YardMaster Shed Assembly and make it HIGHER
ฝัง
- เผยแพร่เมื่อ 18 ส.ค. 2020
- This is the preparation and install of the Yardmaster 13x10 shed and how I modified it to give more head height.
Here is a (commissioned) link to the site I bought my shed from:
scripts.affiliatefuture.com/A... - แนวปฏิบัติและการใช้ชีวิต
![เปิดบ้านสุดหรู "เเจ็ค the ghost" ลั่นถ้าป๋องกพลลำบากผมเลี้ยงเอง!! l [Nickynachat]](http://i.ytimg.com/vi/1xbW4vULqGc/mqdefault.jpg)
Nicely done- that's exactly what I've to do with my shed- I even have to lift it up higher- thanks for the video- I've a lot to think about and do now.
Well done, especially with the doors. 👍
Great video..I am 71 and decided to buy this shed.I know there are a lot of negative comments about it but I have worked in tools all my life so looked at it as a kit of parts I could build a shed with..No problems so far till I saw your very informative video.I binned my old shed with 4 trips to the tip and then laid a base of worktop pallets 3 mtrs long I think..Two did the job but I had 3 so plenty of packing wood spare.Now as its vertualy the same size of the shed base I should not have problems with under water ingress..Then I realised your problem with height but as I am only 5,7 and my wife is 5ft in her shoes so it should not be such a big problem..So I have laid the base pallets and levelled them and now realise we would have to step up into the shed so hopefully miss our heads as we step up through the door....Now to finish the build and decide wether to raise up 4inches by lieing fence posts down under the walls...Nice work stay safe Ian.
Great video. I was also looking for a shed like this, but i found it also way too low, but never thought about this way to fix that. Thank you mister, very inspiring!!!
Me to
great video was going to get the same shed but the work you had to do with the height has put right off.
your building and problem solving is A1
thanks loved the video
I have the same problem since I am a tall guy. Thanks for your video!
I almost did the same but I used blocks under the door so there is a step up and down, but if it wasn't for this I wouldn't have even started as there just to low. So thank you so much :).. I also fitted rivets where the panels join.
I've really enjoyed watching your video and picked up loads of hints and tips along the way. I'm looking for a metal shed because some kind person set my workshop afire one morning last year at 3am... Lost all my machinery, tools, lathe, pillar drill and loads of other gear I've collected over the last 45 plus years. Approximately 9 grand +. Wasn't insured because it was a separate building to our house and attached outbuildings! Lost my new boundary wall & brick paving which wasn't in with the £9,000!!! The firemen told me that they had been to four other fire's in the general area. I'm disabled and housebound so replacing the workshop, machinery, tools is virtually impossible but I'm going to give it a good go.
Your video is going to be really helpful. I'm hoping to get the 8x10 version with double doors. The only problem is that it won't have any skylights or windows but a couple of strip lights will sort that out. How's your shed coping after the first couple of years of weathering and general ware and tear? The add additional height and extending the door is an amazing idea. BIG THUMBS UP ALL DAY LONG MATE.
Thank you for sharing your video, take care my friend 👍😷👍
Thanks Penfold, Sorry to hear of your problems on the previous workshop. My shed is going well after two years of wear and tear and the extra height has been very helpful. thanks for your comments All The Best.
Great video. I happened to have bought the same shed. On the doors it says to use #9 bolts and nuts which will avoid the sharp edges and for the smaller screws you have these little black rubber/plastic caps you can screw on.
I've been saying I need to make the new shed I'm getting higher by doing exactly this! But everyone can't picture it lol, Thanks now I can get too it
Well presented video :) Previously I raised one by 400 mm (2 blocks) but took the easy way out as it was just for storage (no mowers etc) abd had a threshold to step over. My present metal shed I moved the sliding door "outside" so as to have the wall space for screws/bolts storage racks. It is only 6x4 so space important. Well done again
Thanks
That's what I'm going to do going to put 1 up next summer to use as a gym 10 x 15ft on top of 2 cours of blocks and just step over the blocks such a shame they make them so short
Great job, adapted it nicely.
Thanks John
Absolutely brilliant on how to raise the shed, the ones around that size are always too short.
