When turbines are properly installed with a balanced system of intake and exhaust, they should not allow any weather infiltration. The turbine has twenty-one (21) air-foil curved vanes with rolled edges to deflect water. The rolled edges are designed to force the water to run down the vanes & not into the attic. Air-foil means a body designed to provide a desired reaction force when in motion relative to the surrounding area. To summarize, the turbine should be turning at all times when there is outside air movement. The centrifugal force of the turbine also prevents leakage. Centrifugal force is the force that tends to impel a thing or parts of a thing, such as rain, outward from a center of rotation, such as the bearing/shaft assembly in the turbine. It is important that the unit be sealed with roofing cement around all seams, nails, and under the flashing. The part of the flashing that is facing the roof peak should be installed underneath the shingles and the bottom part should be overlapping the shingles. Sealing in this manner prevents water from entering the attic under the flashing. Lomanco vents, including the whirlybird turbine series, that are marked or identified with "Miami-Dade Approved" has passed testing and met the requirements for use in the High Velocity Hurricane Zone (HVHZ). These attic vents are tested at wind speeds of 30, 70, 90 and 110 mph while having a rainfall rate of 8.8 inches/hour applied to the test deck and vent. The first three wind speeds are applied for a duration of 15 minutes and the final wind speed of 110 mph is applied for 5 minutes. The testing is performed by a third-party laboratory that must be approved by Miami-Dade County.
Thanks for the information. I will definitely install the Lomanco Whirlybird.
I have a 30 year old whirlybird and I will have one till I, or the house goes.
Good to Hear!
Won't rain come in through this?
When turbines are properly installed with a balanced system of intake and exhaust, they should not allow any weather infiltration.
The turbine has twenty-one (21) air-foil curved vanes with rolled edges to deflect water. The rolled edges are designed to force the water to run down the vanes & not into the attic. Air-foil means a body designed to provide a desired reaction force when in motion relative to the surrounding area. To summarize, the turbine should be turning at all times when there is outside air movement.
The centrifugal force of the turbine also prevents leakage. Centrifugal force is the force that tends to impel a thing or parts of a thing, such as rain, outward from a center of rotation, such as the bearing/shaft assembly in the turbine.
It is important that the unit be sealed with roofing cement around all seams, nails, and under the flashing. The part of the flashing that is facing the roof peak should be installed underneath the shingles and the bottom part should be overlapping the shingles. Sealing in this manner prevents water from entering the attic under the flashing.
Lomanco vents, including the whirlybird turbine series, that are marked or identified with "Miami-Dade Approved" has passed testing and met the requirements for use in the High Velocity Hurricane Zone (HVHZ).
These attic vents are tested at wind speeds of 30, 70, 90 and 110 mph while having a rainfall rate of 8.8 inches/hour applied to the test deck and vent. The first three wind speeds are applied for a duration of 15 minutes and the final wind speed of 110 mph is applied for 5 minutes. The testing is performed by a third-party laboratory that must be approved by Miami-Dade County.
Good info!! Thanks