*Non_Cuber comes over Them: Nice cube! How much did it cost? Me: 60 bucks. Them: WHAT THE HEECK, WHY WOULD ANYONE SPEND SIXTY BUCKS ON A WHAT A UMMM, RUBIKS CUB??/ ICOULD BY SO MUCH V BUcKS FOR THAT! Me: Wow, OkaaY then.
Koopa64 Don’t you realized that the GAN356 X has more features and more customization, and more accessories like magnets. The magnets are quite expensive.
Yes! Thinking about skipping this model and upgrading 7x7 instead. I am still in love with my Gan SM, so no great loss. With the price of Gan cubes being what it is I usually skip every other model. The prices have been going up consistently, but I think Gan will start hitting a price wall with its 3x3's.
@@meixiapan3427 Just like Zeix said, magnet are cheap and those capsule, i dont think it would be very hard to make.The molding would be a little bit difficult as it is a little bit more complex, however, i really dont think it should cost this much. GTS3M has the spring compression system, which is equal to GES nut, and it cost a lot less, around 35$. If we add magnet capsule to it, well. I dont think it would be cost more than 50$.
Sort of. I said something similar. The SM was a HUGE improvement over the UM, and in the video I said I would continue to try it out and see if my times got better with it. In the video I mentioned that my times were slightly worse than normal. They never got better so I didn't continue to use it. The X is the first Gan cube I've done multiple rounds with and used at home for an extended period of time.
I would be worried that over time the magnets could slip out of their slots ever so slightly, causing the cube to not turn anymore. Is that possible? Or is there some kind of clasp or clip system that holds the magnet capsules in place? Or is it just tightness that holds the capsules where they should be?
m8 ur someone that has never bought a cube for over 20 bucks. Gan cubes are the best. Ask feliks why he is not using the wind P.S. I hope you are joking because if ur not... O_O
I was fortunate enough to get this cube as a Christmas gift, and after unboxing and setting it up it was pretty much love at first solve. Even knowing how good it is though, Idk if I'd spend $62 on it--maybe $40-50 at the most. Still, if you're an avid cuber and you ever get the opportunity to try it, do *not* pass it up. And if price is not an issue, this cube is a must in my book. Currently I'm using the blue GES nuts at 0.6mm tension, the clear magnet capsules, and some Angstrom Compound V to keep it nice and speedy.
If you don't like the 356 X, then you should get the 356 eggs, the size is 56 mm and you get 3 a packet , hence the name, you can get it in white and brown :)
Please. I’m desperate. Anyone have a great setup for the Gan 356 X. I’m about to get one and I have no idea what to put in it. All I know is that Compound X and Gravitas works well. Please... anyone?
4:27 Phil, you could have skipped PLL very easily by doing a U, sune, and then a U2 as AUF. It was easy to see because of the block in front of you and the geen edge at the right, of opposite color to the corner next to it. Too bad because it could have been a low 6 :/ Anyway, great video as always !
Can you describe the difference/feel between the stickered and the stickerless versions? I assumed they would have similar feels, and while no one is really mentioning or answering this in the other videos I have seen, I did see in a forum that one person said the stickered felt more stable and had smoother turning even though they themselves had always preferred stickerless before this.Thanks!
Nah i dont have both stickered and stickerless versions of the gan 356x, but it’s definitely safe to assume stickerless and stickered have the SAME hardware. I bought stickerless because to me, it looks cleaner. Also a few years back i saw many people having damaged stickers lol so i got worried a bit.
I’m i the only one having a hard time grabbing the ipg core thing it’s like impossible to twist. Feel like now instead of the small gan tool it’s worse. I need a pair or needle nose pliers.
in case Carson Warren's comment disappears, Numerical has "presets" for tension and can be adjusted by hand, IPG V5 is free-floating, so more precise, and needs a tool.
Anyone could compare it to an SM? I currently have an SM and a 354 and the SM actually feels smoother than the 354. Though I'm shying away from the SM since it's stickered.
How much better is a 356x compared to a magneised little magic that I am using now? I like my little magic but i want a GAN cube really badly and was wondering does it justify the cost. Speaking of cost, will there be any black friday deals going on?
How does this new tensioning system work? Would I be limited to one of three tensions, or is there a continuous range of tensions like with the old GES nuts?
I think it might be interesting if someone started turning the null magnet capsules into individual preferred magnets eg: stronger than whats already there or the other way weaker than whats already there! who else thinks this might be cool?
