So I watched this video on my Amazon stick TV. I then got my phone and searched the video only to thank you for putting a smile on my son's face as the car started working. Thanks for making both of us happy. LIKED AND SUBSCRIBED!!!
Tha k you freaking much. I've had a stampede that has not worked for so long. Noone could figure out the factory reset. You just fixed 3 of my cars. Thank you!!
I have the traxxas nitro slayer. Would the TQ 2.4 with reviver 6519. Works on that RC ? The original 27 TQ had trottle & steering nobs. Thank you in advance.
Hey so I just got a traxxas big foot and it dies not want to bind! I go through the exact procedure you show on this video but the receiver doesnt do anything, no light or anything! Do you ever get faulty receivers on a brand new rc car??
I tried to switch the Mode from training mode and it did but when I tried to switch it back the light turned off for the speed control and it won’t turn back on but when I press the button it’ll turn the steering on but the lights not on and it doesn’t work for the throttle
I did this to my slash 4x4 and it still did not connect... for some reason the remote did everything you said It would but the car wouldn’t move. Any tips?
My traxxas slash 1/10 4x4 is going super slow and when I tried to do the factory reset no matter how long I held down the set button and turned it on it wouldn’t turn green how do I fix that?
Please help me I just did the same thing and when I did it it worked up when I see if the turning works it makes the wheels go forwards and backwards. So when I turn the goes it like the turning the the Throttle. Please help me I don’t understand
Thank you for this video I had to reset my Traxxas TRX 4 Blazer after placing in the tqi link on my remote and all it really did was make it harder to use the remote control because this model doesn't really support it too well and it made a lot of glitches and twitches in the steering and made it harder to control the truck.
I’m trying to fix mine now but it’s a petrol TRX 2.5R engine and when I go to start it up I cant because I can’t rev the car. When I go to connect the controller the receiver it keeps on flashing red and orange I don’t know what to do
My forward and reverse doesn’t work it can turn its wheels but any method I try it doesn’t work it’s a traxxas f-150 raptor SVT any tips on how to make it work again
Ive been trying to sync my traxxas slash and followed these instructions. I got a new receiver and when i turned on the truck, the XL5 ESC module blinks green and the receiver itself is flashing red. (remote controller is flashing red as well) I have no idea of what im doing wrong.
Dude you’re a fricken life saver. Thanks so much. I didn’t have reverse and this isn’t my truck. My friend wanted me to do a service check and he said not to break it. I was worried I blew the motor for reverse. But nope. It just took your help to reset it. Thanks.
So I reversed the throttle but my break has also reversed on my trx 4 Sport. So when I push the throttle to go forward then apply the break it goes straight into reverse. When I let go of reverse then apply forward throttle it goes into break.
Ok any help would be appreciated. I’ve tried resetting and tried binding it. Both “worked” but I only have steering no matter what I do. Any idea how to get my throttle to work??????
I would try it with a different NIMH battery. If it still happens try factory resetting the esc, if still no luck might need to take it to a hobby shop so they can check the power.
You need to either switch the wires with each other from the motor to the ESC or you need to flip the plug from the ESC to the receiver the opposite direction
Mine doesn’t work. All the lights turn green and after that they all go off and the car reacts to Noting, the car is just off again. Please put a command if you know how i can fix this.
Hello out there, I have a Traxxas Emax and I would like for some one to help me program the truck with the radio. The truck has been upgraded with a Castle mother, 50,000, and a Mombo 2.... the batteries are S3, 5000....
So I watched this video on my Amazon stick TV. I then got my phone and searched the video only to thank you for putting a smile on my son's face as the car started working. Thanks for making both of us happy. LIKED AND SUBSCRIBED!!!
Thank you soo much!
Tha k you freaking much. I've had a stampede that has not worked for so long. Noone could figure out the factory reset. You just fixed 3 of my cars. Thank you!!
Thank you for helping me get my RC car up and running
Thanks a lot you saved me from buying a new Traxxas. Now I can reuse my r/c traxxas car again.
