Perfect Laser Engraving on Bamboo Utensils!
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2021
- ➡️ Click on Show More↙️for the LASER RAFFLE and other Links!
The Raffle you've all been waiting for! The LaserMATIC 20!
➡️ lahobbyguy.com/lasermatic20
Get a chance to win the King of the Diode Lasers!
The Roly Automation Facebook Group:
/ rolyofficial
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
www.amazon.com/shop/thelouisi...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
The Laser I use most frequently, The Roly LaserMATIC 10: King of the Diode Lasers!
➡️ amzn.to/3oIzOzp
AVAILABLE NOW ON AMAZON!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutfiles.com/
/ lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Need to message me? m.me/105768145045320
Check me out on Rumble! rumble.com/c/c-3325164
=======================================
👉EXCLUSIVE $200 Discount Coupon on the Gweike Cloud Co2 Lasers!👈
If you're looking for a Co2 laser, use my exclusive discount code!
This code is good on all laser website purchases at www.gweikecloud.com/
➡️ Coupon Code: LAHOBBYGUY
(Coupon code not valid on pre-orders of new products)
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com/magnets
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com/4standoffs
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com/bedlegs
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
=======================================
THE MOST REASONABLE DIODE LASER COMPLETE PACKAGE AVAILABLE!
👉 This is a special VIEWER ONLY package deal!
🔗 lahobbyguy.com/package
Laser, Roller Accessory, Enclosure & Honeycomb Bed! $465!!
Take an ADDITIONAL 7% OFF with
Coupon Code: ➡️ HobbyGuy
=======================================
I want to give a BIG SHOUT OUT to all my viewers who are supporting me in this effort! Thank you SO MUCH for your support!
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/lahobbyguy
=======================================
Need to mail me something?
The Louisiana Hobby Guy
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com/lburn
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com/lb-keys
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ The Walnut Road Collection of high grade USA grown and CNC'd hardwood coasters:
www.walnutroadcollection.com/...
info@walnutroadwood.com
➡️ Use Coupon Code HOBBYGUY for a 25% discount!!
➡️ Ocooch Hardwoods:
ocoochhardwoods.com/
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/44TfKGdByI9o
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic10 #ortur #orturlasermaster2 #lightburn #tutorial #Atomstack #Aufero - แนวปฏิบัติและการใช้ชีวิต
![[LIVE] ย้อนวันวานกับนางเอกยุค 90's #คุยให้เด็กมันฟัง EP.42 (8/6/67)](http://i.ytimg.com/vi/MslQDdFwULE/mqdefault.jpg)
You have to watch the *whole video* to see all the tricks to get this perfect! The final step was just a wash and a quick coat of mineral oil. *Thank you so much for your support!*
Rick, bedankt!👍👍👍☘️
Heel graag gedaan!
I'm so brand new to laser engraving you could consider me still in the womb...LOL. I've been watching your videos and (waiting on my D1) and you make sense to me above most of the videos on TH-cam that I've watched. I joined your blog as well. I've a lot to learn on the software that's for sure. You are an excellent teacher and showing your mistakes are just as important as the success. Thank you for the time and talent you share..
Welcome to the obsession Kat! 👍
Wow I am glad I have a camera for alinement on stuff like this.
*That's the easiest way Don!*
So incredibly helpful. I am a newbie and I sure appreciate all the tips.
You are so welcome Lydia!
Really nice work. Got the 60 pak of round coaster and working on the Christmas ornaments. Thanks for your videos, love them.
That is awesome Karl! I love doing holiday stuff!
thank you, Ive been binge watching your utube to learn LB. I am such a rookie, i have so much to learn but your videos are awesome and I can follow them. I have had my laser 2 weeks but had difficulty with LB it would not read my laser. I realized that I had the wrong version by reading other peoples issues. I have since upgrated the program but once again have to wait until LB updates my so I can proceed. Thank you I have joined your forum also.
No you don't have to wait Connie, just click Help --> Check for updates.
Thanks for another great video. Keep them coming!
*Thanks, will do Doc!* The list is long! 😎
They look awesome
Thank you Gladys!
Very nice work. Love your video's!!
