Nice to see a clean, coherent, modern mod guide for an older blaster. I was unaware it had this much potential. Guess I ought to dig around and find mine, and give it a little upgrade.
Man you have the best nerf videos period.. mods yup.. games yup. Wars yup.. entertaining and very helpful.. man wish you the best to a million subscribers, your an awesome modder, explain everything so good my dog understands. Keep up the GREAT work bruh
@@BradleyPhillipsYT pretty well, I was getting around 90fps with a spring spacer, ar removal, and super gluing the empty ar assembly together to remove air leaks.
Many people don’t know this but the mega big shock is fully capable of operating with a rival spring. (I used the Apollo spring) this plus re barreling with pvc pipe for normal darts and it hits VERY hard.
The most powerful ( smaller than jolt) is probably the X-Shot Micro. Does 75fps out of the box. I got mine to 95fps with the AR removal. With a spring upgrade and maybe some brass it can definitely match this at half the size!!
I did a very simple mod to my jolt to fire half lengths but I noticed that it can fit 2 half darts and fire two darts at the same time quite well I wonder if the moded triad can do the same without breaking the smart air restrictor
I could not get that pin out for nothing. It’s still not out. I put a tiny spacer (about the size of a quarter) in below the stock spring and I got it to catch once. Not near as easy as I expected 😞 Update: So the spacer will work, but it can only touch the spring, and must not get in the way of the actual plunger at all. The trigger pin little needs to be tapped out with a hammer with something like an Allen key. Nothing crazy hard, but steady taps. Finally for the front orange portion on the barrel these is no screw, you have to drill through the rivet
Could*.... adding a small piece of PVC as a buffer for the spring add some power? Similar to how the caps work on the out of darts nexus pro caps? It’ll work but it has to only touch the spring, and avoid the plunger at all costs
Jolt with similar mod will only get about 60fps, the plunger volume is much smaller. The inside of a Bigshock is similar to a Jolt though and with this spring upgrade gets 160fps with a brass barrel.
My little dog loves to chase around nerf bullets but the elite disrupter we bought goes waaay too fast for him to even see if fly across the room to fetch. Any ideas of slow nerf guns?
Yes chronied with half lengths, full lengths aren't much different in velocity depending on which ones you use, but a lot of full lengths will usually spiral out of control.
1. When dart post removed can we fire full sized darts 2. Do we need upgrade spring for this i don't have money for this 3. 134 fps is safe for indoor wars and does it hurt
In the US we have these fake jolts that have better catches and a removable plunger head. I bet if I tried I could match your triad. As it is I went a different direction with the mod I did to my current on.
@@dimarziojazzyv5447 no. It has a far better catch and a removeable plunger head. Last I checked the heads of jolt plungers are pined on. And I wasn't trying to create a flame war. I'm just answing his question of can you think of a better smaller pistol. I could be wrong but I think with the right mods this could be...
@@BradleyPhillipsYT Ehh, I've used Vaseline on my Flashlights O-rings. It depends on what Rubber they're made of. Latex Rubber will get eaten by Vaseline.
I put a 7 kilo retaliator spring in mine and removed the dart post to fire stefans, the readings were a bit inconsistent but I recorded close to 300 with worker gen 2s
Nice to see a clean, coherent, modern mod guide for an older blaster. I was unaware it had this much potential. Guess I ought to dig around and find mine, and give it a little upgrade.
Love the Triad. One of the most underrated pistols
Samuel me too in my opinion a jolt vs a triad I would pick the triad it is just more powerful and more capacity
It sucks just got mine and the darts keep popping out, unusable. Is there any way to fix this
King8576 73 try to use dart with a large hole at bottom
I modified mine to be a shotgun
This is a nice mod! I love unassuming blasters which pack a punch. Nicely done!
6:15 idk why but that fly landing in your hair cracked me up. Great mod guide man I really enjoy watching all your content!
Didn't even notice that lol
Man you have the best nerf videos period.. mods yup.. games yup. Wars yup.. entertaining and very helpful.. man wish you the best to a million subscribers, your an awesome modder, explain everything so good my dog understands. Keep up the GREAT work bruh
Hey....nice to see some love for the triad
Damn, with this type of mod it hits about the same or even harder than my stefan retaliator lol.