3:14 dude I got a great thing instead of taking it out and taking a cube rotation just do a flipping alg from a big cube then insert instead of a cube rotation
At 4:28, you could have skip pll by just doing sune Phil! But it’s okay, nice solve anyways!
lol
He does COLL, so for that specific case it is a different alg
Gan 356x is the best 3x3 on the market right now in my opinion.
Who agrees??
I have not tried it but i think it is the best 😂
I didn’t try, but my favorite is GTS3M
In my opinion gan is very expensive
It’s good but overpriced
The gts3 has the fancey spring system and it’s only $35 sooo a arguably better cube for almost half the price....
The r is better
Obviously it’s the shangshou gem
conclusion : best and expensive 3×3 in the market
I agree.
I'm one of those who have one *kill me*
Its like apple but they’re actually good this time
@@wrth ooooohhhhhh
My wallet is crying :(
I feel that... 😭😭😭😭😭
Same
Stop commenting this on every gan 356 x vid thanks
This is why Chinese websites exist
I'm crying because the wallet is the emptiest thing on earth. Hopefully, it goes cheaper after a few years :(
*Non_Cuber comes over
Them: Nice cube! How much did it cost?
Me: 60 bucks.
Them: WHAT THE HEECK, WHY WOULD ANYONE SPEND SIXTY BUCKS ON A WHAT A UMMM, RUBIKS CUB??/ ICOULD BY SO MUCH V BUcKS FOR THAT!
Me: Wow, OkaaY then.
LlamaCuber Underrated comment bruh
*cringes*
I get what your point is but the joke is cringe
Yeah I mean... Leave other people alone instead of making them feel like an idiot.
Me: instant cop
Wallet: this ain’t it chief
hey can you guys make a video comparing the gan 356X and the GTS3M?:)
I like the Valk Power M better, but when I get the X, It will most likely replace my Power.
The emerald dude I like gts more
"I don't really have small hands"
Weird flex but ok.
Giveaway *cough* *cough*
Costs more than the Hays 7m tf
Lol i didn't think of that!
Koopa64 Don’t you realized that the GAN356 X has more features and more customization, and more accessories like magnets. The magnets are quite expensive.
@@meixiapan3427 magnets are actually really cheap. U can easily get 50 small neodyneom magnets for a couple of dollars
Yes! Thinking about skipping this model and upgrading 7x7 instead. I am still in love with my Gan SM, so no great loss. With the price of Gan cubes being what it is I usually skip every other model. The prices have been going up consistently, but I think Gan will start hitting a price wall with its 3x3's.
@@meixiapan3427 Just like Zeix said, magnet are cheap and those capsule, i dont think it would be very hard to make.The molding would be a little bit difficult as it is a little bit more complex, however, i really dont think it should cost this much.
GTS3M has the spring compression system, which is equal to GES nut, and it cost a lot less, around 35$. If we add magnet capsule to it, well. I dont think it would be cost more than 50$.
Do a comparison video about
Gan 356 X vs Gan Air SM
That should be very interesting...
Sebastian's tps...
Max Park - *Am I a joke to you* 😂
@@thespeedcubingstudio2537 yes
@@shubbbb lol
Shubham ‘s tps
@@thespeedcubingstudio2537 i guess he got 3rd in worlds and max not ;)
3:53 When I think about high flex, ummmm...
RiceGum!!!
LOL, James joke
5:55 didn't you say that about the UM and the SM too?
He did...
Not the Um but he said for the SM maybe but never did
Sort of. I said something similar. The SM was a HUGE improvement over the UM, and in the video I said I would continue to try it out and see if my times got better with it. In the video I mentioned that my times were slightly worse than normal. They never got better so I didn't continue to use it. The X is the first Gan cube I've done multiple rounds with and used at home for an extended period of time.
cyotheking Chris ok thanks! :)
At 5.55 he did...so did Mats Valk when he broke feliks wr
Imagine how expensive the angstrom polymer coated version would be.
CrankierMusic 74 80$
@@MäenpääHarri Fair enough
And now, time to wait for the angstrom version and witness a 75 dollar 3x3, crazy expensive
G Perm it’s already been made lol
My channels name used to be g Perm 😹
I hate you.
