The best part is that you can predict the problems that may be encountered and give advice. For example, if the car didn't start after I changed this filter, I would just sit there and not be able to do anything. Thank you man.
Well done!!, I wouldn't start the engine without the air filter attached first though, It's not like anything is going to break, but any bit of dust or whatever the intake hose can suck accidentally is going directly to the turbocharger, I'd rather not!
مشكور ولكن عندما ارجعت الفيلتر يجب ترك انبوب الوقود الاخير غير متصل وتقوم بالضخ بمضخة الفيلتر حتى يخرج الوقود المخطلط بالهواء ثم ترجعه الى مكانه هكذا يدور المحرك من الضربة الاولى.😊
What kind of engine oil are you using on the O rings/gaskets? Should i just use the same type of oil my engine takes? It seems a bit weird putting engine oil where fuel will be
Hello, we used fresh engine oil(10w-40). Yes you can use same type of oil your engine takes just make sure you put only a thin layer of it. Oil on filter o-ring ensures that dry friction will not interfere with full tightening also it creates a better seal.
![KRK - ชนิสรา Ft.WanMai , N/A [Official MV] Prod. By Sakarin](http://i.ytimg.com/vi/C-WMwwYobcU/mqdefault.jpg)
The best part is that you can predict the problems that may be encountered and give advice. For example, if the car didn't start after I changed this filter, I would just sit there and not be able to do anything. Thank you man.
Very well filmed with total clarity. Thank you.
Well done!!, I wouldn't start the engine without the air filter attached first though, It's not like anything is going to break, but any bit of dust or whatever the intake hose can suck accidentally is going directly to the turbocharger, I'd rather not!
There are no turbochargers on a 2002 Corolla
That chain wrench is the shit😂! Tks
Have a 1999 Toyota rav4. Good to know
Would this be the same for a 2003 Corolla cuz mine is starting cranking quite long when it's cold and been sitting for a few days Thank you
Is this the only way to removing it I’m assuming?
How to change Diesel otomatic Corolla PCV valve 1.4 d4d
Hello! I also change this fuel filter myself.
tell me, please, why BluePrint? what manufacturers of filters would you recommend for use in such cars?
Great video thanks!
I have the same toyota been having issues with code p0400 any advice that could help?
Egr.
I change my filter but the light on the dash still on. Any solution. 2c engine
great job
مشكور ولكن عندما ارجعت الفيلتر يجب ترك انبوب الوقود الاخير غير متصل وتقوم بالضخ بمضخة الفيلتر حتى يخرج الوقود المخطلط بالهواء ثم ترجعه الى مكانه هكذا يدور المحرك من الضربة الاولى.😊
Atleast it’s under the hood. 10th gen is under the backseats. I’m dreading replacing it
Thanks
What kind of engine oil are you using on the O rings/gaskets? Should i just use the same type of oil my engine takes? It seems a bit weird putting engine oil where fuel will be
Hello, we used fresh engine oil(10w-40). Yes you can use same type of oil your engine takes just make sure you put only a thin layer of it. Oil on filter o-ring ensures that dry friction will not interfere with full tightening also it creates a better seal.
👌👌
Дякую
That's an 8th generation Corolla. 9th generation is 2003-2008.