That's a Emei 185 china engine, we have a lot engine here in the phimippines, it is powerful engine and also heavy engine, good for farming. I suggest that you should change the liner, piston, rings, noozle tip, plunger, connecting cap bearing so, it seems a brandnew.
No tiene torque ni reglage de válvulas pero se entiende que allí faltan herramientas pero mientras funcione eso es lo que importa, esta bien el trabajo ojalá estuviera yo así cada día restaurando motores de todo tipo
I realize you guys are working with the minimum of tools, but you should be able to measure your tolerances on your crank journals and piston sleeve to determine the wear, so that you can fit the correct bearings for the crank and rings for the pistons. If the bore has too much wear, it has to be bored out to accommodate a new piston. The same with the crank. The surfaces where other parts have to be fitted should be taped off when spray painting, to prevent the paint causing leakage.
Є кілька способів вставити компресійне кільце в трубку. У цьому відео про відновлення я за допомогою мотузки затягував компресійні кільця. У наступному відео я використав інший спосіб зробити це. Будь ласка, перегляньте наступне відео на моєму каналі. Дуже дякую
you probably dont give a shit but does someone know a way to get back into an instagram account? I was dumb lost the password. I would appreciate any help you can offer me.
@Ramon Bradley Thanks so much for your reply. I got to the site thru google and im waiting for the hacking stuff now. I see it takes a while so I will reply here later with my results.
What are you talking about? They Unscrew the bolts with gas keys! They do not have a wrench, they wash with a hose and brush, automatic washing, sandblasting? No you haven't! Painting with the spray, the height of technology! And the fact that it is better to heat the housing before pressing the bearings, this is generally nano technology! And judging by the inserts the engine almost did not work! Вы о чём!? Они болты откручивают газовыми ключами! У них гайкавёрта нет, моют из шланга и щеткой, автоматическая мойка, пескоструй? Нет не слышали! Покраска с баллончика, верх технологий! А то что корпус перед запрессовкой подшипников лучше нагреть, это вообще нано технологии! Да и судя по вкладышам двигатель почти не работал!
Unfortunately they are just making it look good and not rebuilding the engine itself, cleaning the piston, the head, valves, valve lapping, piston rig gap, piston to cylinder clearance etc...
@@skibiditoilet_ideas please don't get me wrong, I like you chanel a lot, but from other restorations this ones it is kind of in a hurry...only clean and paint.
I admit with the limited tools you use I’m impressed with your ability but at the same time I wonder why you don’t invest in some better tooling. As you go?
Totally incomplete restoration You have shown following things Piston block assembly cleaning , boaring etc. Silencer cleaning, The parts you replaced Complete colouring The color painting appears quite shabby No ball bearings cleaning or replacement Diesel tank cleaning Any welding work
It’s not even an old engine to start with most of the dirt was still on the timing gears and all the old bearing was reused. Valve was not cleaned or lapped in and piston was not cleaned. If you rebuilt an engine in the U.K. like that you would be fired. I also failed to see any use of a torque wrench in any part of the rebuild and when they started it up you could hear the worn out bearings rumbling away won’t be long before it’s broken
Myeimopomyeimopmemyeimopmmyeimopme is a great way to get a good night's sleep and a good night's sleep and a good night's sleep 3rd night sleep and a good
majster pipla,jaký odborník,takové nářadí.
Now that's called working with what you have...That string used for a ring compressor...Brilliant👍.
yes thank you. after recovery our machine was working fine
WCVhat a great effort. The engine has certainly undergone a huge transformation. I enjoy your work and efforts.
Thank you very much. I will try more.
Hay lắm bác
Toàn thấy còm tiếng anh thôi
Cám ơn nhé.
💪🏻👍😁 like 👍 Aki 👈🤗😁
Excellent work....but lot of pollution...be aware please
Old is gold.good.👍👍👍
Thank you
Awesome work man.... Cheers from INDIA 🇮🇳🙏
thanks yoy very much
From the beginning it does not look as bad as some others you have done but I know it’s missing a few things can’t wait to see how you deal with it.
Schön restauriert, und läuft wieder . Gefällt mir gut 👍👍👍
Ja. Danke fürs Zuschauen.
That's a Emei 185 china engine, we have a lot engine here in the phimippines, it is powerful engine and also heavy engine, good for farming. I suggest that you should change the liner, piston, rings, noozle tip, plunger, connecting cap bearing so, it seems a brandnew.
