Y’all missing the point. Act as if the precut bolt isn’t and it just so happened to snap on you. Then proceed. You people are impossible. Great vid bro.
There is no way a bolt that size snaps, but that tiny bolt extractor could break through the rust. The bolt extractor shaft is a fraction of the diameter of the bolt. A proper extractor would be near the same diameter of the bolt to even have a chance of breaking that bolt free. This bolt was definitely cut or weakened to get it to shear so easily.
Look close they took to a bandsaw like a haking saw it leaving lines of cutting they cut between the threads on each side enough to snap it that's why they took the flap wheel to clean it a bit smooth off imperfect surface so they could drill it if this were real it probably shear with a point that's how most of mine shear with a point like breaking a drill bit point is this is fake no fire no oil
@toolsforwork I'm in this situation right now. I accidentally sheared my bolt off to my crankshaft position sensor while on my back would thia help me?
phải nói rằng mũi khoan này bạn rất khó khăn khi thực hiện lấy ốc ra khỏi bàn ghế bạn cần phải dùng sức mạnh vừa phải biết cách làm nếu không loay hoay mãi mà vẫn chưa song đâu nhé,😊😊
I broke two bolts that tighten the ignition coils and one valve cover gasket bolt. Now need to buy used drill from Facebook market. I did not find socket for extractor to the 1/4-inch rachet. Hope it can be done with adjustable wrench to rotate the extractor.
@@toolsforworkif you shear off a bolt head that size 7/8 ish you would need 1000’s of lbs of torque to remove it, that little extractor used with an adjustable wrench wouldn’t work at all 😂
@toolsforwork don't know. Just recently. Bolt broke tap a spot for my bit. Drill a pilot hole, extracter just spins. Yes I'm going in the right direction
@@michaelpurcell2103depends on why the bolt broke, what's been done prior. I've had bolts that snapped because they are so old and rusted, but weren't actually stuck, and had to back out the rest of the bolt with an extractor.
Y’all missing the point. Act as if the precut bolt isn’t and it just so happened to snap on you. Then proceed. You people are impossible. Great vid bro.
Thanks!
They be doing to much b😂
There is no way a bolt that size snaps, but that tiny bolt extractor could break through the rust. The bolt extractor shaft is a fraction of the diameter of the bolt. A proper extractor would be near the same diameter of the bolt to even have a chance of breaking that bolt free. This bolt was definitely cut or weakened to get it to shear so easily.
It was cut and disconnected, but the missing part was also taken out by the extraction tool.
Look close they took to a bandsaw like a haking saw it leaving lines of cutting they cut between the threads on each side enough to snap it that's why they took the flap wheel to clean it a bit smooth off imperfect surface so they could drill it if this were real it probably shear with a point that's how most of mine shear with a point like breaking a drill bit point is this is fake no fire no oil
Bolts that size and bigger break more often than you think.. you’ve never done undercarriage work on track machines
@toolsforwork I'm in this situation right now. I accidentally sheared my bolt off to my crankshaft position sensor while on my back would thia help me?
Bolt was already cut before he put the pliers on. The grind marks are a dead giveaway.
Really?
What’s it matter it’s just a video showing how to use extractor bits lmao
@Ohrank exactly, it's just a video. What does it matter to you? Lmao.
@@Ohrankwhat does it matter to you?
@@jrromo6993Why are you getting your panties in a bunch over a video on how to extract a screw.
I broke off the extractor, now what?
It won't drill, it's too hard. Not enough to grab, with vice grips, I'm screwed.
Try welding
Might need a diamond bit
@@dariusdise If I got diamonds, I got the money to hire the work out.
So first cut through the bolt, then tighten it to snap it off, then beat in a stud extractor and remove with an adjustable 😂 nice.
normal process 😊
phải nói rằng mũi khoan này bạn rất khó khăn khi thực hiện lấy ốc ra khỏi bàn ghế bạn cần phải dùng sức mạnh vừa phải biết cách làm nếu không loay hoay mãi mà vẫn chưa song đâu nhé,😊😊
I broke two bolts that tighten the ignition coils and one valve cover gasket bolt. Now need to buy used drill from Facebook market. I did not find socket for extractor to the 1/4-inch rachet. Hope it can be done with adjustable wrench to rotate the extractor.
OK, But you can check it out on AliExpress
I hate it when I snap a bolt and it looks like someone cut it with a zipcut
But how to remove the broken bolt is really a problem.