I have the traxxas nitro slayer. Would the TQ 2.4 with reviver 6519. Works on that RC ? The original 27 TQ had trottle & steering nobs. Thank you in advance.
Your the only video that helped I just fixed my xmaxx I tried everything everyone said the ESCwas done but this fixed it
Glad we could help!
Thank you...I could not figure out how to do the setup without your help...you rock!
Hey so I just got a traxxas big foot and it dies not want to bind! I go through the exact procedure you show on this video but the receiver doesnt do anything, no light or anything! Do you ever get faulty receivers on a brand new rc car??
I tried to switch the Mode from training mode and it did but when I tried to switch it back the light turned off for the speed control and it won’t turn back on but when I press the button it’ll turn the steering on but the lights not on and it doesn’t work for the throttle
Does this TQ radio have a gyro like the other TQ
Cant bind both having problems wont bind both at same time on multiple rc ..what you think great video by the way
I did this to my slash 4x4 and it still did not connect... for some reason the remote did everything you said It would but the car wouldn’t move. Any tips?
My traxxas slash 1/10 4x4 is going super slow and when I tried to do the factory reset no matter how long I held down the set button and turned it on it wouldn’t turn green how do I fix that?
@@chrismagallanes8858 I got it my slipper clutch was really loose
Please help me I just did the same thing and when I did it it worked up when I see if the turning works it makes the wheels go forwards and backwards. So when I turn the goes it like the turning the the Throttle. Please help me I don’t understand
I have a traxxas defender
Thank you for helping me get my Traxxas back wheel drive combined
👍
Thank you for helping me out on my Traxxas back wheel drive/ RC car
What do that mean when the light on the receiver is stuck on a solid red light and won't blink at all so it won't bind
How do you reset the ESC because it's at a steady green but won't go forward or throttle at all
SkippyTrx I’m having the same problem
@@luvsmokeyyd7278 I found out the button was stuck which is why it didn't react to me pressing it and after that I was able to set it back to default
The ez set button or which one ?
Thank you for this video I had to reset my Traxxas TRX 4 Blazer after placing in the tqi link on my remote and all it really did was make it harder to use the remote control because this model doesn't really support it too well and it made a lot of glitches and twitches in the steering and made it harder to control the truck.
I have no throttle on my two-wheel traxxas slash any suggestions
I’m trying to fix mine now but it’s a petrol TRX 2.5R engine and when I go to start it up I cant because I can’t rev the car. When I go to connect the controller the receiver it keeps on flashing red and orange I don’t know what to do
Hey does this remote reset work on the tqi remote I noticed you had the tq in the video
This will work on tq, tqi is done in a similar way but not exactly the way in this video.
Mine won't drive but the motor is getting voltage
Very helpful thanks from New Zealand
Can you use this on different recievers (non traxxas)?
My forward and reverse doesn’t work it can turn its wheels but any method I try it doesn’t work it’s a traxxas f-150 raptor SVT any tips on how to make it work again
Can you guys do this vid again but with a tqi radio cause this is a tq it’s much more different and has more bottoms
Awesome_ Rc_Guy no problem we will work on it. Thank you 👍
Can you use a 11.1 LiPo battery on that type of RC car you have
No i don't think it can handle it
Ive been trying to sync my traxxas slash and followed these instructions. I got a new receiver and when i turned on the truck, the XL5 ESC module blinks green and the receiver itself is flashing red. (remote controller is flashing red as well) I have no idea of what im doing wrong.
Awesome videos super simple right to the point thank you very much!
I have the 1/16 slash and i reset everything and still no reverse its on sport mode and i flipped the motor wires. And no reverse what could be wrong?
Dude you’re a fricken life saver. Thanks so much. I didn’t have reverse and this isn’t my truck. My friend wanted me to do a service check and he said not to break it. I was worried I blew the motor for reverse. But nope. It just took your help to reset it. Thanks.