We have replaced the broken part. Anything that works well, we reuse it. Thank you very much
GREAT JOB MY FRIEND KEEP UP THE GREAT JOB.
thanks you
No tiene torque ni reglage de válvulas pero se entiende que allí faltan herramientas pero mientras funcione eso es lo que importa, esta bien el trabajo ojalá estuviera yo así cada día restaurando motores de todo tipo
I'm in Amarillo Texas and you guys are phenomenal when it comes to repair an engine
Thank you for watching our video. Please stay tuned for our next videos
They could be a LOT better
AWSOME job 👍 good
Beautiful repair!
thanks you
New Bearings
yes. thank you
These Chinese diesel engines are often better hopper cooled or cooled with an external radiator rather than using the original internal radiator.
This is just cleaning of engine... You should change piston rings main bearings and overhaul injection system
Great job keep on fixing them all.
Thank you for your encouragement
groovy
I love this videos, the process is satisfactory and see before and after is another feeling
Thank you for your support
Wow...that thing held a LOT of oil!!😄
Yes . The engine has not been used for a long time, so the oil is condensed a lot. Thank you for watching
Parabéns 👏👏👏🇧🇷🇧🇷
O NOSSO CORPO TAMBEM PREÇISA DE UM RESTORADOR DE PEÇAS UMANAS
Mang đậm chất thợ vườn Việt Nam
Mình là thợ vườn mà. Đang học tập thôi nếu có chỗ nào làm chưa tốt bạn góp ý cho mình nhé. Cám ơn bạn
I realize you guys are working with the minimum of tools, but you should be able to measure your tolerances on your crank journals and piston sleeve to determine the wear, so that you can fit the correct bearings for the crank and rings for the pistons. If the bore has too much wear, it has to be bored out to accommodate a new piston. The same with the crank. The surfaces where other parts have to be fitted should be taped off when spray painting, to prevent the paint causing leakage.
Ion think third world countries are capable of this, these guys r mad poor
Thank you very much for your very detailed comments. I'm sure you're also a good engine repairman. Because I see you know very well motives.
Watch his other videos. You'll see he pays attention to worn parts and tolerances.
I absolutely love this clip but the drawback is too many advertisements spoils the interest in watching good clips l almost switched to another clip
Thank you for your comments.
Very good
Thank you
Thoughts it was a Caterpillar D10 dozer engine video! But awesome restoration 👍
This is a D10 wind-cooled diesel engine. It is used in field plows. Thank you for watching our restoration videov
@@skibiditoilet_ideas very interesting video! Thanks for uploading! Enjoyed it a lot👍
UA. Молодці, привели в естетичний вигляд мотор.
Вперше бачу, щоб компресійні кільця мотузкою стягували для інсталяції в гільзу. ;)
Є кілька способів вставити компресійне кільце в трубку. У цьому відео про відновлення я за допомогою мотузки затягував компресійні кільця. У наступному відео я використав інший спосіб зробити це. Будь ласка, перегляньте наступне відео на моєму каналі. Дуже дякую
Súper buen vídeo gravias
muchas gracias
Those hard right angles in the exhaust pipe hurts my sensibilities.
Cool
Shame about the patina but at least she runs nice.
This is EM 185
yes
@Restore and repair all: That engine came out beautifully. Nice work, and thank you for sharing. :-)
Thank you for the compliment. I will share many more videos, please follow them
@@skibiditoilet_ideas You're welcome. OK, and I'm looking forward to future videos from you.. :-)
you probably dont give a shit but does someone know a way to get back into an instagram account?
I was dumb lost the password. I would appreciate any help you can offer me.
@Kian Devin instablaster =)
@Ramon Bradley Thanks so much for your reply. I got to the site thru google and im waiting for the hacking stuff now.
I see it takes a while so I will reply here later with my results.
Anh trài đang ky
cám ơn nhe
Hello! I'am China😶
Hi
You guys are corona virus don't watch [ COVID-19] 😷😷😷
Man I love one of them suckers man I treat you my little two cylinder yamar liquid cold engine for one of those
Thank you for your comment
Hey @radoslav.vitez, what is this engine? It looks like a R175 or so, but with a counterbalance?
good stuff
thanks
phải ở gần nhờ ông làm dùm cái Yanmar F8 cổ
Ông ở đâu.
ở vĩnh long
Uh xa quá.
còn ông chắc miền ngoài hả? hay làm 1 clip đi xa phục hồi máy cổ đi
Uh tôi ngoài hải phòng. Chưa có điều kiện làm video như thế được. Cám ơn ông đã xem nhé.
wouldnt trust any thing you have refurbed no new bearings or seals
Yes, thank you for your comments
Где реставрация? Помыли, покрасили и собрали?
