Stihl MS192 TC bogging down won't idle, new intro music lol

Take 10% off your entire order at the Hipa store by using promo code, go2guy ,at checkout.
Website link:www.hipastore....
A bad metering diaphragm
Due to factors beyond the control of Neighborhood go 2 guy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Neighborhood go 2 guy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Neighborhood go 2 guy recommends safe practices when working with power tools, hand tools, lifting tools, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Neighborhood go 2 guy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Neighborhood go 2 guy.

[@coyrice9950]

You don't have to disassemble the trigger to remove the carb

[@plopoctogon]

And this is why I run a husqvarna now. I have this saw as well. And it crapped out on me within a month or two. My husky has been running for years no problem. And I beat that thing up!

[@GozonTheGonsarian]

just pull the carb out and unhook the linkage. no handle disassembly needed

[@DillonMW]

Great video!! I have a MS 193 T and it won’t idle, I’ve ruled it up to the carb needing a rebuild.. this video helped a lot!!

[@Neighborhoodgo2guy]

have you checked the spark arrestor on the muffler it could be fouled up with carbon deposit? thanks for watching good luck

[@DillonMW]

Neighborhood go 2 guy I removed that, changed the plug, and put fresh gas in it.. still won’t idle.. I even adjusted the screws on the handle per the manual.

[@lalo2641]

Thanks

[@MrMalickja]

Love the new theme song! Keep up the good work!

[@Neighborhoodgo2guy]

thank you sir.

[@cbnx82703]

Not necessary to remove the handle cover to remove the carburetor, just pull back on the carburetor and manipulate the linkage off of the carburetor... obviously your first ms 192 T

[@jaypayelite117]

He got it done🤷‍♂️

[@Nunya-gk9fr]

Stop fuckin crying big baby

[@erikesparza685]

I have a still that doesn't start unless on full choke and starter fluid is applied, any suggestions?

[@Neighborhoodgo2guy]

I would bet that you have a bad metering diaphragm or a plugged up carburetor, when you spray the starter fluid, which I would be cautious about how much you use because it doesn't have oil mixed with it to help lubricate the cylinder wall, so when you spray, it goes directly through the carburetor and ignites when you pull the rope. So if you're comfortable take off the carb and give it a good cleaning, if the carb is clean when you open it up check out the metering diaphragm that sits on top of inside of the carb. Its circular with metal, if it moves freely and doesn't feel "stiff" it's probably ok? But to me it sounds like it's starving for fuel and this is most likely the issue. Keep me posted ✊

[@user-gi3xj8nz3s]

Great 👍 video. Do you have anymore videos on the 193t chainsaw. How to’s Tuneup etc.

[@Neighborhoodgo2guy]

I don't. Sorry.

[@user-gi3xj8nz3s]

Is the 192t parts the same for the 193t. For example the filter or spark plug?

[@Neighborhoodgo2guy]

Filter should be interchangeable, not sure about the spark plug

[@cliffcorbitt9494]

@@Neighborhoodgo2guy same cc engine uses the same plug. make sence lol? ngk brand BPMR7A

[@fordguyfordguy]

somehow I misunderstood and was thinking you would show how to adjust the carb.

[@Nun273]

Hi