Somebody needs to show Allen some love here. How about a sponsor or something. I see all these other YTers getting free shit. It's about time Allen did! He works his ass off to get what he's got. Anybody want to start a go fund me? Buddy if I had the money I'd ship you one! You'd deserve it!
Take one of the other ones and make a nurse tank that way you can double your volume of air and the compressor won't work as hard that's what I have and works great. Just a little idea
Allen !!!!! What's up??? Where have you been ??? You need to get on the stick.. Brother love your videos. We like any American can't get enough . Thank you Frank from montana..
Smokers and Grills are good Ideas! What about a couple of auxiliary tanks? have the GoodYear fill up the other 2 tanks with shutoff valves in between them...
Thanks for the advice brother it also refers to some life decisions like trying to make it work with an old girlfriend sometimes you just gotta let her go, god bless
Sir I am trying to brag. I have a Quincy Qt5 and have had it for quite some time. It has never let me down. I would recommend one that has a spin on filter. But these use to be around 2000$ or so. Single phase can’t go wrong. You might even be able to find a used one mine has a 80 gallon tank. I hate to say this but the Ingersoll rand don’t appear to be the same quality. I hope this helps.
Next time try to get a belt drive piston compressor. They last way longer and when they do fail you either replace the motor or the whole piston unit and you're back in action. Lowes, HD and HF all have them in 120v ~30 gallon units, though for as much as you're cutting and painting a 240v 60 gallon stationary would be justified.
I have the same problem. But I have figured out if I take that little check spring valve up top out it will start and run. But all the air is coming out of that passage I can hold it down to to the threads and get in warm while the compressor is running and then cut it off and screw that valve in and turn it back on and my will run like a champ all day. Until it cools off. Then you have to repeat that process.
Does it rain evertyday where you are? Seems like most of your videos show signs of recent rain. When I lived in south GA, I* could amost set my watch to the afternoon thunderstorms at 4:00. If the reed valves didn't fix it and the check valve is okay, then it's probably a cracked piston or rings. Seems like you've checked everything else.
Think outside the box! I bought a Ingersol Rand T30 with a 5hp 3 phase motor. offered for $800 as a two phase motor. got there and it was 230V 3 phase. looked up a 5 ph 2 phase motor. It was $300, so the guy took $500 for it. got home and found that I really needed a three phase rotary converter. found a 10 hp converter with a 15" Dewalt Commercial Radial Arm saw for $300 Dude offered me $300 for the saw, so I ended up with a beast of a compressor for $500! Love it.
I have 1 of those that just stopped working I think my pump has failed since it smells burnt. I have an 80 gallon compressor that needs a pump but I'm not driving 4 hours away to get it. Going to see if I can get the harbor freights working or buy another 1
I fully understand your misery I have an old speedaire belt dr paid 100dllars for it spent another 75 on gauges and a switch works like a dream its quiet and you can get parts at grainger if there's one near you don't mess with those funny brand compressor they're only grief any used american made compressor is better than a new one of those friend
With all due respect what don’t you just buy a good compressor? Like you did with your good welder and you’re good plasma cutter you have enough work so they won’t get paid quick enough
Those oil free compressors are made for home use and almost impossible to fix or get the right Chinese part I had one where the internal belt broke and ordered like 3 different belts nothing fit lol spend the extra 150 to 200 and get something that can be fixed
I hate to admit it but yer right! I hate sending the money but the time is better spent so Unless you know how to put the electric switch back together I'm cuttin bait n buyin a new compressor! What's out there not made in China?
Man I wish you would at least order a load of rock. I hate seeing you work in the mud all the time. Thanks for the videos
Somebody needs to show Allen some love here. How about a sponsor or something. I see all these other YTers getting free shit. It's about time Allen did! He works his ass off to get what he's got. Anybody want to start a go fund me?
Buddy if I had the money I'd ship you one! You'd deserve it!
Hey send me some if your that free with money.
Take one of the other ones and make a nurse tank that way you can double your volume of air and the compressor won't work as hard that's what I have and works great. Just a little idea
Allen turn the old tanks into smoker parts spend the money and get a Quincey 80 gallon compressor you will never regret it.Been here done all of that.
Steve is right you can never go wrong with a Quincy compressor
Quincey is nice also ingersol rand might be a little more affordable
I like the Champion compressors, I bought a used one made in 93, with the 80 gallon horizontal tank. Use it everyday.
Stay away from diaphragm compressors. Piston compressors last longer, faster recovery and easy to maintain
Too true -- tolerance for tinkering has a limit when something refuses to be fixed.
mine was doin same it ended up being the thermal switch $5 on amazon
Good quality tools pay for themselves over time, upfront cost is more, but over time works out better.
@MPM Welding Danish
@MPM Welding I like both Scottish and Irish Whiskey, cheers!
Allen !!!!! What's up??? Where have you been ??? You need to get on the stick.. Brother love your videos. We like any American can't get enough . Thank you Frank from montana..
Smokers and Grills are good Ideas! What about a couple of auxiliary tanks? have the GoodYear fill up the other 2 tanks with shutoff valves in between them...
I have that HF 21 gal, loud as hell.
I fixed mine, use soapy water to find the leak.