What are you talking about? They Unscrew the bolts with gas keys! They do not have a wrench, they wash with a hose and brush, automatic washing, sandblasting? No you haven't! Painting with the spray, the height of technology! And the fact that it is better to heat the housing before pressing the bearings, this is generally nano technology! And judging by the inserts the engine almost did not work!
Вы о чём!? Они болты откручивают газовыми ключами! У них гайкавёрта нет, моют из шланга и щеткой, автоматическая мойка, пескоструй? Нет не слышали! Покраска с баллончика, верх технологий! А то что корпус перед запрессовкой подшипников лучше нагреть, это вообще нано технологии! Да и судя по вкладышам двигатель почти не работал!
Ето не реставрация а фигня какая то, разобрал и собрал! Ни одной детали ЦПГ не измерялось, не менялось! Фази грм на глаз виставил или как?😂
Дякую за вашу думку. На наступному відео ми спробуємо відновитись краще. Наш двигун добре попрацював після відновлення.
@@skibiditoilet_ideas ОК
Using pipe wrench on a nut...
Ok. Thanks you
Làm sơ sài ..gọi phục hồi ..gọi làm cho nó nổ là được
Unfortunately they are just making it look good and not rebuilding the engine itself, cleaning the piston, the head, valves, valve lapping, piston rig gap, piston to cylinder clearance etc...
I cleaned it all up and the machine was working fine
@@skibiditoilet_ideas please don't get me wrong, I like you chanel a lot, but from other restorations this ones it is kind of in a hurry...only clean and paint.
Chỉ có ở Việt Nam thôi
Vâng cám ơn ban đã xem
Do they not make ratchets where ever y'all are.
I don't understand what you mean
@@skibiditoilet_ideas just that you never see a ratchet in your videos just a breaker bar.
Plis radiator clean up so rusty
I admit with the limited tools you use I’m impressed with your ability but at the same time I wonder why you don’t invest in some better tooling. As you go?
What about if instead doing that waste of water, clean the parts using gasoline or any grease remover.
We used gasoline to clean greasy parts.
Paint bad
We use pre-mixed spray paint
👍👍👏👏👏
Có tiếng diều sáo
đúng rồi bạn. may chưa ai đòi bản quyền tiếng sáo diều
Totally incomplete restoration
You have shown following things
Piston block assembly cleaning , boaring etc.
Silencer cleaning,
The parts you replaced
Complete colouring
The color painting appears quite shabby
No ball bearings cleaning or replacement
Diesel tank cleaning
Any welding work
It’s not even an old engine to start with most of the dirt was still on the timing gears and all the old bearing was reused. Valve was not cleaned or lapped in and piston was not cleaned. If you rebuilt an engine in the U.K. like that you would be fired. I also failed to see any use of a torque wrench in any part of the rebuild and when they started it up you could hear the worn out bearings rumbling away won’t be long before it’s broken
15:25 에 붓는 액체가 뭔가요?
그것은 가솔린이다
I would love to find one of these engines, but I think they are illegal in the U.S. for some reason.
I don't understand why this motive in the United States is illegal. Can you explain it for me?
@@skibiditoilet_ideas They are certainly not illegal here.
Лучше бы ты его не реставрировал, а отдал нормальному мастеру по реставрированию
For the love of god plz purchase a torque wrench and buy new bearings and pay attention to wear!!!
Thank you for the advice and I will try to follow yours in the following video
have the Vietnamese army's papyrus cone
"Wash me" restoration. Nothing interesting! BTW - dislike, cause oil waste goes to the ground.
Nothing intresting?So why did you watch the video then?Must be an environmentalist
@@andrewjowsey1333 Worse a hypocrite
hình như la tho không chuyen
Uh mình đang học việc thôi. Cám ơn bạn đã xem nhé
@@skibiditoilet_ideas chuc ban thanh cong
@@hoangnamphuonghang3763 cám ơn bạn
Mănuși ai dar scule nu nu ești meseriaș
Sunt un lucrător nou, am ceva greșit care să-mi dea sugestii
Реставрация это дрведение до идеала а тут нихуя не идеал старые болты подшипники и тд
Myeimopomyeimopmemyeimopmmyeimopme is a great way to get a good night's sleep and a good night's sleep and a good night's sleep 3rd night sleep and a good