Just did this after watching last night, I had a horrible rattle coming from the active exhaust being closed and this fixed it, nothing but engine noise at low RPM now, appreciate ya 🤙🏼
Super simple and took me 20 minutes; most of that time was putting the car on the tire ramp. It's not a mind-blowing difference but the sound is improved. Thank you for sharing!
Great video bro. I did this same exact thing to my 2021 Challenger Scat Pack Shaker. It works perfectly too. I used high temp. resistant zip ties I bought on Amazon. No engine codes, nothing. Just a nice, growly-type exhaust note.
Appreciate it bro💯🤝🏾 I’ve should’ve gotten high temp zip ties at first but I was so eager to get it done and sound good I did made an updated video with 6 gauge copper wire and it’s holding strong 💪🏽
Awesome video friend been wanting to straight pipe my new charger but this damn active exhaust squeak had been annoying the hell out of me. You may not take all the credit but you gave all the info on how to do it step by step and size of the nuts etc. Much appreciated!
I did this and left the springs in, better to leave them out because the spring helps the valves open so if you leave them in the zip ties will eventually loosen up and make a new nasty rattling noise
Yeah you’re absolutely right! I came across it making the rattling sounds and replace the zip tie with 6 gauge copper wire. I have an updated video on my channel on it but thanks for commenting on our video every comment could help other people.🤟🏽💯
@@HemiTwinz Fursure! Yea as soon as I seen zip ties I thought of wire instead to make more durable but I didn’t have any but zip ties will do as for rn till I get wire waiting on that update vid💪🏽
Update don’t do this if you don’t like seing your check engine light cuz mines been on since I did it car runs sounds the same just throws a code 2019 and up
I red up on it and it said it would but I have. Buddy who has 17 charger and he didn’t get no check engine light and no the check engine would not affect it
You turn it to the right correct .. and one of the holes for the 8 millimeter bolt plastic broke would that make a difference for check engine light on … I have a 2017 Hemi Rt trackpack
Yeah try doing it with 8 gauge copper wire put it in the same place but the year is maybe why the check engine light came on usually when who does it 2019 and really doesn’t have a problem but 2019 and below has the problem but the check engine isn’t going to hurt nothing you probably just have to clear it everyday if you want to do this mod
Well you are tricking the system. With the active the only thing it is looking for is the valve to open and close. As long as the black piece with the yellow gear moves, the system is satisfied.
We heard a lot of people was having problems with it like a check engine light comes up for them but give it a try if it don’t work just let me know bro
You could in theory just cut that section out and hang the valve up under and secure it. No flap, no checking on it, nothing. That way the flap is gone also.
Just did this after watching last night, I had a horrible rattle coming from the active exhaust being closed and this fixed it, nothing but engine noise at low RPM now, appreciate ya 🤙🏼
No problem bro it’s wayy better now
Dude I got that little rattle.. that's what it is.. Im doing this
Yeah that’s the active exhaust rattling bro lmk if this helped you
@@HemiTwinz hell yeah it solved it.. much appreciated
@@real_propalike anytime bro💯✊🏽
Literally just did mine took a lot longer than my big ass expected, but I got it done. Appreciate you posting the video, bro.
Super simple and took me 20 minutes; most of that time was putting the car on the tire ramp. It's not a mind-blowing difference but the sound is improved. Thank you for sharing!
Great video bro. I did this same exact thing to my 2021 Challenger Scat Pack Shaker. It works perfectly too. I used high temp. resistant zip ties I bought on Amazon. No engine codes, nothing. Just a nice, growly-type exhaust note.
Appreciate it bro💯🤝🏾 I’ve should’ve gotten high temp zip ties at first but I was so eager to get it done and sound good I did made an updated video with 6 gauge copper wire and it’s holding strong 💪🏽
Awesome video friend been wanting to straight pipe my new charger but this damn active exhaust squeak had been annoying the hell out of me. You may not take all the credit but you gave all the info on how to do it step by step and size of the nuts etc. Much appreciated!
No problem glad that I could help !!
just did it to scat pack challenger wide body
sounds awesome
Ik once you did it came out great💯
Bro , please help . Will it really fix the rattling sound completely???? . Any engine light bro ???
@@malwedejatt5556 yes bro 100% it will help fix the rattling and no check engine light would come on just make sure you plug back up the actuators
Appreciate brother. Very fast reply. Thanks Bro👍
After putting the zip tie does anybody hear the valves trying to open after turning the car on?
just now coming across this vid will be trying soon tired of hear the squeak on my last call charger
My valves keep closing after about a week or so it's pretty annoying
Thanks for the video and instructions.