I'm so happy this video helped you! Thank you for watching
hi , xl-5 esc how to Restore Factory
you are a life saver thank you so much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Good video was gunna throw out the remote and receiver. It just wouldnt bind. Tried everything. Factory reset did it thanks man
So I reversed the throttle but my break has also reversed on my trx 4 Sport. So when I push the throttle to go forward then apply the break it goes straight into reverse. When I let go of reverse then apply forward throttle it goes into break.
My xl5 esc is flashing red to green still no go or turn any ideas how to fix have a green on link and green on remote thanks for any help
Same problem
None of those worked my black box near my power on for my stampede just keeps blinking red
This help my Traxxas rustler xl-5. Very much thank u
Mine receiver i just red not blinking and the trick isnt working i have a Hoss 4*4vxl
Thanks for your help 👍
Ok any help would be appreciated. I’ve tried resetting and tried binding it. Both “worked” but I only have steering no matter what I do. Any idea how to get my throttle to work??????
Might be the servo. Chek it with another servo. It might also be the channel on the receiver.
This helped on my sprint 2 thank you
Did your gas work and not your steering cuz my steering isn't working if you know how to help me can you please help me
What do I do when my car just keeps cutting off with fully charged battery’s
I would try it with a different NIMH battery. If it still happens try factory resetting the esc, if still no luck might need to take it to a hobby shop so they can check the power.
My Latrax teton isn't working its only steering and it wont go forward or backwards can someone help
Mine links for a second and unbinds what is my issue
Same
Thanks cuzz on crip u saved the loc
What do i do if that doesnt work
Thank you , this video Save my First ride whit brand new xmaxx….. stupid firmware uptade ….. Thank you….
Bro it helped💪🏾😎
my dad is green but the receiver is red same on the remote still
3 battery’s later mines still flashing red
For mine when I try to go forward it drives backwards and when I try to go backward it drives forward. if you see this can you please help
You need to either switch the wires with each other from the motor to the ESC or you need to flip the plug from the ESC to the receiver the opposite direction
I’ve tried this several times and my steering still won’t work, but it works on a different receiver
This doesn’t work for my truck
What if that don’t work ?
Good job on the video,, keep it up
my remote light did not blink green
Thank you that really helped
Thank you so much
Mine doesn’t work. All the lights turn green and after that they all go off and the car reacts to Noting, the car is just off again. Please put a command if you know how i can fix this.
Wait, i found the problem!
Awesome
@@dennishanouwer what was the problem I have same issues
@@allanmachado1823 It was 2 years ago i forgot how i fixed it maybe a other video can help
Mine still won’t work
Hello out there, I have a Traxxas Emax and I would like for some one to help me program the truck with the radio. The truck has been upgraded with a Castle mother, 50,000, and a Mombo 2.... the batteries are S3, 5000....
My esc is just blinking green and nothing is helping
Thank u so much!
Thank you!!!!! It worked well
You are welcome 👍
My car turns green and stops when I release
It might be under Lipo mode. Switch it from Lipo to nimh mode. This should fix it
Amazing RC Store thanks for the advice but it turned out I fried the ESC
@@timothyplante7712 that might be what happened with mine because whenever I try to turn on the ESC sometimes it won’t even turn on
I worked thanks
👏👏👏👏👏
Thank you!!!
My rc car remote stop working
Thx
Thanks worked perfert
Thanks man
Its not working at all with the hoss at all
And here I was thinking I've gone done fucked it all up again..! But no... I was about to throw it away!!! Edit: Thanks ma dude u da man .
like!!!!
My controller just stays green
Thank you sir lmao
You know I killed my traxxas radio because when I get the radio on my hip brushless bmw m3 the radio is in the rain, so I killed my radio. J
Get 2 the point bro
Thank you...I could not figure out how to do the setup without your help...you rock!
What do I do if my receiver doesn’t have a link button? It’s a old traxxis ruslter that I bought a new remote for after loosing the other one for it
My remote won’t stay in find mode
My remote won’t bind
Thank you!!!!
My steering still isn't working
Could you please help me please
Can someone please help me