*Thank you very much Danny!*
As ever thanks Rich, great info!
My pleasure! Thanks for watching!
Hey there bro. Just followed you. Been using lightburn for a year now but there's still so much to learn. Thanks for your content and everything
Thanks for the sub David! We're all learning as we go!
@@TheLouisianaHobbyGuy you got that right
Another great one Rich. 😁 I haven't tried bamboo yet our DollarTree hasn't had any all summer. Maybe I'll give Amazon a try. Thanks for the video!
Thanks George! The Amazon ones seem to be better. They're more flat than Dollar Tree.
Great video Rich they look great 👍
Thanks George 👍
Bedankt voor inspiratie! 🍀🤩
*Graag gedaan! Bedankt voor het kijken!*
Hey Rich. Very nice video. Cool idea. once I figure out all the thing in Light burn I'll give this a try.
Cheers Fred
*Awesome Fred! You can do it!*
That is a flipping awesome video,,, Nice job
Thanks Steve!
very nice, thank you
Welcome 😊
Awesome video…just wish I’d seen it last week. After getting 2 off-center pretty bad, I ended up putting one on the scanner, importing the scan and tracing it. Measuring would have been a lot easier. I also did a very light burn of the spoon shape into my MDF base before putting it on the tool layer so I’d be able to line up other spoons but I didn’t want to have to do that for all of the bamboo utensil shapes. I’ll be using your multi-pass trick for the rest of them.
*Awesome Lori! So glad it helped you!*
Another great video, thank you, a wee question, where did you set your focus distance?
My normal focus is 20-25mm depending on the material, however because of the lower area in the spoons, I set it to 18mm Jim.
You are an excellent educator! Could you tell me about your base with the spikes?
Thank you! It's just a steel bed with some punk spikes. Links are in the description.
Great video Rich! Do you have a video of the process you do after the burn. The prep, clean, seal ? Any help would be great ! Thank you!
I don't have one, but there is no prep. I spritz them with plain water after the burn and let them dry naturally so the soot stains the wood. They I just wash them with dish soap and apply mineral oil. After that, I wax them with beeswax.
Excellent ! Thank you . I watch all your videos!
The framing technique is amazing, specially for me that I can’t send gcode to my laser I have to use a thumb drive. Awesome advise: how to Frame without using Framing.
Glad it was helpful Victor!
Thanks for sharing!!! Is it necessary that you have the crumb tray for engraving utensils? My Ortur LM 3 is arriving tomorrow.
No need, it was just there. It's just for cutting Deena.
I like your bed. Brilliant idea. Question though, plywood sometimes has a tendency to curl slightly. How do get it to lay flat on that bed?
You don't, you have to use the honeycomb bed with hold down pins or magnets. This bed is only for flat material.
@@TheLouisianaHobbyGuy ok so there is no one bed to rule them all. You need multiple beds in your quiver 😄
Hi! Great Work! But my concern is that, because the item is to be used on food. Will that be safe? Would burn be lighten due to washing and if it does, would you accidentally consume the particles that drops out from the burn?
Hi Kaysee, As with all wood burns that I do, I mist them with water right after the burn and then let them air-dry naturally so the soot stains the wood. Then I wash them and seal them with food safe mineral oil. amzn.to/3juMXpT. After they dry, I wax them with 100% organic beeswax amzn.to/3E87Cbi. So yes, they are safe to use on food. Hope this helps answer your question!
great job once again!! did you sand them?? did you put mineral oil on them after because it might come in contact with food?? Mineral oil is the only thing we should with food .....
Yes I did, I posted that in my pinned comment Rich.
Sorry to ask so many questions. I use the ikea spoons and spatulas. They are beechwood. What would you suggest for settings please. Thanks so much!!!
I don't suggest settings Deena. I always sacrifice one test piece and run a speed and power grid on it.
Hi Rick, thanks so much for the video. It is really awesome! However, I want to know, where did you get that engraving bed you have on the work surface? Did you make it yourself? And if you did, would you please share how it is done. And if it is bought, then a link to the store and hoping that they ship to Australia. Thanks so much for making these videos. God bless!
The links for the metal bed and the punk spikes are in the Show More notes below the video Nesrin. Thanks!