G perms fkin suck
The flex of the 356 x
Damn he should be a rapper
Legend has it he roasted the life out of the weilong
I would be worried that over time the magnets could slip out of their slots ever so slightly, causing the cube to not turn anymore. Is that possible? Or is there some kind of clasp or clip system that holds the magnet capsules in place? Or is it just tightness that holds the capsules where they should be?
Yep, a clip system, in other videos, they show it, it clicks into place and stays there
They clip in pretty reliably. We've been doing thousands of solves over the past few months, and haven't noticed any instability.
Still can't beat my Shengshou Wind.
it has squared off corners, edges and centers; no corner twists!
suck that Gan!
Sucks that wind its too blocky get shengshou aurora instead
m8 ur someone that has never bought a cube for over 20 bucks. Gan cubes are the best. Ask feliks why he is not using the wind
P.S. I hope you are joking because if ur not... O_O
r/woooosh
wisecraft live r/whoooosh
wisecraft live of course i am
*starts to copy apple*
Should i take a black ipg v5 or stickerless numerical ipg? Big dilemma pls help
Can someone tell me what't the music in the background. I like it!😁
Sameee hahahhaha
@@PromybroCuber Yeah, I wish I know it.
@@kristiyanpetkov1565 Found it! Name is into the blue by j.a.k
@@PromybroCuber Ohhhhh, Thank you.😂
@@PromybroCuber thanks
i have the money i saved to buy it, but i dont have enough money to buy it with the lube
F in the chat for my wallet
I was fortunate enough to get this cube as a Christmas gift, and after unboxing and setting it up it was pretty much love at first solve. Even knowing how good it is though, Idk if I'd spend $62 on it--maybe $40-50 at the most. Still, if you're an avid cuber and you ever get the opportunity to try it, do *not* pass it up. And if price is not an issue, this cube is a must in my book.
Currently I'm using the blue GES nuts at 0.6mm tension, the clear magnet capsules, and some Angstrom Compound V to keep it nice and speedy.
Thicc lube
Orson Tube Damn...
ITS SSSOOOOO TTTHHHHIIIIICCCCCC
@@elao7829 The THICCEST it can get
@The emerald dude THICCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
Weirdos...
My initial thoughts: Seriously such a lightweight cube.
22 000 Views LOL
If you don't like the 356 X, then you should get the 356 eggs, the size is 56 mm and you get 3 a packet , hence the name, you can get it in white and brown :)
🍳🍳🍳
0:38 me every time
It's ok chris
Btw it's Titus from barbecubing fall if u remember me
what about the GAN356XS
Very detailed! Thanks!
What is the difference between the numerical IPG and the IPG V5?
I'm wondering too :/
I want a Gan 249 X!!!!!!!!!!!!!!!!!!
@James Mäenpää I now, but I now that Gan can make it too👌
GANS, GAN, GUN, GAHN, GONZ, GEN/GENZ, 2020 still open pronunciation, this is still awesome cube
is it smoother than the sm?I didn't like the sm do you think i will like the x? Chris which camera and mic do you use? Chris can you do a setup tour?
you should have seen my face when i saw this video can do 1440p60 HD and 2160p60 4K
6:00 wrong pll :v
Please. I’m desperate. Anyone have a great setup for the Gan 356 X. I’m about to get one and I have no idea what to put in it. All I know is that Compound X and Gravitas works well. Please... anyone?
4:27 Phil, you could have skipped PLL very easily by doing a U, sune, and then a U2 as AUF. It was easy to see because of the block in front of you and the geen edge at the right, of opposite color to the corner next to it. Too bad because it could have been a low 6 :/ Anyway, great video as always !
i was looking for this comment xD
X-actly!
Get it?
Because it is called the gans 356X
@@danimationsd9807 nice lol
Yeah
phills first solve is my 3x3 pb 9.350
If it’s the best and even it’s priced at 500$, I still definitely buy it!
Stop being cheap with your passion, people 😒
Whatns the diffrence btw IPGV5 and numerical IPG? You can choose one or the other on gan's website
New wca event gan x setup
what is the difference between ipg v5 and numerical?
Can you describe the difference/feel between the stickered and the stickerless versions? I assumed they would have similar feels, and while no one is really mentioning or answering this in the other videos I have seen, I did see in a forum that one person said the stickered felt more stable and had smoother turning even though they themselves had always preferred stickerless before this.Thanks!
Did you get one? I wonder this exact same thing.. I want the smoothest one, Im probably being stupid... they shouldnt be any different..
