Did you see the one before this one? I did something kinda dumb (with good intention). Video 67 had way too much for 1 video. I didn't want to edit it all out so I decided to make a 2nd video. Didn't wanna leave people hanging half way through so I dropped 2 videos early yesterday morning about 30 min apart. Problem is people are only seeing the 2nd one. I even named them Part 67.1 and 67.2 but I guess the way it shows up on people's feed they didn't know there were 2 videos so people are missing 67.1 where I did the step by step valve adjustment and used a trash bag as a valve cover and got oil everywhere lol.
Quit using alcohol to wipe everything down. Get some wax and grease remover or Spraway glass cleaner. And if u paint over something u painted a few days ago, you need to at least scuff with a scotchbrite pad or it won't stick. And before you spray plastic, you need to spray with plastic adhesive promoter. Love your show so just some helpful tops.
Thanks for the tips. I was using denatured alcohol and then recently switched it up to the cheaper stuff. Hadn't thought about glass cleaner but I guess as long as it's zero residue it would work. I've read that some people end up using alcohol after the W&G remover and find residue on the rag that the W&G didn't get. Really haven't had any problems until now. You're right I did totally forget to scuff it before painting, do you think that's why it wrinkled? I rarely use enamel, it seems to act differently. Hey thanks again!
That's what I'm thinking. I did forget to scuff it but before I took it back to bare metal I just had a few areas of wrinkles. I sanded those out and sprayed it and those areas wrinkled along with everything else so idk, maybe enamel off gasses differently. So I released 2 videos early this morning. Scheduled 1 at 2:45am and the 2nd one at 3:15am (because analytics says my viewers are watching from 3am-noon mostly). Anyways most people didn't even watch the first one. I was afraid of that happening. I even named them Part 67.1 and Part 67.2 (instead of 67 and 68). Maybe the feed just shows people the most recent. I have a 40min limit on my software and didn't want to edit all that sh!t out, also didn't wanna leave people hanging till the next day to watch the 2nd half, but lesson learned, just type "to be continued" and don't upload till the next day from now on.
@@FixLife119 that's funny. Both the videos showed up for me I did start to watch the second first, I just stoped it an went to the first one. Yeah paint can suck some times
@@numbskullskills Hmmm, so you knew there were 2? I wonder why other people didn't watch the 1st one. I think the second one started with "continuation of the last video", and I also said something about valve adjustment in the last video. Maybe you're just smarter than the average viewer lol.
@@numbskullskills Oh ok. I just don't get why the first one has less than half the views of the 2nd one. All I can figure is people think 1 video dropped like normal so they played the most recent one. My dumbass made the thumbnails kinda similar. I just thought the 3 digit part number (67.1 and 67.2) would stand out... but nope. Oh well, live and learn I guess.
Hey I caught up on the videos!
Did you see the one before this one? I did something kinda dumb (with good intention). Video 67 had way too much for 1 video. I didn't want to edit it all out so I decided to make a 2nd video. Didn't wanna leave people hanging half way through so I dropped 2 videos early yesterday morning about 30 min apart. Problem is people are only seeing the 2nd one. I even named them Part 67.1 and 67.2 but I guess the way it shows up on people's feed they didn't know there were 2 videos so people are missing 67.1 where I did the step by step valve adjustment and used a trash bag as a valve cover and got oil everywhere lol.
Quit using alcohol to wipe everything down. Get some wax and grease remover or Spraway glass cleaner. And if u paint over something u painted a few days ago, you need to at least scuff with a scotchbrite pad or it won't stick. And before you spray plastic, you need to spray with plastic adhesive promoter. Love your show so just some helpful tops.
Thanks for the tips. I was using denatured alcohol and then recently switched it up to the cheaper stuff. Hadn't thought about glass cleaner but I guess as long as it's zero residue it would work. I've read that some people end up using alcohol after the W&G remover and find residue on the rag that the W&G didn't get. Really haven't had any problems until now. You're right I did totally forget to scuff it before painting, do you think that's why it wrinkled? I rarely use enamel, it seems to act differently. Hey thanks again!
looks good buddy. the wrinkles probably came from it gassing. if its wax itll have fish eyes.
That's what I'm thinking. I did forget to scuff it but before I took it back to bare metal I just had a few areas of wrinkles. I sanded those out and sprayed it and those areas wrinkled along with everything else so idk, maybe enamel off gasses differently. So I released 2 videos early this morning. Scheduled 1 at 2:45am and the 2nd one at 3:15am (because analytics says my viewers are watching from 3am-noon mostly). Anyways most people didn't even watch the first one. I was afraid of that happening. I even named them Part 67.1 and Part 67.2 (instead of 67 and 68). Maybe the feed just shows people the most recent. I have a 40min limit on my software and didn't want to edit all that sh!t out, also didn't wanna leave people hanging till the next day to watch the 2nd half, but lesson learned, just type "to be continued" and don't upload till the next day from now on.
@@FixLife119 that's funny. Both the videos showed up for me I did start to watch the second first, I just stoped it an went to the first one. Yeah paint can suck some times
@@numbskullskills Hmmm, so you knew there were 2? I wonder why other people didn't watch the 1st one. I think the second one started with "continuation of the last video", and I also said something about valve adjustment in the last video. Maybe you're just smarter than the average viewer lol.
@@FixLife119 it said everything I just pushed the wrong one first.
@@numbskullskills Oh ok. I just don't get why the first one has less than half the views of the 2nd one. All I can figure is people think 1 video dropped like normal so they played the most recent one. My dumbass made the thumbnails kinda similar. I just thought the 3 digit part number (67.1 and 67.2) would stand out... but nope. Oh well, live and learn I guess.