HobbyWing Programming Card Hack: The Old Brushed - Brushless Switcheroo
ฝัง
- เผยแพร่เมื่อ 25 มิ.ย. 2021
- So I went to use my HobbyWing programming card to take some brake force out of my new MAX10 ESCs only to find that I had a "brushed" version programming card. In this video I show you how I got out of purchasing the second... VERY SIMILAR... DARE I SAY, EXACT SAME CARD AS THE ONE I ALREADY POSESS... Do not do what I do in this video however... it was very stupid and could've broke my sexy new ESCs... could've.
Just in case you are not a cheap sh!t like I am, here is the link below for the HobbyWing Programming card.
BRUSHLESS:
www.amazon.com/HOBBYWING-Prog... - ภาพยนตร์และแอนิเมชัน
![CAMPปลิ้น | EP.77[2/2] "รับทราบ" แก๊งเพื่อนรัก 10 ปี ที่ไปไหนก็มีตำนาน!](http://i.ytimg.com/vi/ifc0ofD51B0/mqdefault.jpg)
This works for my Dynamite card too! I literally just tried it on my brushed Hobbywing ESC! Really cool! I just earned a new truck full of new features. Thanks dude!
I saw that too.!! The Dynamite looks exactly the same.!! So it works too.? That's effing awesome.!!
You can tell that this works. The brake force clearly changes in the test. Can’t wait to see tomorrow’s test. Good video Brian
I know.! I just tried to run the truck and got rained out. I'm checking the footage now to see if I have a video or not. Many thanks my brother.!
I always thought the cards just had a different label but the same unit. Cheaper for Hobbywing to just produce a new label.
Here's the REALLY crazy part... u just found a Dynamite brand programming card that is identical to these other two. This one is made for Dynamite ESCs. It also looks like it would work for these Hobbywing ESCs as well. That would be pretty crazy cross platform action right there.! Thanks for the great comment my brother.!
Brian, that is officially MAD GENIUS!!! 🏆😁
I can easily see how that works, without THAT much risk (but a LOT of cross referencing).
Believe ME - I understand the value of saving $16! Many people today won't...
I may have both Hobbywing Brushed and Brushless Motors and Programming Cards.....
But I've only got one Brushless Card. Should I lose it - you've just shown me that I'm NOT stuck! Thanks!!! 👍👍💯😊
Hey Car, really loving your great comment.! Still dying over here.! 😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣
My crazy cross referencing seemed endless at times. I actually shot the video twice. You may have notices the changes in the video midway through. Subtle but there...LOL. It made for another great blooper for my collection. None of my button presses were corresponding to what I was saying for three minutes of filming.! 😂 it was hilarious.!
I am very excited to get this car out on the road this morning. I am testing not only the brake force, but the initial punch as well. Stock this was set at 75%. I set it to the lowest(25%) for the speed runs. But as soon as this speed run sessions are over, I plan to set this at 100% so I can perform some super dirty burnouts.!
Thanks Car.!
Great information Brian . Great video to..have a great 4th buddy.
Hey you too my brother.! Thanks a bunch.!
Thank you for the sweet hack👍👍💯💯
This is a good one.! I will use the hell out of it, including this morning. I'm taking it out with me to the site to test things out. I am adjusting not only the brake, but the punch as well. Keep you posted. Many thanks my brother.!
Thank for sharing🙏
No problem.!! Many many thanks for the comment.! Greatly appreciated my friend.!
@@AMAZINGRC ok you're welcome👍🏼
Fantastic job Brian. Great idea for those guys who might have to order this unit and wait for it to return. I figures we could do something like this .. But never tried it or had to. THanks for sharing bud..:)
That's kinda how it happened here with me.! I just didn't want to wait. Don't get me wrong, the 8-16$ helped my decision as well. But time is so hard to come by nowadays.
I cant wait to get out and test this truck. I have adjusted not only the brake force, but the initial punch as well. If I am correct about the punch feature, this will prove to be an important element to this build. The stock punch was set stock at 75%. This means that after I use this car for speed runs, I can set the punch at 100% and do some cool burnouts.! Right now I have set it to the lowest (25%), anti-burnout setting for the speed runs. This may all prove very beneficial. Many thanks for the great comment my brother.!
I used my hobby wing card on brushed and brushless,after i hooked it up to a esc i just instructions for that esc and went down through the list,to me it was much simpler than worry about the labels on the program card
Super smart.!!! Why buy a second card.!!
Hobbywing actually sells a version of this 'card' with a set of stickers, so you can match them with your ESC type. So, yes... they are identical.
www.aliexpress.com/item/32771196447.html?spm=a2g0o.productlist.0.0.336221c7IENtpz&algo_pvid=0a332ac5-416d-4c97-bbf8-3b086b94dbb7&algo_exp_id=0a332ac5-416d-4c97-bbf8-3b086b94dbb7-40
OMG, I actually saw this online and walked right on by not concepting what I was looking at. Many thank for pointing this out to me. And many many thanks for the link. I will make an amendment to my video. I will also give you the credit. Wow, thanks again.!!
@@AMAZINGRC no worries. BTW, this also works with the white label WP880 RTR ESCs you find on AliExpress. These are dirt cheap brushed ESCs.
@@gbraadnl very cool.!! I knew I was on to something here. But it took me a couple hours to get my card figured out. And i still had questions when I was done.
@@AMAZINGRC I am reverse engineering the protocol, so this can be used with an Arduino or similar in future. Will keep you posted. Anyways, thanks for the video as you do save people from shelling out money for something they already have.
Any of those LCD based cards will program any of the hobby wing ESCs without any problem.
LOL, where were you while I wasted three hours of my life figuring this all out.?? I am pretty sure I will never get this time back. And to think I was a smarty pants.! 🤣🤣🤣
Really appreciate that great comment my friend.!!
I had no idea
I stumbled upon it myself.!!
Great video bro 👍👍💪
Many many thanks my good friend.! 🏎👍
good stuff
Many thanks my good friend.! 😎👍🚀
WOW, very cool, thanks :)
Thanks for sharing Sir👍
Anytime 😊
Awesome
I am thinking so.!! 😂 many thanks.!
L18 thanks for sharing
Hey really appreciate that my friend.!! Much more coming soon.!!
Cool video👍👍👍
Hey thanks my brother.! 🚀😎❤
LOLsexy new ESCs.
Bro these are my babies.!! And the motors are their babies.!! 😂🤣😂🤣😂🤣
How do you get the 1 1 lines to pop up? On mine it’s just 3 dash lines across everything and it won’t do anything else.
I'm not sure... I tried to get the same result by plunging things in in different ways but kept getting the same thing... sorry, but you got me on this one. 🤔
This just saved my butt Buddy
I discovered this on accident.!!
@@AMAZINGRC works beautifully for the max 10 brushless esc
Do you know if the blue programing card work with the brushed esc
Yes it will. It's just that the programm8ng is different between the two. They actually sell a package with one card and three faceplates. I looked the functions up online to figure out what I was doing.
Does the Brushless ESC programing cards work with the Brushed version though?
Yes.!! You can actually purchase this card with multiple face plates.!!
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