and forth
could this be the cause of gears sticking? like it will stay in one gear and sometimes it won't upshift or downshift
99 yzf r6 franken bikes been parked sadly way too long....bike will start, idle {N}, but soon as i try to kick into gear she dies, being yzf its got alot of wire bypass worth mentioning (clutch,kickstand,signals, lights ect.) i know some faults here can cause an electric shut down as a safety measure, but prior to inspecting all of the harness i took out clutchbasket and put it back in after hearing "defintly jsut stuck clutch plates' - wrong !due to storage)
I can't get any pressure after I put in a new clutch cable and checked my clutch basket I have no tension even with the old cable it's like nothing's there my stuff lines up with yours please help 2001 R6
Any luck same problem
how do you replace that silver spring? the one on my r6 is not strong enough anymore to retract the cable.
The spring is bolt in to that whole cover just got one for my r6
Hello , I’m new at this so bard with me please . I have a 2007 R1 runs great starts right up but I stopped & hosed it off at car wash & rode half mile & it stopped changing gear or going into gear & want some help trying to fix it. I saw this video & wanted to know if it could be my clutch . Need some help fellow riders
got R6 motor goes in gear but won't pull it's in a gokart frame any ideas what it could be? thanks for any help
yo dude, my 2nd gen r6 wont disengage the clutch when i pull the lever, i opened up the clutch cover and could not find any visual damage, any ideas ?
Did you find the problem?
@@mikejimenez4736 find the issue?
@@TheFastPackI need to know as well😂
I just changed clutch on my 06 r1, everything seen good but its extremely hard to pull the cable, and when I put it on gear it jerks and dies right away, so I'm guessing clutch is not engaging any tips? Thanks
So my cable is loss and it won’t grab so I don’t know what’s wrong with it like it wound grab hard enough can you please help me or show me something that would help
What is that metal piece called? The one that takes space instead of drake sliders..?
Hey can you help me? My bike when I put in first gear my bike won’t move at all, so I opened my clutch and saw my plates were broken and I bought new clutch and still won’t move. Any tips or ideas man!!?
I’m having some clutch issues need little advice if you don’t mind
What is that silver spring called , mine is worn out
Don't you need to replace the clutch cover gasket if you do this?
Normally, yes
In the clutch which of the washers go on first the curved one or the flat one?
Sir .my arm doesn't feel like it's engaging anything. It goes front to back with no resistance. Can u help?
I have the same problem, have you fixed yours
What year is your R6
I have a 2003 yamaha r6 and after I changed the clutch kit now when I hold the clutch lever and put it to 1st gear the bike's back tire turns and speed goes go 12 km/h. I installed the ebc srk clutch kit. Any idea? Thanks
Figure it out?
Great info. Thanks for sharing this awesome tip.
Is that on all bike will it work on Kawasaki zr7 ???
I've tried doing this for 3+ hours Lol. I don't know what could be the problem. I installed my new clutch set. and yes, they are in order and in the right way. but my clutch is not engaging at all. when I start bike in neutral and pull clutch in to put it in first gear it cuts right off.
Was the kickstand still down?
Why isn't the clutch going back ? Is it something from the inside is wrong what can I do ??
Hector Lopez spring
Hey bro, just a quick question - no matter what I try I can't aline the dot- every time I have it much before or much after the arrow. Any suggestions would be greatly appreciated. Thanks.
Ivan Kotsev same with me have you fix it yet ?
Unfortunately not, but I changed only the friction plates ( some racing version ) and left the old pressure plates so the overall thickness of all plates combined might be wrong, I mean in my case I should replace the pressure plates too maybe that is the problem.
Ivan Kotsev I changed mines but replace it with oem ...well it works fine I'll just leave it
Nice vid man! Do U live in NY??
Does this help with the clutch not disengaging ...my tire spins when I put the bike in gear while pulling in the clutch
Do you remember how you fixed this? Same issue here just replaced the clutch
I've got r1 1998 , been standing for four months got on it pulled in clutch into 1st an it's like u hav no clutch but all the resistance is in the lever could it dry ?
Wayne Ashdown did you figure that out im have the same issue
Do I have to drain the oil before I do this or does it not matter?
Yes. Drain oil.
Did you have to drain oil to do that procedure?
That’s what I was wondering, I swear that basket is soaked
this is the issue i have -replaced my r6 clutch put cable is loose -
BL Riders I have this problem now I just replace all my clutch plates and I put everything back on but my clutch cable is loose
@@josetapia3459 find the issue?
Great job ! Keep it up!
I have a Yamaha r6 2008 I’ve installed a new clutch, there was no markings or any signs of any size difference in the friction plates or clutch plates...however when I connect the clutch cover and align all the dot and triangle up it’s freely moving but when I tighten the bolts up the clutch arm sticks...do u know why this may be at all..? Thank you for your time
Mine doesnt even click doesnt turn fml
well this video work for a 97 fzr600
Tnks I'm adjust my 08 r6 feels better
My 2002 wont shift pass 3rd on some occasion I change the shift rod It still happens sometimes if i pull shift rod with my hand i can shift fine but when i mount it were it goes I have that problem Due to the fact that pulling with my hand it shifts fine is not the transmision right so what am i mounting wrong Email suggestions to jjuan129@yahoo.com TY
Did you have to drain oil to do that procedure?
Yes. Drain oil first.