That’s where that saying comes from.
Don’t let a dime hold up a dollar!
Just turn those tanks into grills.
I have a old craftsman compressor that I bought in 1975, it has served me well for years, if I lived closer to you, I’d just give it to you.
Thanks for the advice brother it also refers to some life decisions like trying to make it work with an old girlfriend sometimes you just gotta let her go, god bless
Hey buddy look on the bright side you got a hell of a portable air tank or hook them together and use for Volume
Volume makes alot more possibilities
Sir I am trying to brag. I have a Quincy Qt5 and have had it for quite some time. It has never let me down. I would recommend one that has a spin on filter. But these use to be around 2000$ or so. Single phase can’t go wrong. You might even be able to find a used one mine has a 80 gallon tank. I hate to say this but the Ingersoll rand don’t appear to be the same quality. I hope this helps.
Next time try to get a belt drive piston compressor. They last way longer and when they do fail you either replace the motor or the whole piston unit and you're back in action. Lowes, HD and HF all have them in 120v ~30 gallon units, though for as much as you're cutting and painting a 240v 60 gallon stationary would be justified.
I have the same problem. But I have figured out if I take that little check spring valve up top out it will start and run. But all the air is coming out of that passage I can hold it down to to the threads and get in warm while the compressor is running and then cut it off and screw that valve in and turn it back on and my will run like a champ all day. Until it cools off. Then you have to repeat that process.
Good to see you
I think it’s the reset button
Sage advice.
Does it rain evertyday where you are? Seems like most of your videos show signs of recent rain. When I lived in south GA, I* could amost set my watch to the afternoon thunderstorms at 4:00. If the reed valves didn't fix it and the check valve is okay, then it's probably a cracked piston or rings. Seems like you've checked everything else.
It’s been raining a lot lately, looks like another week of it, it will dry out soon though once the heat sets in
Same for me when I lived in Mississippi. Would seemed like it would storm everyday around 2pm
Yes I agree and Allen if you can put more videos out, your almost to 100k bro
Think outside the box! I bought a Ingersol Rand T30 with a 5hp 3 phase motor. offered for $800 as a two phase motor. got there and it was 230V 3 phase. looked up a 5 ph 2 phase motor. It was $300, so the guy took $500 for it. got home and found that I really needed a three phase rotary converter. found a 10 hp converter with a 15" Dewalt Commercial Radial Arm saw for $300 Dude offered me $300 for the saw, so I ended up with a beast of a compressor for $500! Love it.
Maybe it’s just me but having a bunch of electrical tools and cords sitting in a puddle?
Its just you
I know it's hard but please don't go so far without making a video Allen had us worried!!!! Lol
I have 1 of those that just stopped working I think my pump has failed since it smells burnt. I have an 80 gallon compressor that needs a pump but I'm not driving 4 hours away to get it. Going to see if I can get the harbor freights working or buy another 1
Make a little smoker out of it 😆
I fully understand your misery I have an old speedaire belt dr paid 100dllars for it spent another 75 on gauges and a switch works like a dream its quiet and you can get parts at grainger if there's one near you don't mess with those funny brand compressor they're only grief any used american made compressor is better than a new one of those friend
With all those tanks I see 10 tail gate grills being built in a future video
put a gauge in where you put the quick connect ,to see if your making air,,make sure you watch the pressure
I "fixed" one by taking the compressor off and plumbing the tank to use as reserve.
With all due respect what don’t you just buy a good compressor? Like you did with your good welder and you’re good plasma cutter you have enough work so they won’t get paid quick enough
I’ve had that problem before. I used “copper coat” and it fixed the problem immediate
Thanks for sharing.
Those oil free compressors are made for home use and almost impossible to fix or get the right Chinese part I had one where the internal belt broke and ordered like 3 different belts nothing fit lol spend the extra 150 to 200 and get something that can be fixed
As a new guy in the game I understand more than you know.
My 40 year old Ingersol Rand just keeps on chuggin'.
make little grills out of the old compressors and sell them... make some money off of them !!!!
I hate to admit it but yer right! I hate sending the money but the time is better spent so Unless you know how to put the electric switch back together I'm cuttin bait n buyin a new compressor! What's out there not made in China?
You can cut all the old ones up now , smokers 👍👍👍
capacitor is what you need
Thanks, I still have that compressor laying around somewhere, I may try that.
Shoulda bought a quincy
Hi Allen where do I go to order from you?
I got it figured out if y’all will listen. How to make it run. But I don’t no what the soulution to fix it would be.
Use it as a volume tank
Like they always say, time is money
Time to make some smokers and make money off that problem!
Time is money!
Reed valves and plate are upside down.
They went back in the same way they came out
I wrote a. Country. Song. Ain't. Nothing. Great. At. Harbor. Freight. That's. Why
Well shit this didn't answer my same issue lol
Damn bro, just buy a decent air compressor.
Looks like you need to clean your yard and buy some gravel 😁
Nah
Just buy a quincy
Make new grill out of it.
Get a gas powered compresser, and call it a day...
BRAZIL
Ya look like your a bit flooded out my man. Concrete
If he could afford that he wouldn't be making this video lol
Turn them into a T smoker
This thing is garbage