Thanks. Hope for more from the Mora. Just to take you back on P3. You said you could only achieve 970fps with KO slugs. What was you reg and other settings at. Because was thinking of getting rhe P3 to shoot those KO much faster than the Priest which is shooting them now at 925 fps
P3 in .25 doesn't shoot much faster with Knockout slugs. I think reg at 155. Never tried a higher reg because then shot count would be too low. Hammer doesn't do much in P3. I think getting the Mora will get you much more speed. Mora at reg 110 the JSB heavy pellets already go 950fps. I will try to review slugs next week after the 50J PRS match.
you made a good video friend, try not to be so nervous, as long as you do not shoot yourself or anything else not intended to be shot , you are good. sounds quiet, but my AEA hp standard custom edition is more quiet and 70fpe i do not know what that is in joules hmm guss a hundred joules aprox, 14=20joules so 14 x 5 is 100 joules , smiles have a good one. but i only have one regulator.
@@AirgunNL gargle with salt water, clean out nostrils, take antibacterial ointment and put a bit on a finger and swish it around each nostril and follow up with a spoon of honey and an vitamin E along with a vitamin C crushed up in the honey. it will make the antibiotic ointment absorbe in through the tissues there and also sterilize and then sooth the throat. because the throat nose and ears are all connected. might flush the ear on whichever side is more blocked also hot water and good soap in a bottle that can be squeezed and spray warm water into the ear but not under pressure just from an inch away. take care friend. TLW
It seems like this RTI company doesn't have people who think, how come the cocking mechanism can only be used on the left side? Serious mistake, what's the twist in this barrel? good for shooting with slugs? I don't think it will sell much and it will disappoint a lot of people who buy it.
Why are people so neurotic about having the cocking lever on the left side? Don't buy it. You might have to adapt. These pcp rifles of quality take millions of dollars and a long time perfect the R&D. Go buy an FX! I would not care if the Mora had a cocking lever on the underside! It's an amazing, technical pcp with features that have NEVER been used in a modern airgun.
Mooie video weer.👍
Very nice 👌 👍
Thanks. Hope for more from the Mora. Just to take you back on P3. You said you could only achieve 970fps with KO slugs. What was you reg and other settings at. Because was thinking of getting rhe P3 to shoot those KO much faster than the Priest which is shooting them now at 925 fps
P3 in .25 doesn't shoot much faster with Knockout slugs. I think reg at 155. Never tried a higher reg because then shot count would be too low. Hammer doesn't do much in P3. I think getting the Mora will get you much more speed. Mora at reg 110 the JSB heavy pellets already go 950fps. I will try to review slugs next week after the 50J PRS match.
De diameter van de loop is erg groot vgm. Zal de harmonie goed doen. Ik ben benieuwd naar hoe de mora presteert met slugs.
Mooi hoor enjoy👍😉
thanks for sharing but serious request make video in tripod :P with deep details if possible :)
Waar heb je deze gekocht? Mooi ding.
Ik heb deze als test geweer voor de PRS match gehad.
Bedankt, ik had gehoopt dat hij al ergens beschikbaar was
Where did you buy it because RTI arm Wolfiek have just Pre order ? And always in pre order the 21 of june !!!
I got it as test for the PRS Match in the Netherlands.
Ok but who give you this Mora ? RTI directly ?@@AirgunNL
Is this the RPB barrel? I have one in my P1, it’s my best barrel out of many!
Yes it is
you made a good video friend, try not to be so nervous, as long as you do not shoot yourself or anything else not intended to be shot , you are good.
sounds quiet, but my AEA hp standard custom edition is more quiet and 70fpe i do not know what that is in joules hmm guss a hundred joules aprox, 14=20joules so 14 x 5 is 100 joules , smiles have a good one. but i only have one regulator.
Not nervous just blocked nose so heavy mouth breathing. 😀
@@AirgunNL gargle with salt water, clean out nostrils, take antibacterial ointment and put a bit on a finger and swish it around each nostril and follow up with a spoon of honey and an vitamin E along with a vitamin C crushed up in the honey.
it will make the antibiotic ointment absorbe in through the tissues there and also sterilize and then sooth the throat. because the throat nose and ears are all connected.
might flush the ear on whichever side is more blocked also hot water and good soap in a bottle that can be squeezed and spray warm water into the ear but not under pressure just from an inch away. take care friend.
TLW
Is this gun is available in the USA now? I want to get one of my self. where can I get some information?
I think you can pre-order it at the moment.
Is this you? With the loose scope srew?
😊 is it you from de buurvrouw?
Indeed, is english not your native language? Haha
Nice video keep up the good work.
Is it 600mm barell?
Yes
Can we get this in .357. Yes?
Yes
@@AirgunNL for real?
@@derrickmitchell39dm www.rtiarms.shop/products/rti-mora-sniper
You never answer to the comments ???
See your other question
@@AirgunNL thanks for your answer 👍
Harga berapa bang
Show
Ummmm, what?
It seems like this RTI company doesn't have people who think, how come the cocking mechanism can only be used on the left side? Serious mistake, what's the twist in this barrel? good for shooting with slugs? I don't think it will sell much and it will disappoint a lot of people who buy it.
FX fan?
Your so wrong! It's a huge hit already. You don't know Shiiiaaatttt!!!!😂
left side cocking is best one, right side is less comfortable
On a bench, I wud prefer the left hand cocking. Keeping your right hand nestled on the grip, ready positioned for next shot...
Why are people so neurotic about having the cocking lever on the left side? Don't buy it. You might have to adapt. These pcp rifles of quality take millions of dollars and a long time perfect the R&D. Go buy an FX! I would not care if the Mora had a cocking lever on the underside! It's an amazing, technical pcp with features that have NEVER been used in a modern airgun.
Cool, I WON’T buy it.
Het is better than (dan) the rest, niet better then (wanneer) the rest.
Inderdaad beetje stom. Aangepast. Thx
Welke competitie schiet jij waarbij max 50 joule is ik ben mij er in aan t verdiepen in afstand schieten
@@jaggertje www.luchtbuks.net/index.php?/topic/142778-inschrijving-prs-achterhoek-16-juni-2024/
Prs schieten lijkt mij wel leuk het is dan wel wat ver rijden vanuit Zuid limburg
quality problems
?
@@AirgunNL friend of mine sent a part back when we noticed they cut it wrong and then just glued in a washer to correct it
@@deaczorz Can happen, so contact your dealer again.
@@AirgunNL allrdy did, they sending a new part, just pointing out that a serious manufacturer doesn't do scummy stuff like that to save 50€
I've never seen an airgun looks so ugly and RTI build quality is one of the worst.
Sure.
Rail and cocking mechinism is way too thin,
What do you mean? Which rail? Have you used the cocking lever. It operated really smooth, so no need for a thicker lever I think.
@@AirgunNL from what I can see it looks really thin.
hello. What is the real weight of the rifle? thank you
4.400 grams. With scope +/- 5.000. Quite heavy. So for hunting the compact might be better. For benchrest etc. the weight is only positive.