Great video
I've just bought the same one,the video on TH-cam says to assemble the roof first which I've done but now I've got to get my wife and 4 kids to lift the bloody thing on, absolute nightmare lol
The roof frame is assembled onto the roof, but the roof plates and ridge are put on after. well that`s the way I done it. Hope it worked out for you anyway Thanks
In between 2000 and 2003 sheds were made without floor and their base were ordinary grass. Certainly now sheds are more suitable. Thanks for the view nowadays.
I did the same as it was too short for me to use never mind the door .so I built a square box and raised it up . But now it like a sive with all the water coming in from the roof .
Nice work, I have noticed tough that very noisy yard you have there.. next to a very crowded road..Anyway it is looking even better having that block base
Thank you for this superb tutorial, your excellent detail and calm, patient demeanour got you through a natural disaster and irritating manufacturing misalignments.
These sheds are ludicrously low for their capacity and your very well considered upgrade to extend the height was a sensible answer to that problem.
In identifying and overcoming these design and manufacturing deficiencies you have hugely increased the knowledge base of DIY shed owners and enabled them to improve their shed considerably.
Thank you Felix Cat for such a nice comment, glad you liked it.
great idea to raise on blockwork, also will be better for stopping water getting inside
Not true. Makes no difference unless your garden is flooded, but it would still come through the doors anyway… he did it for height reasons
I would love to see how you did the door stop by stop. Beautiful shed! Congratulations!
Thank you Claudio, I hope to upload more videos soon and I will make one that explains the door changes.
Great video I’m doing mine hopefully exactly how you have done yours just getting all the material at the moment and the door extension is a great idea just order bits to do that as well.
Thanks Hope it goes well
I enjoyed watching this video and was impressed by your attention to detail and the adaptions to enhance the head height. Sadly I have watched 'cowboy/Mickey Mouse' builders' erect exactly the same shed in my next door neighbour's garden over the past few weeks (they've had probs with the weather) and they've made a complete eyesore of a construction. It is so out of square with a crappy base to sit upon. I will now have to observe this for evermore from our upper windows. Fortunately our garden has high foliage so we don't have to suffer from ground level. Well done you.
Excellent video, many thanks. Would you consider adding video of the additional framing to extend doors from the inside, as that's a tricky bit for me.
Thanks Duncan, I hope to start posting more videos soon. I can record the bracing arrangement for the extended plate if that helps. I`ll look into it shortly.
So this seems to solve 2 problems with these shed a) the height and b) using the blocks gives a water tight seal On the base!! Nice one
Thanks, but the 1.2 metre door opening may be less water tight, but I`ve not found too much of a problem as the base slabs are surrounded by lower level lawn.
great video thank you so much.
Great video, thanks for going into detail. Im looking to get 2 x yardmaster 10ft x 17ft sheds and have them side by side. I have a large grass area that needs to be prepared as I will be storing 2 cars and motorbike/ride on mower so need it to be solid. How has it been in the wind and did you cement the breeze blocks to the slabs or how did you secure them? Thanks
Thanks for your comment. Yes the breeze blocks were cemented onto the slabs and with the four corners and two midway points the blocks were laid flat and the shed screwed into the blocks in each corner using the Yardmaster fixing and I also bolted it down in the two midway points. Absolutely no problem in the strong wind that we had around here. Good Luck.
@@bristolbadger8305 what type of Concrete blocks did you use ?
@@lildeanc Hi, I used aerated blocks as it was only one course high and had the strength for this purpose Thanks
Hi, Great video and a brilliant way to get round the height issue. Do you get any water ingress from sliding door and does it condensate a lot.
Thanks, I have not noticed any water ingress and very little condensation.
Great video! Was going to extend my shed up using blocks and i am going to copy your idea with the metal sheets. Do you think a Rivot gun would do the job? Would have been great to see the sliding doors from the inside when it got finished 👍
Thanks for your comment, could be a good idea to rivet the panels I never thought of that option, you`ll need a great many rivets. Sorry I didn`t show the inside of the doors, but they still run smoothly perhaps I`ll add it to a future video.
Bristol Badger, could you do a quick video from the inside of the shed just so we can see how you installed the bottom rail/door tracks? Many thanks pal. Nice build 👍
Thanks, I have not uploaded anything for a while now but will try and do a `short clip` of the door runners soon
Nice build, thanks very much for taking the time to share your experience. Any problems with rain under the doorway ?