@@toolsforworkif you shear off a bolt head that size 7/8 ish you would need 1000’s of lbs of torque to remove it, that little extractor used with an adjustable wrench wouldn’t work at all 😂
Di toko apa belinya?
I hate when a customer uses a zip cut to remove parts and brings it to the shop
Thank you! I had the right idea just doing it wrong
No worries!
I have tried it it. Is the best tool available for this purpose.
Yes.
You are amazing mechanic 👏
Thank for teaching us 🙏
I love the music 🎶 too.
Thanks for watching!
What happens if you break the bolt extractor in the bolt. And it’s recessed and not weldable?
If damaged it should be possible to weld
@@toolsforwork it’s too recessed
Как называются эти сверла?!
Broken bolt extractor
@@toolsforworkСпасибо.
Todos muy chingones a ver háganlo con el más pequeño
😂
Thank you so much for a short to the point video💯💯💯
Glad it helped
Thank you very much!
You're welcome!
What kind of drill were you using to drill?
Alloy drill bit
Where can i buy it. Or whats the product call?
Please wait for our online store
For smaller bolts, use a drill.
OK
Try this is a constricted space! Would it be that easy to extract?
You’ll know by actually using it
Значит газовый ключ с таким рычагом не смог с разводной 😢бес проблем Н.... Ю где-то
Mainly it's not the wrench that works.
It wasn’t stuck to begin with
So?
Проще гайку приварить
Maybe
How do you get the.bolt of the extractor bit
That's easy, fix the broken bolt with pliers, then reverse.
надо было откручивать, а не закручиват.
distortion?
они так зделали шоб наверняка.со всех сторон подпилили.а то начнуть откручивать,а он возмись и открутись
Try that with a smaller bolt
OK
como se llaman esas brokas?
brokas?
I been trying to drill. and my drill wont go deep into. The screw.
Please change to a better drill bit
Use metal drill bit bro
Good work
Thanks!
Mine broke when I was trying to remove it. Now I have to remove that too! Any suggestions ?
You can also try welding.
Does not work .... dont waste ur money i bought the tool used it on a smaller bolt that that and it did not work ....
You may not be using it correctly
But the bolt extractor snapped too 😢😢
This is unlikely to happen
Estoy en Colombia dónde puedo cmprar esa erramienta
Please wait for our online store
Bolt extractors never work for me lol
Why?
@toolsforwork don't know. Just recently. Bolt broke tap a spot for my bit. Drill a pilot hole, extracter just spins. Yes I'm going in the right direction
سعر
Set up to fail then save the day 😮
😂
Which type of bit i should use if want to drill hardened steel ?
Alloy drill bits can do it
Победитовое или вальфрам
Dosent work like that
Why?
@@toolsforwork because in my experience they don't work they will break before the bolt backs out
@@michaelpurcell2103depends on why the bolt broke, what's been done prior. I've had bolts that snapped because they are so old and rusted, but weren't actually stuck, and had to back out the rest of the bolt with an extractor.
Mine snapped off on a much lesser bolt
Please use tools correctly
@@toolsforwork I did lol
Meron ba shop dto nyan sa manila?
No.
نسبه النجاح اقل من 30%
Why?
Whats the name bore tool?
Broken bolt extractor
These comments lol.
?
I like the way it has opposite thread.
Yes.
That's exactly how it's supposed to be.
What size drill hole ?
M4
Con cosas muy adentro no funciona
deep in the heart?
Hi
Hello
Try a broken bolt in metal
OK
Болгаркой болт подпилен кому ты чешешь
Please watch the video carefully
turn music off
Why?
What extractor set is that?
Broken Screw Extractor.
Stud extractor
These bolt extractor only works for midly and loose bolts. I have broken more than getting loose.
Maybe?
Avant du dégripant !! voilà voilà
Where?
Nice joke
Joke?
@@toolsforwork sorry clicked on the wrong short to reply to.
W prawo się dokręca lipa
?
wow
😂
The background music 🎵 😂
Like it?
Righty loosey
So?
Hm?
Robot?
Stop breaking the bolts by overtightening them 😅
This is to better demonstrate the tool removal
Quá ok
😊
How the F did he break with channel lock
It has been cut with a grinding disc before that
@@herresproductions6567 absolutely
what is channel lock?
@@toolsforwork adjustable pliers
❤️💯👍👌
😊
sirl tari mano piko
?
Staged
?