HOW To PROGRAM YOUR ESC In LESS THAN ONE MINUTE! The FAST AND EASY WAY to Program Your Hobbywing ESC
ฝัง
- เผยแพร่เมื่อ 4 ก.ย. 2020
- FAST and EASY Way To PROGRAM Your HOBBYWING ESC. I give a tutorial on how to use the “Hobbywing Program Card” to Change the settings on your HOBBYWING BRANDED or REBRANDED. Drop a LIKE if you feel you learned something from my video!!
- ยานยนต์และพาหนะ
Excellent,,, very informative!!!!! Thanks 🙏
No problem…..Glad you found it helpful 👍😉
Great Video Sir.
Thanks!
Thankyou Brother!!!
You’re welcome 👍😉
Works on Spektrum Firma 150 👍
I wondered if my card would work since it's all made by HW.
Yeah it should basically work on anything made by Hobbywing.
Do these cards always come with the cable to connect them?
I believe they do
Will it work with a Redcat Racing HW-WP-10BL60-RTR-D Hobbywing 60A Brushless esc
Should work with any Hobbywing Product
I have a RadioLink RC6GS v3 and a Hobbywing Fusion quickrun SE 1800kv running on a 2s lipo for now I have a 3s 11.1v coming. Anyway there seems to be a bug when I barley pull on the reverse trigger in reverse the throttle jumps up and down slow then fast ect....I dont know if I have my remote settings jacked up or what. I have a Hobbywing programming card coming would that maybe fix it? If you know how to setup my radio settings could you help?
It could be a connection issue with one of your motor wires or it could be a programming issue…but first thing I’d try is to recalibrate your radio system so it knows where your throttle end points and neutral point are
@@RCKnockout it was A.B.S settings. I didn't know which A.B.S settings to change so I just started playing around with it and eventually figured it out. She runs like butter now!
@@RCKnockout now I just need to figure out how to assign buttons but I can figure that out as I go.
@@RCKnockout I'm just wondering now, when I change to a 11.4v if the esc will accept it or if I will have to change a setting I'm running 7.4v 2s right now. Still waiting on the 3s to be delivered. Oh I absolutely hate the battery tray in the E10 and the gears provide a dangerous situation.
@@Webb4RC nice! Glad you got it figured out 👍😉
I wonder if those low low voltage cutoffs are for ni-MH battery packs.
Low voltage should just be for Lipo batteries I would think 🤔
There is a setting that turns off low voltage cutoff if you are going to use ni-MH packs
Works on Spektrum firma 160 Arrma 8S ( have to use the owners manual not the card for items and values )
It must be a rebranded hobbywing made for Arrma then.
Yes, I had to use the manual too, the Infraction manual.
The manual that came with my warranty replacement ESC was different too... There's the retail version ESC and the Arrma one.
@@LiquidSSSnake that makes sense since it’s rebranded for Arrma.
Can you post a link to the program settings for the esc
Bryan Dunn sorry I don’t have a link for that. I can’t remember where I found it. Your best bet is to type in “Redcat Kaiju esc programming” or look up the “Redcat Kaiju owners manual”
So if I get like a eBay esc and brushless motor can I link my tqi remote to it
Yeah you can use basically any esc and motor…..all that matters is linking the transmitter and receiver
@@RCKnockout so what do I need to buy?
@@1994RALLY basically any brushless 3s capable system with a similar (kv) rating to the stock electronics will work
@@RCKnockout I’m gunna give it a shot
@@1994RALLY go for it 👍😉
What does it mean when you only get lines and no numbers?
Sounds like it’s not getting a connection
@@RCKnockout My esc is a Xerun XR8 sct. Is it compatible with that model.
@@SweetTooth10 I would assume so
What controller is that mate? Thanks
It’s the Futaba 4PV
@@RCKnockout nice one 👍
Why it don't work in my arma typhon 3s
Is it a Hobbywing Esc? Or Spektrum Smart Esc? I don’t believe it will work with any Spektrum branded esc’s