Bakki Shower Flow Rate - Fitting the 10000ltr Pump

Teething problems

[@mikeeljahosafats3231]

Love the fish!

[@LauMagroTheFrenchKOInection]

Hi both, I love filter tinkering 😊 I didn't think the bin would cope with it as I explained in your last video. The upflow is a fab idea, but with a 10000l pump with no variable control, it might be too fast for the upflow. Chris might need to built a double upflow, then that will be perfect 😊

[@copelandkoi]

Yes we agree he is drawing his plans fior 2 lol

[@LauMagroTheFrenchKOInection]

@@copelandkoi yay, can't wait to see that 😊

[@wadskoi7601]

I have a 10000 lph pump also and I have dimmer plug on it the cost £11 of eBay and you can control the flow of the pump :-) type in on eBay dimmer plug and have a look 🐟👍🏻

[@ItsWhatIDo]

Love your pond. I use a wheelie bin as a trickle shower after a pressured sump type filter. I've just fitted an upflow on my heater circuit. I used to have a blagdon 6000 pressure filter on there but it was a pain to clean. I'm really loving the upflow. So easy to clean. I did a similar thing as you with increasing the pump capacity. I used to run two pumps. A blagdon variable pump that was 6000ltr and a standard 5000ltr pump. The 6000 ran my filters and the 5000 ran the heater circuit. I've now upgraded to a 20000ltr variable pump (way over the top). The reason I did that was because the top of upflow is about 1.75mtr from the floor and I just didn't have the head pressure on the other two pumps. It runs through a oase Y piece so I can control the flow to each of the different circuits and I will be adding a second upflow as soon as I get all the parts. I've done a series of video's on the build if you are interested.

[@copelandkoi]

Hi there, 👋 I will have a look and subscribe

[@AKoiEnthusiast]

I don't use any floss as it is a pain and a chore cleaning it. You will need something to filter the poop first though or it will clog up the media just as quick as the floss and that will be a bigger job cleaning. Either a sieve, Upflow or a Pressure Filter would work. I use a Pressure filter at present but will be swapping to a sieve soon as my flow rate is reduced using a Pressure filter and a Tempest or upflow only works at a slow flow rate (5,000 to 7,500 LPH). A tip would be to fit a couple of Valves, either side a pump or any equipment then you can easily isolate them to remove or swap anytime.

[@copelandkoi]

Thank you good advice

[@marekskoipond9083]

Hi guys.
I never use floss in my shower, but i didn't appreciate the rubbish I was putting over it until I built and fitted my upflow filter, you do need a certain amount of blockage in the shower media to grow the anaerobic bacteria that eats the nitrate, this bacteria won't live on plastic media, upflow filter before the shower will be brilliant, you'll be amazed at what it catches, and the clarity of the water, my 200 x 1000mm tube with 11 litres K+ media handles 8000 lts/hr, only downside needs cleaning every 3-4 days, but beats cleaning floss every day.

[@copelandkoi]

Great that you have put your measurements down. Thanks

[@marekskoipond9083]

@@copelandkoi have a look on my channel, you'll see it in action.

[@copelandkoi]

Will do. I subscribed ages ago to yr channel

[@stubbsaquatics6080]

Love that little pump.. I may have to try and find one

[@wadskoi7601]

The fishes look good and the black and white one the smaller one is nice 🐟👍🏻

[@copelandkoi]

Thank 😊

[@MrWiskin]

How to make things as hard as possible. 1) cut hole in shed 2) squeeze in baki shower 3) struggle to get anything in or out ever!!

[@copelandkoi]

Lol its not that bad.

[@boxtriker]

Under gravity from the skimmer you would need a 3 inch or more feed to the bin for it to have worked on the 10000L pump. Think you are right in thinking upflow filter to the shower from the pump but as to weather you build one or go with the EA Tempest build one off Terrys plans and go with the Diy auto clean on it as well the Tempest only flows 5000L so would put you back to where you started. Thanks for filming

[@copelandkoi]

Yes I agree tempest no good for flow. Would need to make one. Thanks for the advice

[@michaeldurrans316]

I just put my filter floss in the skimmer basket now and clean it daily.

[@copelandkoi]

Yes I've done that as welll

[@LeTwistedOne]

Hi mate wouldn't it be easier for you to take off the or hinge the board directly above the shower for ease of access 👍👍👍

[@copelandkoi]

Yes good idea Twisted koi. We will do that

[@markpaine882]

You will need a filter. If you can find a 2nd hand one going cheap try a large pressure filter until you work out what you want to do or buy an expensive very large self cleaning one if you are flush lol.

[@copelandkoi]

Hi thanks we went with a pressure filter. Video shortly

[@toddy3474]

I have a 1mtr bakki shower and run it at 15000ltr with no floss and water is very clean but I have a Burton drum filter 👍

[@copelandkoi]

That's great 👍

[@mikef6474]

I use filter floss in both my showers it does a great job

[@copelandkoi]

Thanks for advice

[@steventhompson6180]

Have you tried some egg box crating on top of media to stop it sticking

[@copelandkoi]

Good idea 💡 thanks

[@koijoy]

i use floss in my bakki does a good job i would not bother re useing floss as it cheap enough not worth all the hassle of washing and letting it dry

[@copelandkoi]

Thanks for the advice. We're do u buy yrs from

[@copelandkoi]

Thanks

[@koizone5671]

Wow 😍
Beautiful koi pond
What do you put around the koi pond??
Wood?

[@copelandkoi]

Yes it's decking and thank you

[@koizone5671]

Ohh decking
Neat and beautiful 😍