No problem bro thanks for stopping by 🤟🏽
I do that, but the check engine is on know ?
😊great video yeah I seen this other guy doing the same thing with his. On his challenger thanks brother 😊
Np anytime ✊🏽💯
Thanks man i love the difference
I would do this to all my cars💯
How do you prevent the Check engine code on the dash board?
Good video btw dude !
love that sound men very very nice good job
Appreciate it
My driver side melted so a double zip tied both😂now we Good💯
Yeah I made an updated video with 6 gauge copper wire that’ll hold wayyyy better than then zip ties bro 💯
If only I could do it🤦🏽♂️…oh well catless mid pipes coming‼️ good video bro!
Appreciate it 💪🏽💯
Can this work for the 2016 challenger scatpack? And you don’t leave the springs on right?
Yes
That zip tie ain't gonna melt chilling right by the exhaust? Shit gets hot down there
I thought so too 😭😭 I had look underneath it and was still there but I’m going to check this week
@@HemiTwinz just get some metal cord or something that'll work
Yooo, how’s it holding up, any issues since this installment, thinking about doing this to mine asap.
Mines holding well haven’t change it since I did but I might upgrade to like a 10 gauge wire idk it was a thought🤷🏽♂️
Does this change the tone at all? Or does it just make it slightly louder
@@Tyytyythatguy yeah it does make the tone deeper a little bit
@@HemiTwinzi got the zip ties as tight as they can get and the valve still turns
@@Tyytyythatguy yeah I made an updated video of it and I was using 6 gauge copper wire
So when installing a new actuator do we make sure the valve is open?
Yes,its always open only when engine is warm then system closes this valve
Thanks bro I have to try this on my 392 RT scatpack
Bet that you notice a difference but instead of putting the zip ties do 6 gauge copper wire in place of the zip ties💯
@@HemiTwinzwhere do I get that from
@@HemiTwinzits so many different ones
@Double_G392 Lowe’s or Home Depot
@@HemiTwinz i ordered some metal ones from amazon, so hopefully im good!
I have no cats fully straight pipe but did it sound even better 😈
It’s the only way to go fr🏎️🚀
How long has the plastic zip ties held up?,,,,thinking of going with the metal zip ties
It didn’t really hold up that long that’s why I made a updated of it using 6 gauge copper wire and that’s holding still till this day
Sounds amazing my brother great work
Appreciate it🤟🏽💯
Does this really keep the valves open all the time and if so does it hurt the engine or throw off any check engine lights?
Yes had it in for a little min now and it’s still holding it can hear the difference when starting it up it stays open💪🏽
My engine light turned on
@@robertoascencio5604 what year is your car?
Does a 2015 challenge Rt has this option ? Or only scat packs ? Thank you
@@lupitaochoa4912 the RTs started having active exhaust in 2017 +
Does erry body no what he's sayin?
How about bailing wire
Never tried if you want to give a try Lowe’s 6 gauge copper me was like $3
Does this work on a 2016 charger?
💪🏼🔥🔥🔥🔥🔥
I see that you didn't put the spring back in, does that matter ?
Nah it doesn’t matter I took them out cause it doesn’t serve no purpose
Thanks bro. Are they still working OK ?
@@wb4514 I swap mines with 8 Guage copper like 2 months ago
@@HemiTwinz I’ve seen zip ties made of metal.
@@wb4514 I’ve been trying to get them but they was hard to find then yeah put the metal zip ties on the same way I put the plastic one on
Any engine light ?
Nope I believe if you got a 2017 and down it’ll throw a check engine light
I wouldn’t recommend doing this 😂 it’s open anyways when it’s in track mode
So it won’t work on a hemi Rt 2018?
I did this and left the springs in, better to leave them out because the spring helps the valves open so if you leave them in the zip ties will eventually loosen up and make a new nasty rattling noise
Yeah you’re absolutely right! I came across it making the rattling sounds and replace the zip tie with 6 gauge copper wire. I have an updated video on my channel on it but thanks for commenting on our video every comment could help other people.🤟🏽💯
@@HemiTwinz Fursure! Yea as soon as I seen zip ties I thought of wire instead to make more durable but I didn’t have any but zip ties will do as for rn till I get wire waiting on that update vid💪🏽
Update don’t do this if you don’t like seing your check engine light cuz mines been on since I did it car runs sounds the same just throws a code 2019 and up
@@tworeckless7568 I didn’t get no code when I did mines did you do something differently?
