How to build yard master 10x17 t garage/shed part 4
ฝัง
- เผยแพร่เมื่อ 26 ธ.ค. 2019
- Yard master garage 10x17 t part 4
BACK and SIDES panels build, this is only the BACK AND rear 2 panels the FRONT 2 WILL be same thing only differences you will need to use different types of frame components, you can find installation instructions on www.yardmaster.com websites or type YARD MASTER garage ANSEMBLY instructions on Google and choose your garage size/ type and download it.
You did a fantastic job, how did you fix the triangular sections to the back wall.
Hi! When I ANSEMBLY all the parts on the TRIANGLE PANEL I kept all the screws loose. After I've got everything in place I mount the PANEL in his place ( on the TOP of rear wall panel of the garage) making sure the holes are almost aligned. I started from MIDDLE off HOLES (PANEL) with the biggest screws (with10 millimetre washer on INSIDE the garage ; at this point you should have 1 person INSIDE and 1 outside pushing the screws), going 1 HOLES to LEFT and 1 the right until all the holes was full. Then with smaller screws.
PS. MAKE SURE YOU KEEP ALL SCREWS LOOSE UNTIL YOU HAVE ALL THE HOLES FULL WITH SCREWS! EVEN ON THE TRIANGLE PANEL! THAT HELP ME A LOT ALIGNING THE TRIANGLE TO BACK WALL PANEL! Because it is hard to keep the HOLES aligned and to put the screws in at the same time, What else I did to keep the HOLES aligned ,until I fit the screws in , I put a screwdriver in the next hole where I wish to fit the screw. (The screwdriver kept the HOLES aligned until I put the screw in) .This was even more helpful! Hope this help you.