Thanks Gary, No problems with rain under doorway as the patio stone base protrudes only 15cm all round the shed so the rain don`t have chance to build up, and the threshold strip will also stop too much getting in.
@@bristolbadger8305 Nice one thanks. Researching my first shed so soaking up other's experience of them. Yardmaster seems to be a great choice but a bit of an exacting build from some reviews. They have a yardmaster YT channel now so that's something to go by too.
I might make a video of my process when i get started, probably be a comic tragedy though :)
very useful video. are you able to expand a bit more on the extension of the doors? and the runner guides please?
Yes, I bolted a sheet of stainless steel to the bottom of each door and attached 15mm box section aluminium to strengthen the area where they come together. I also added the same size box section along the bottom of each door to glide within the threshold channels. The threshold strip is from the original pack but ground off of the fixing plate and screwed into the floor. Thanks
Very well thought out and useful video. Found this interesting how your raised the shed. Have you had any problems of water ingress at the bottom and along shed to breeze blocks surface?
Thank you Koysii, I`ve had no problems with water ingress around the blocks. The base is slightly higher than the surrounding lawn so it will not `flood` onto the base slabs.
@@bristolbadger8305 that's great I'm hoping to get a metal shed myself soon. And when weather permits just been rain rain rain and more rain all month.
@@KoysorMiah That`s great, hope it goes well.
How are these sheds with the wind? I hear thay can be abit rattlely. Do you get water build up on the concrete block or doese the shed provide enough overhang to stop that fom happening?
I`ve had no trouble with the high winds we get around here. but don`t leave the roof off for any period of time when you assemble it.(as you can see in the video). There is no rattling of the panels as they are well screwed down.
The base slabs have a slight incline from front to rear, which takes any water off to the ground at the back of the shed.
@@bristolbadger8305 thanks. Ive ordered one and will probably do the samevas you have. Because of the hight issue.
Thanks a lot. Product of factory in Draperstown, Magherafelt N.L. ? I worked there.
Northern Ireland not NL
Does your shed leak from the roo onto the floor then inside from the blocks...
I've done same thing same shed an size, mine has water falling off the roof on the side an into through the blocks...
I`ve not had any water getting into the shed, there is only a small border of patio stones beyond the shed base so I don`t get any build up of rain water around the base.
Hmmm that's strange I get water off the roof on to floor then into the side of my shed... strange...
I have a metal base which I may have to use. An put some plywood on top ....
In stands to reason that it is possible to make sheds higher, but the problem is the wind. The higher - the windy.
What kind of blocks did you use to add the extra height to your shed?
Standard 9"x 4" Aereated blocks
How does the wind effect the side panels when it's windy? Do you get a lot of movement? Does it make a lot of noise?
It gets very windy around here, as you can tell from the problems I had when it was part built, but now that it is complete the side panels and the whole shed is sturdy and not noisy at all.
Great vid, thank you. I’ve just ordered a yardmaster shed and intend using slabs like you did, Could I just ask if you have had condensation issues inside the shed? I’ve just read several posts about bad condensation inside metal sheds and I’m wondering if I have made a mistake ordering one. Very grateful for any advice please.
Barry
Thanks Barry, I`ve been using the shed for a couple of years now and have not had any condensation problems. It is fairly well aired at the junction of roof/walls so perhaps that helps. I`m sure it will go well. Thanks again
@@bristolbadger8305 many thanks.
Great video. You have great patience. Your base must have come near the purchase price of the shed. Did you seal the apex of the roof? The shallow angle would make me beleive that wind could blow rain in there. Also, are you getting much condensation? I am in the middle of building the bigger yardmaster 10ft x 17ft which doesnt require the extra height but as I'm going to store a lot of stuff in it I dont want the possibility of damp ingress. I will also put electric ( and maybe water!) as I would like a small work area in it.
Thanks Trevor, Base was simply a jumbo bag of sand, few bags of cement and about 20 additional patio slabs to add to the ones from the original shed. I didn`t seal the roof apex and have not found any ingress of rain anywhere around the shed, but I`m not storing sensitive stuff in it. I`m surprised that you have the headroom that you need. I wanted to put some 2 mtre high shelving in mine (and walk around) and now I`m very happy with it. 👍
@@bristolbadger8305that what I want to do but on a concrete base and I'll insulate it too.
