Denon AVR-S750H Advanced Settings Menu Walkthrough
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- This is a walkthrough or explaination of the setup menu of the Denon AVR-S750H. I have a A/V Receiver Basic review of Settings that I would recommend to watch first.
There are a lot settings and if you are new or advanced you may not know what all the setting are for.
Hope this helps.
ARC - is about passing audio from a TV back to the AV receiver so you can get things like audio from built on smart tv apps without using an additional table like optical.
Thank you, Ray, another great video. I watched your first video and this video compliments that one perfectly, Thanks again! God bless you and your loved ones.
Glad the information helps Charles!
This video definitely helped me understand the settings better on my s760h ty for posting
Great video thanks for taking the time to cover all these items
Thanks answered some questions concerning my Denon AVR s750H
Where do you connect the Dolby speakers and zone2 ,
Coz looks like they both using the same output
Hi! Thank you very much for your professional video!
How do you get into the Balance speakers. I want one speaker to be more loud than the other one but I can't find the set up for that.
Can i watch tv and have sound from the tv eventhough I have the tv conmected to the AVR?
Hi is there a way I can put rear speakers on louder & vocal levels up because when I'm watching movies the music parts is too loud vocals low
Thx I watched it 6 times too now my Denon x1200
Since you had subwoofer u should set all your speakers to small not large. Let your subwoofer handle LFE
Correct but if no cracking in the small speakers put in on big so get all out of your speakers around you also the center on big
How do I get to this setup screen ??
First things first, how did ŷou get to the video menu??
hello, I will have Chromecast connected to AVR and AVR connected to TV through ARC. I also have optical out from TV to a mixer than back to AVR. Now the question is what setting shall I have on the AVR in order to automatically switch between HDMI ARC and optical in a easy way. What I want in the end is to have sound coming directly through arc when watching movies and through optical when singing karaoke without have two go into settings all the time. Thank you
So you have optical/fiber cable to audio mixer then what type of connection to AVR? Is it optical? I’d make sure you match the AVR settings to the right input.
Typically it will auto sense the source.
Have you powered everything off then turn the karaoke on to test?
Have you ever tried setting up Denon AVR x6200w,that’s my old reliable ,plus I’m waiting for my Denon AVR 6800h to arrive a day from now ,pretty sure I’m going to have more fun setting it 😂
Semper Fi devil dawg
I have a fiber cable connected between my TV and Denon, do I need it? I already have a HDMI between the 2.
If your setup is content source > AV > AV out to TV via ARC/eARC - No you don’t need both. Let me know if you need more details.
Hi there
Do I have to connect this receiver to a tv in order to set it up? I’m not using it as a audio video device. Only using this as a audio device for a whole home audio device. My home has 7 zones with 2 speakers each.
You can use the IP of the AV from your computer browser. Sorry delayed I just moved. Let me know if you still need help.
Hey again, i have a denon 2300w receiver and a panasonic 820 4k player and a samsung 900b. What is the best way to connect all three to get lossless audio through my speakers and 4k to my tv, i know the 820 has two hdmi outputs one is audio and one is video , would i connect hdmi audio out to receiver and the hdmi video out straight to tv or would i use the passthough on the receiver with one hdmi cable to receiver, or is there another way. Any help would be great. Thanks again...Phil
.my speaker crossover setup (all speaker polk audio, av receiver marantz sr6015) Emotiva xpa-3 gen3 Power amp
Polk audio- Tower speaker RTI A9
Surround Speaker RTI A1
Centre speaker CSI A6
Dolby atmos speaker RC 80I
Subwoofer- svs pb 2k pro
What crossover level should I set my each speaker and sub on?
Just subscribed to your channel
where is the ARC located on model s750 model reciver, i can't find that will you able to help me
You would use the AVs HDMI out to the ARC on your TV.
i dont have the contro remote for the home theatre
I have 2 subs, 1 center, 1 left, 1 right in the family room, I connected those with no problem. I have speakers in other 3 rooms totaling 10 speakers, how do I connect those to the this receiver?
Hi, great video, I hope you can help me, I have this receiver conected with Samsung UHD bluray player, the hdmi cable out from blu ray playyer is connected to the receiver Denon, then the hdmi out from the AVR denon is connected to the tv samsung 4k, the issue is I can not have HDR video through the receiver. I will be waiting for your response
Hi,
When I pressed setup button on a Denon receiver remote, I didn’t see a menu showing on the TV. I just saw it on the receiver. What can I do to be able to see the menu on a TV? Thanks.
Couple of things. To check
1) AV is powered on
2) Do you have the HDMI cable “out” of AV in a ARC/eARC input of the TV. Then input of TV set to where you have the AV input plugged in the TV?
3) Double check all HDMI cables are working + some are directional and have arrows of input/output
Would you do a video just on hdmi control off, arc on, and pass through please. It’s a little confusing. Thanks for the video.
How do I set up surround sound
The basics is to connect the surround speakers to the labeled back of the AV. Restart the auto setup.
very nicely explained for a beginner. I have one question: after setting up 5.1 surround, I noticed that in the info screen of the remote, it only shows left & right front speakers as active. The front center & rear left & right speakers are not in "active" mode. Wonder why? Audio test shows all speakers have sound. How do I fix this problem, any suggestions?
Its not a problem. i think its the signal from your source. if its a stereo / pcm
A test is a test nothing more ...... Only when all is on in the menu then there is 5.1.
I am having a difficult time trying to pair my bose headphones though they paired once
Hi Rey, I also have a question,
recently purchased this unit the AVR s750H after setup my system clips out with a loud sound on the speakers. I tried resetting to factory default and it worked for the night but the next day once I turned it on it clipped again after 15 seconds.....it does it at intervals and its very frustrating. Can you explain why it does this ;......is it my speakers, I have mix up of speakers from a JBL sub to Polk audio center to Definity Tech Pro cinema speakers. I verified my wiring 5 times all look good.
Have you checked to make sure the wires are correct? As in the polarity. +/-
my s750h usb music repeats each song must manually play next song
G'day Sir. What an fantastic explanation how to set up our Denon AVR's . Got myself an S660h last week and I can't work out how to run in stereo setting also the subwoofer Maybe you've got a solution for that Regards Jack
Cngrts bro , i got my 1700h yesday.. any idea about amp assign ? Which one do we need to set??
Hello. I have the Denon X250BT amp with 5.1 speakers. I am trying to do a factory reset but on my amp but it just says INITIALIZED and thats it. The reason i want to reset is because the Home theater installation technician, during the initial setup, set the 2 front tower speakers to a different bass and treble setting individually and it just sounds bad. Am not sure whether the amp has some kind of secret menu or service menu to enter and make these changes. Was wondering if you have a solution for this and could please help out. Thank you.
Can you press enter on “initialized”?
@@sugarey No. It just says initialized and blinks few seconds and thats it.
I can’t get my on screen display and have no idea why. Any clue on how to get it to display on the tv? I have video and audio and I’m using the arc.
Kind of figured it out. My receiver is on hdmi 1 arc and my Apple TV is on hdmi2 which is what we use for our main tv viewing. For some reason I had to back out of the Apple TV and go into my blu ray hdmi 3 on the tv to see my menu. Anyone have any idea why?
I typically use the AV “HDMI out” into the TV ARC. Set the TV input for that ARC. Then I connect all my sources direct to the AV (HDMI 1=AppleTV / HDMI=Cable). The AV can auto-detect which source you’re using.
Hi sir need help