Mate. This is the best video. Very well explained with a lot of patience. I’m a mechanic about to do this and thought I’d have a quick look for a couple of ‘unexpected’ bits and pieces. I watched the whole video just for the commentary 😅😅❤
Still going very slowly with mine as I'm doing my faux apprenticeship.There's lots of extra things along the way and other stuff on the long list of things to give the work horse some love.Nothing to do with this video. I'm someone who needs to understand why. What can I say. It's a blessing if you're into that sort of thing. There's several things that happen out of sight. No drama's if you take the time to feel around and figure out what the engineers first came up with. Most will be good. Mind you, not for the faint-hearted if you can't add a few needed tools along the way.
I find that local mechanic shops do a better job than major brand shops like Toyota/Nissan. I guess it all comes down to the fact that local shops take pride in their work, and it really shows. That's why I have never had the nerve to take my Toyota to a Toyota Dealer. It's always had its service done by a local mechanic who has over 50 years of experience
Man I love your videos please do make a video on how to put the codes on the injectors and when to put them before putting them into the engine or after starting the engine with the new injectors
I have a 2014 hilux. Was worried my injectors were on the blink. 199,650km Injectors measured in store, at 0.3 Thinking of donating it to the Smithsonian museum 😂
I have ordered my new injectors direct from Denso UK, I have a 2014 Hilux from new with origional injectors compensation code starting with 1A, should the new injectors also start with 1A or is the code unrelated to injector type?
G’day Anthony I have a lack of power on my 2005 kun26 hilux changed turbo every thing is clean were I checked even checked oil pick up am in far north coast nsw what else could I check cheers love your seems to have no boast cheers rod
Hi mate. I have a snapped injector solenoid on number 4 injector. My car is a 2008 kun16 2WD. I see that you can buy the solenoids separately and change them? much cheaper than changing the injector. Is this possible? if so, would you have a part number? And any tips for doing it. Cheers.
Quick question, replaced the fuel filter on my n70 and forgot to prime it afterwards. It ran for 10seconds then conked out, would this have done any damage specifically to the injectors?
Hey mate just did my injectors on 2011 Hilux with this video when I started my ute and has throw code throttle/pedal position sensor/switch A circuit low, any ideas cheers
![เป็นไปได้ไหม - WanMai [Performance Video]](http://i.ytimg.com/vi/Eh5hItD4Mr0/mqdefault.jpg)
Thanks mate. Loved the video and was glued to my screen for the whole time. Better than watching a movie on a Saturday night.
Mate. This is the best video. Very well explained with a lot of patience. I’m a mechanic about to do this and thought I’d have a quick look for a couple of ‘unexpected’ bits and pieces. I watched the whole video just for the commentary 😅😅❤
Still going very slowly with mine as I'm doing my faux apprenticeship.There's lots of extra things along the way and other stuff on the long list of things to give the work horse some love.Nothing to do with this video.
I'm someone who needs to understand why. What can I say. It's a blessing if you're into that sort of thing.
There's several things that happen out of sight. No drama's if you take the time to feel around and figure out what the engineers first came up with. Most will be good. Mind you, not for the faint-hearted if you can't add a few needed tools along the way.
Planning to do mine this coming weekend. Just clicked over 400k kms. Euro 3 too! Perfect timing thanks Anth
How did your 400k work horse go? 11 months should've been enough for a run-in.
Ron here great video learnt some things
I find that local mechanic shops do a better job than major brand shops like Toyota/Nissan. I guess it all comes down to the fact that local shops take pride in their work, and it really shows. That's why I have never had the nerve to take my Toyota to a Toyota Dealer. It's always had its service done by a local mechanic who has over 50 years of experience
Very clear, quality picture…bewdifull.
Mine same year. 450,000 KLM’s serviced every 10,000. Fantastic vehicle . From new
Really appreciate your sharing of knowledge and correct ways of doing things 👌
Yep, better than watching a movie, if ya know what I mean.
Man I love your videos please do make a video on how to put the codes on the injectors and when to put them before putting them into the engine or after starting the engine with the new injectors
great video, very informative and instructions are easy to follow
Very awesome mate .. great work your doing there 👍🇦🇺🍺
This was very helpful. Thanks mate.
Cleanliness is next to Godliness
Beautiful badabim bada boom, thanks for this extraordinary video 👏👏👏
I have a 2014 hilux.
Was worried my injectors were on the blink.
199,650km
Injectors measured in store, at 0.3
Thinking of donating it to the Smithsonian museum 😂
Have your injector seats leaked yet?
I have ordered my new injectors direct from Denso UK, I have a 2014 Hilux from new with origional injectors compensation code starting with 1A, should the new injectors also start with 1A or is the code unrelated to injector type?
@@lescampbell6745how much were they
Con the Fruiterer from The Comedy Company.
Great video 👍🤙🍻
great video, talked my ear off tho😆
G’day Anthony I have a lack of power on my 2005 kun26 hilux changed turbo every thing is clean were I checked even checked oil pick up am in far north coast nsw what else could I check cheers love your seems to have no boast cheers rod
Hi mate. I have a snapped injector solenoid on number 4 injector. My car is a 2008 kun16 2WD. I see that you can buy the solenoids separately and change them? much cheaper than changing the injector. Is this possible? if so, would you have a part number? And any tips for doing it. Cheers.
I’m not sure, but I know Nickel is used as an anti corrosion protection to swages for marine use, so I think the coating over copper is just nickel.
Do i need to reset ecu when replacing injectors?
Any recommendation of lube to lube the seals as well as silicon for the half moon near the camshaft?
Quick question, replaced the fuel filter on my n70 and forgot to prime it afterwards. It ran for 10seconds then conked out, would this have done any damage specifically to the injectors?
Would it not have been an idea to do an engine flush before starting this job?
What do you mean by noting down the conversation for the injectors?
Hey mate just did my injectors on 2011 Hilux with this video when I started my ute and has throw code throttle/pedal position sensor/switch A circuit low, any ideas cheers
Can injectiors be reconditioned?
Q, the socket to undo the bottom nut on the injector line what size is it?
Any recommendations for mechanics in/around Brisbane to work on 1kd engines that know what they're doing? Cheers
Hey mate, I have a 2008 Hilux, is this the same as that?
I would love a list of torque settings!!!!
Whats your email and I can send you a manual aswell as the torque specs anthony use
Alguien sabe el torque de las grapas de los inyectores
Valve plate and nozzle no ??