@@HemiTwinz what years your car? Nd no I took the springs out zip tied it it was on and off for a while now it’s just on
I have a 17 RT challenger. If the check engine light is on will it affect the car?
I red up on it and it said it would but I have. Buddy who has 17 charger and he didn’t get no check engine light and no the check engine would not affect it
Quick question Bro is the driver and passengers are both left side
Yes the actuators are both on the left side of the exhaust pipe
And does that make the squeaky rattling noise go away???
Aint that gonna melt inside🤔 that shit is gonna be hot like hell
Mines been holding for a good minute now
@@HemiTwinz u r da man bro , i did it it was awesome difference sinse i removed catalytics and installing down pipe, try it it literally gonna lit 🔥
How much was ur starlight’s ?
I paid for a kit off Amazon it was like $100
Which way is open? Clockwise or counter clockwise
You would turn it clockwise
Good
check engine 😢
Won't a ziptie melt?...
Why can’t you do this on a 2018?
Could I do it on my 2018 dodge charger Rt scat pack?
Yeah???
My bad but another banger all mopars check in to the goat‼️💯🤟🏿
Yak bro soon to be great💪🏽‼️
Does this take out the check engine light?
It’s not supposed to give you a check engine light it supposed to just keep the valves open
So what can i do mine is a 2016 scatpack challenger
Is it from or back I can find mine
In the back buy the resonators
How’s it holding up any checking lights?
Haven’t got a check engine for that I did get a check engine when I deleted my cats
For now
@@HemiTwinz left side was wrong way bro
Bro mines has a wire hanging I wonder if it’s broken
It’s probably ain’t connected or the wire pop from it
Tac welded mine 5 min before doing mid muffler delete 20 challenger scatpack
Wouldn't an o ring be better
Does it work on 2022 R/t hemi
Yeah it would wrk
I wouldnt put it in Eco mode bro. It puts it in 4 cylinder mode and doesnt get even wear on all 6 cylinders. That could give you hemi tick later on.
Oh yea I know bro I ride in custom when I start it up it goes into my custom settings I was showing it for video purposes only yk but thanks man💯
Yesirrrr shitt dead. mds delete the way to go
So I did this but it caused a check engine light on mine… any thoughts
Yeah it could be the year of the car or you have the valves closed
You turn it to the right correct .. and one of the holes for the 8 millimeter bolt plastic broke would that make a difference for check engine light on … I have a 2017 Hemi Rt trackpack
Yeah try doing it with 8 gauge copper wire put it in the same place but the year is maybe why the check engine light came on usually when who does it 2019 and really doesn’t have a problem but 2019 and below has the problem but the check engine isn’t going to hurt nothing you probably just have to clear it everyday if you want to do this mod
Okay and just curious if the valves are closed and I’m driving it would it… ruin the car ?
Thanks for following up as well
why is it make a sound
If i did a cat delete on hellcat will i need to tune it
No
If you add headers then yeah but the rest of exhaust no
Only if you added headers
The easiest way is to pull the #36 fuse right after a cold start.
I have a 2023 RT on order, gonna look for that fuse...
@mxj247 OK. Has to be done right when you cold start. While wide open.
@OG Ghost Daddy that's smart and hella easier
Where is that fuse located?
Will taking the fuse out throw a code
What about the check engine light?
What you want to know about it
@@HemiTwinz how can I delete that, only way is to get the actuator I’m guessing
@@angelortigala2010 yeah I would say the same thing to get the actuator I didn’t get no check engine light on mines when I did it
@@HemiTwinz I got a 2016 probably that’s why
@@angelortigala2010 people usually have problems with the check engine light 2018 and older but the actuators should do the truck fr
I don't see how you are not or didn't get a CEL after doing this. I have always seen the CEL come on for this.
I believe if you have 2019 and up you don’t get one mines never came on.
Well you are tricking the system. With the active the only thing it is looking for is the valve to open and close. As long as the black piece with the yellow gear moves, the system is satisfied.
I have a 2016 scat why won’t it work for me
?
We heard a lot of people was having problems with it like a check engine light comes up for them but give it a try if it don’t work just let me know bro
@@HemiTwinz bet will do
You could in theory just cut that section out and hang the valve up under and secure it. No flap, no checking on it, nothing. That way the flap is gone also.
Until it fails inspection and you have to buy and reinstall another set
Literally just did mine took a lot longer than my big ass expected, but I got it done. Appreciate you posting the video, bro.
Bro, can you tell me that now, No rattle sound .???? Is it gone completely?? what about engine light. Please help me