@@TheLouisianaHobbyGuy thanks so much.. I will have a look..
Are those the same measurements for the Dollar Tree Tree spoon?
Yes they are!
Great video Rich. Exactly what I was looking for. Rich do you have a video how to engrave a glass? I'm still fighting with that..if use a masking tape or paint on the surface and how to do setting of power and speed on my diode laser 20W .Thank you in advance for help
No Tony, but I have one on my list! I usually do glass at 1200 speed and 70% power on the diode. I coat the glass with black Tempera first for the best results.
Thanks Rich. I will try that
Is the acrylic same technique with tempera?
@@tonyc6331 Yes Sir!
Another very informative video, I was wondering if there is a way or a font out there to make the letters go in a vertical direction rather than horizontal?
Vertigo can do it automatically, but it just types the font sideways, you still have to rotate it. There are other free fonts for vertical positioning, in other words you don't have the problem with the width being different on letters like M, W, L, I etc.
www.1001fonts.com/vertical-fonts.html
@@TheLouisianaHobbyGuy Thanks for the info. It should be fine.
Now I Guess I have to a video on vertical sign making Rick 😎
@@TheLouisianaHobbyGuy That would be great!!!
*Coming soon Rick!* Keep an eye out and turn on the Bell notifications if you haven't already! 👍
Hello Rich, first, thanks for the explanatory video. What does 'Offset Fill' mean, which does not appear on my LightBurn?
PS.: Another thing: how is the name of this perforated bed (aluminum?) that you use in the laser machine? I live in Brazil and the name must be different.
Offset fill goes around in a circle. So if you had a big circle or square and graphics in the middle, you would put the circle or square on another layer and set it to offset fill. Then the outer shape will keep the laser from scanning left to right wasting time.
The bed is just sheet steel with punk spikes.
@@TheLouisianaHobbyGuy Thanks
Hey, Rich, kind of unrelated to this vid (great one, by the way), have you still been using your "80W" module and if so, are you still happy with it? I am considering getting one and would love to hear from someone with a little time working with it.
*Yes and yes!* Absolutely love it! It's what you see in this video. I even printed a mounting plate for it.
@@TheLouisianaHobbyGuy Ok, that's good to hear. Seemed like an interesting way to squeeze more power out of a diode laser. I'm going to order one pronto. Thanks for the quick reply!
@@ricklepick9148 Email me after you get it if you need the stl file for the new mounting plate.
Do you use the transfer tape on everything you burn
No, I have air assist that I usually don't use in my videos because most diode users don't have it. I only use transfer tape on things I don't want any soot to get on, like leather or fine wood.
where did you get the bed from with the metal spikes on?
Links are in the description.
Where did you get the spike bed?
Links in the description.
Hi guys, I heard that ortur launched a new portable diode laser machine called Aufero, the official sub-brand of Ortur Laser Engraver, Do you think it worth to buy? I'm new to the laser, I heard that Aufero is easily to get started. I really want to buy one.
It's basically an LM2 Pro with a cantilever arm instead of a square frame, and much smaller working size. It's made for desktop use.
Does your laser in this video have automatic focus ?
No it doesn't Kevin.
@@TheLouisianaHobbyGuy Thanks ! Just found your channel and enjoy your content!
@@Firedog105 Much appreciated Kevin!
idk what im doing wrong. my setting match yours and i barely see anything. how do your get it so dark?
Proper focus Hashly. Every laser will burn differently. You have to run a test card on every material to find out your best settings.
@@TheLouisianaHobbyGuy I have to burn it at 35/90 to get anywhere near close to the results you get
@@hashlyhaze2985 I may have used the 10W in this video, I don't remember.
@The Louisiana Hobby Guy my laser came with a focus tool. I feel pretty confident that I'm in focus. I will admit I know nothing about pre-treating anything.
👍👍🏻👍👍🏻👍
Thanks!
Porfavor sustitutos en español gracias
Hago las traducciones 24 horas después de subir los videos.
@@TheLouisianaHobbyGuy ok muchas gracias un saludo desde España
ctrl+D - how did i not know this?
It's the little things that we overlook! 😎