$300 Custom 6s Brushless Traxxas (Part 4)
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2021
- Welcome to the traxxas build series, part 4! I'm doing a used rc car build from scratch and trying to go for a 6s traxxas rustler build from converting a traxxas nitro sport/rustler chassis.
Basically, I pick up a used rc car chassis, and try to turn it into a 6s BEAST. For this series, I chose a vintage nitro rustler from traxxas that I'll use as my chassis. In part 1, I showed you guys how I picked it up, and what I need to fix first before finding used rc car parts. What's cool about this build is that I'll basically be doing a nitro to electric rc conversion. My goal is to build a solid 6s traxxas rustler. In this part 4, I take it to the track.
-----------------
Don't forget to subscribe, click below!
/ @jacobusrc
---------------
Parts I Used:
Screws: amzn.to/3BenOXr
Upper Chassis Plate: amzn.to/3wlM1Zv
Front Axle: amzn.to/3xdlT2O
Bellcrank: amzn.to/3vmeIEi
6s ESC: amzn.to/3wpXvLi
6s Motor: amzn.to/2RQiEzk
My 3d Printer - amzn.to/35f0kTA
3d Printer Filament Used: amzn.to/35gf2JU
DHK RazR Wheels/Tires: Not Sold New Anymore
Traxxas Dyeable Nylon Wheels: amzn.to/3gR95bR
Schumacher Mini Pin Tires That Were On My Traxxas Wheels: amzn.to/2TQ0RsS
J Concepts Carvers: Bought Online On Ebay
Tekno Rear Driveshafts: amzn.to/2TUtl4p
Please note, some of these links are affiliate links, which pay me a small commission that goes back to the channel!
----------------
Most Watched Videos:
Cheap Brushless Motor and ESC: • $30 CHEAP Brushless Mo...
How To Remove Stripped Pinion Screw - • How To Remove: Strippe...
Nitro RC not Moving? Watch This!: • Nitro RC Wont Accelera...
---------------------------------------------
Stick around with me as I venture out and buy used RC Cars, rebuild them and have fun with them! Along my journey, I will be learning some RC Car tips and tricks and sharing them with you! Jacobus RC, where I buy, bash and build USED RC Cars.
#traxxas #rccars #traxxasrustler - บันเทิง
Hit that LIKE 🤘 button for the sweet track I found near me!! Will feature it more often in the future. PREVIOUS VIDEO: th-cam.com/video/U5RPRANd2QE/w-d-xo.html
Bro, you seem to have a lot of trouble with this. I had a few old nitro rustler chassis laying around and decided to convert one. Much, much simpler than your build. No 3D printed parts, $5 motor mount. $35 goolrc combo, some trimming of the top plate, drilled a few holes and she's been a beast! Maybe I'll make a video and go over a few things. Well anyways I do dig the content 🤟
It’s all about the journey for me my brotha, but yeah let me know if you got yours posted. Thanks for watching 💪🏽
My friend has the same car but it a rustler 2.5 and it has the same problem with the diff being like that. Also his tires wear unevenly on the right tire if your looking from back of the car.
Hmmmm I’ll have to check it out to see what’s going on, maybe check the forums too or just buy a new diff
@@JacobusRC I’ll see how you fix your problem because it’s basically the same problem!
6s is a lot it probably needs to be bigger
I don’t think the 3D print stuff will hold up
Yeah will need to revise some of the pieces for next time, runs good on pavement tho 👍🏽
Yo just saying if you body post broke you should go home and fix it cause the body is very important because the body protects the lectronics so they don't get dabree in them