In shed description it says assembly 4-6 hours estimated so going by your video it takes a lot longer than that then? (even without the problems & making it higher) Great video by the way.
It possibly can be done in 4-6 hours, if your base is prepared and you are happy where each piece needs to be assembled. I spent some time checking the pieces with the instructions. Thanks
How many days take to install it completely. Would you tell me please? And how many people I will need to do this .Thank you.
The ground preparation took a couple of days and the assembly another couple of days, but it could be done in a day. I had help lifting the unit onto the blocks and the roof assembly, but most of it I done alone. Don`t leave it with the roof off for too long as it can get caught in the wind. Thanks for your question.
What is name of concrete. I need to do same
Hi putting the shed on blocks is a stroke of genius. I have this shed on order coming in the next few weeks. Any chance I could have the dimensions of the blocks from the outside, so I could prep the blockwork, so it's ready for the shed. Thanks
I would recommend that you check your shed dimensions before starting the prep work, as I`d hate to give you my dimensions and then you find your shed will not fit onto the blocks. Perhaps build the bottom run and chalk the base in situ as I did in the video. but for MY shed the outside block sizes are 287cm(w) x 389cm (l). don`t forget to leave 120cm for door. Good luck.
@@bristolbadger8305 That is very helpfull thanks very much. I take it the blocks laying flat are exactly in the middle of the sides?
@@Ryan-kg2fv yes, each corner and in the middle of each longer side (6 positions total)
@@bristolbadger8305 Well started my build today the only thing I've done different to you is added a row of bricks on top of the blocks for a little more height. Just wondered if you sealed the shed once you plonked it on top of the block to stop water running in. I'm half tempted to muck it on or just use trusty old silicone.
@@Ryan-kg2fv I didn`t seal the shed with anything, just bolted it down into the blocks in six places. Shouldn`t get much water ingress as the roof sends most water off to the sides. but a seal could be a good idea. good luck
I think the shed height is to conform to Planning Permission - above 2.5 metres you need to apply for Planning Permission.
Floor to top apex of the shed is 2.22m with the shed on the blocks, so you can see how short these sheds are without giving it more height. I think the planning regs are 2.5m to the eaves and 3m to apex.
These sheds tend to be only 1.89m high! So raising on blocks is a good idea.
May I ask what height you are? I'm thinking of getting one of these sheds and hoping I can get away with not raising the height as I am only 5ft 7" anyway
The standard height from threshold strip to top of door opening is approximately 61" (5ft 1"). mounting it on blocks has given me an opening height of approximately 70" (5ft 10")
@@bristolbadger8305 That's good to know, I'll probably be able to get away with just ducking under the door then, thanks a lot mate!
From my point view it would advisable to info first in instructions where to start assembly from, meaning 1 - floor, 2 walls, etc.
I'd have sited the shed by the road to screen the traffic noise.
Does this shed leak a lot?
No problems with any leaks
That has to leak at the join om top of blocks. Plus, one skin of block around the base has to carry damp . Blocks soak up water. It's why we put in cavity in houses. And you used aerate blocks. Even worse for soaking up water. Good job on raising it however I know it'll definitely be damp at the base or worse, let water iron top of them blocks.
Yes, I think the same. Surely damp gets in there somehow. I'm a small builder and can't see how there'd be no damp.
@bristolbadger8305
Can you add to this. Any pics of the joins
Another armchair builder. Funny, I thought the guy had built a shed, not a house. He's not going to live it.
@MadLFC No armchair builder I'd say. I agree! You build sheds not to be damp or leak. If I have to explain why to you then your as daft as I thought. Even thou it's a shed, you don't want any sort of damp in there at all.
Nice build, but if you didnt put a condensation barrier between the blocks and metal it will be damp.
I really can't stand it when people say they thought it was taller or shorter or bigger or smaller.. Like do you not read the description of the items you're buying before purchasing it?? Like wth.. 😂
I'm with you on roof height.. the world is made for guys 5' 9" or 10".. from lawn mowers to snow blowers.. if your 6'2"... your are forced to be stooped over.. it sucks...
it would have been easier to dig the floor out
All that effort for a crappy yard master shed
How much effort does it take you being a snob and insulting another man's excellent work?