Nah i dont have both stickered and stickerless versions of the gan 356x, but it’s definitely safe to assume stickerless and stickered have the SAME hardware. I bought stickerless because to me, it looks cleaner. Also a few years back i saw many people having damaged stickers lol so i got worried a bit.
I’m i the only one having a hard time grabbing the ipg core thing it’s like impossible to twist. Feel like now instead of the small gan tool it’s worse. I need a pair or needle nose pliers.
sup guys on amazon the picture shows the gan 356 x with the red blue and yellow nuts in the case do you know what nuts are in the cube already?
green
@@leadcube591 one more question what magnets come installed with the 354 m
@@aaronmerrill5901 yellow
@@leadcube591 thanks for the info ur a god
Who know the music that they use in this video? If you know, pls comment down below
Which Method do you use for solving the cube PHIL
What is better ? The cubicle or speed cube shop? I need a better gan 356 x
I have the 354M. But I m getting 356X on my bday
Its not 356X
its 35610
It's GAN 356 X
damn daniel, back again in the wrong hood😄
It still didn't answer the question..
What's the difference between iPG5 and numerical ipg?
Wondering too :/ no answer out there
About $10
in case Carson Warren's comment disappears, Numerical has "presets" for tension and can be adjusted by hand, IPG V5 is free-floating, so more precise, and needs a tool.
GAN356 X+ NoneMag Tubes= GAN356 R
Cubicle Labs Boron Treated GAN356 X plz!
Hey cubicle I hate a flexy cube. Can this be fixed somewhat with the customizable options?
Pls reply
Anyone could compare it to an SM? I currently have an SM and a 354 and the SM actually feels smoother than the 354. Though I'm shying away from the SM since it's stickered.
We don't care about wat size bla bla bla wee need moneyy
I am watching this video cuz when i buy the x and then the xs came i hate my mind hahah
How much better is a 356x compared to a magneised little magic that I am using now? I like my little magic but i want a GAN cube really badly and was wondering does it justify the cost. Speaking of cost, will there be any black friday deals going on?
lol, snap
I hope they will release an x version of the 354, I personally don’t like the 56 mm cube but I want to change the 354 magnets😫😫
what does the gan come pre lubed with?
Hey what's your timer app that you are using
this one or the moyu gts3m?
Is it worth to buy it for 42 euros on ukcubestore?
Hey,Chris.Can you speak Vietnamese
Hi bác
It's a fantasticube
What cube should I buy I am 11 years old
anyone notice airplane mode was on on the ipads
I am sooooooo happy because I just ordered this 😁😁😁😁
You shoud give it to me
Can you make a comparison between the Gan Air SM 2019 and Gan 356 X?
If we get three of them this will become I n t e r e s t I n g
Damien - *solving for a video
Damien - *does a U3
Phil - NANI?
How does this new tensioning system work?
Would I be limited to one of three tensions, or is there a continuous range of tensions like with the old GES nuts?
Who here prefers stickered or stickerless?
I bought this for 45$ not from a cube websites. And it still very good.
Is it worth it?
Yeah I already know when my cube arrives I will try to change the magnets on it and demagnetise is and not be able to find the strong ones
the colors on the sm are better though
Getting this for christmas
Great review...Any difference between the stickerless and the stickered?
One has stickers and the other doesn't
Dannythetwo ha ha...ok!
I was about to say that! I'm (we are) so genius
Still loving this cube
Is it expensive because of the hype or is it truly worth it? I broke my cheap 3x3 and im trying to buy one.
Is there a sub 10 tutorial for methods and things along that line?
Why don't I have the notches ?
I want the GAN356X but i dont have money for it!!!
What is the name of the timer
its heavy and expensive
The cube is more of an upgrade on the sm, but not the 354m. Agree?
Yes it is. 354m is in different line.
which chris, tran or olson
I think it might be interesting if someone started turning the null magnet capsules into individual preferred magnets eg: stronger than whats already there or the other way weaker than whats already there! who else thinks this might be cool?
2:40
*I've ordered this cube yesterday only. which lube should i use ?*
I'm definitely going to buy the angstrom version of it
Is there any diference between numerical ipg and ipg v5
Sebs id it you?
3:14 dude I got a great thing instead of taking it out and taking a cube rotation just do a flipping alg from a big cube then insert instead of a cube rotation