So this has been great. I used this method to make two drawers. One of my drawers is 4 inch deep and the other was 6. Looks great and super strong. Thanks for the tips
cool that it makes it so efficiently. I think i prefer the box joints to look more intentional than autogenerated so I'd do it up custom in cad. Good process for the hold downs
Brand new to VCarve over from Carveco, was looking forward to this gadget. but for the life of me wasted more .25 in scrap. My male tabs are about 30% larger than the female. Any help would be greatly appreciated.
The box creator set the spacing. All you have to input is the size of the spacing and it calculates these rest for you. I also would suggest the tolerances to me .15mm. The thickness of the material is critical. Error on the slight larger so that they extend just beyond the surface. This is easily sanded to the surface.
So this has been great. I used this method to make two drawers. One of my drawers is 4 inch deep and the other was 6. Looks great and super strong. Thanks for the tips
Glad to hear the video helped and that your drawers turned out great!
Nice video! Now I’ll have to use that feature on Vectric!
Thanks!
It works extremely well. I’m amazed at how easy it is to use. Thanks for watching
cool that it makes it so efficiently. I think i prefer the box joints to look more intentional than autogenerated so I'd do it up custom in cad.
Good process for the hold downs
Thank you very much.
Another good job ❤
Thanks 😋. I appreciate you very much
Great tips and clear instructions ❤
I use Carveco, so need to find an equivalent Box creator for Carveco!.
Glad it was helpful! Thank you for watching
Really nice video--then I realized I only have VCarve Desktop. Lol
Maybe it time to upgrade. After all it Christmas time. A great gift to your self
@@PawPawsWorkShop It really would be a good time; right now it's like fillling the cereal bowl and going to the frig and...no milk. Lol
Brand new to VCarve over from Carveco, was looking forward to this gadget. but for the life of me wasted more .25 in scrap. My male tabs are about 30% larger than the female. Any help would be greatly appreciated.
The box creator set the spacing. All you have to input is the size of the spacing and it calculates these rest for you. I also would suggest the tolerances to me .15mm. The thickness of the material is critical. Error on the slight larger so that they extend just beyond the surface. This is easily sanded to the surface.
@ turns out my .125 Jenny bit was not correct dia. Thank you so much for the quick response.
I don’t see the Box Creator under Gadget Tab. Which version of Vcarve Pro are you using. I have Vcarve Pro 11.5. Do I need a newer version? Thanks!
@@norrisscott7316 you need to go to vectric website and download the gadget. It’s free
Not really into set it and forget it "woodworking" i love hand tools.
Fantastic! There are many people who love using hand tools. Definitely a valued skill