Well it does take the same spring!
Great guide! Might have to add one as a last resort blaster
It would be perfect for that.
Excellent mod detail. The only other blaster I can think of in this size and form factor is the Dart Zone Tri Fire. Stock it surpasses the Triad.
Do you know how that performs modded?
@@BradleyPhillipsYT Not personally. I have some, but haven't modded yet. My concern is spring size for it.
@@BradleyPhillipsYT pretty well, I was getting around 90fps with a spring spacer, ar removal, and super gluing the empty ar assembly together to remove air leaks.
Yes! an Australian TH-camr! You understand the pain of going on ebay to find a stryfe costing $100 second hand plus shiping :(
I live in Malaysia and a Stryfe costs RM120 here :( I feel you
I got a stryfe, a raider stock, and three 18 dart mags for $15.
Awesome mod video! Much more instructive than the first
Many people don’t know this but the mega big shock is fully capable of operating with a rival spring. (I used the Apollo spring) this plus re barreling with pvc pipe for normal darts and it hits VERY hard.
I came here for the nerf mod but man I gotta compliment that knife of yours
Note: this catch mechanism is also used in the Scravenger 2-dart pistol.
now I kinda want to do this spring upgrade and gut the smart AR to turn it into a mini shotgun.
That works too
First saw one of these triads in a party
Being used for some target practice game
pliiiiiiiiis i wont breathe until you do the nerf elite 2,0 trio
what a sick pistol spin btw
Waiting on a spring but I'm also removing the ARs so I have a pocket sledge fire when I'm done.
How
By removing the ARs
The most powerful ( smaller than jolt) is probably the X-Shot Micro. Does 75fps out of the box. I got mine to 95fps with the AR removal. With a spring upgrade and maybe some brass it can definitely match this at half the size!!
How much fps would one get using a 9 kilo spring? Mine seems to do fine without reinforcing the catch, and I didnt cut the spring either.
80-90
1:40 Could this work with a zip tie? Or does it strictly have to be an elastic band?
Can you also remove the air restriction in between the white pins?
I did a very simple mod to my jolt to fire half lengths but I noticed that it can fit 2 half darts and fire two darts at the same time quite well
I wonder if the moded triad can do the same without breaking the smart air restrictor
Nice guide!
Could I put a 12kg spring from the longshot or retaliator in a triad # sos for all the questions
Woo this is vid of the week
You made me Monday with a new video!
I could not get that pin out for nothing. It’s still not out. I put a tiny spacer (about the size of a quarter) in below the stock spring and I got it to catch once. Not near as easy as I expected 😞
Update:
So the spacer will work, but it can only touch the spring, and must not get in the way of the actual plunger at all. The trigger pin little needs to be tapped out with a hammer with something like an Allen key. Nothing crazy hard, but steady taps. Finally for the front orange portion on the barrel these is no screw, you have to drill through the rivet
Do you have the link for the spring maybe ? I can't really find anything.
Would some tape work? i dont have any of these high strength bands
Picked up one at the goodwill today for $2.00 👍🏼
2:25 Indeed, I've done this with my Jolt.
I am going to do this mod tomorrow
Did you? If so, how did it go?
Why did you cut the three long bars??
To fire stefan darts. (half lengths.) without that, it would not push down the air restrictor.
Spencer Linkous ohh thanks
Could*.... adding a small piece of PVC as a buffer for the spring add some power? Similar to how the caps work on the out of darts nexus pro caps? It’ll work but it has to only touch the spring, and avoid the plunger at all costs
Sure
@@BradleyPhillipsYT I’ll give it a shot as I don’t have a spring, but did pick up a goodwill triad today. Thanks
@@BradleyPhillipsYT Is WD-40 an advisable alternative to lithium grease or is that a big no no?
could you mod a jolt with some type for spring upgrade and a re-barrel
Jolt with similar mod will only get about 60fps, the plunger volume is much smaller. The inside of a Bigshock is similar to a Jolt though and with this spring upgrade gets 160fps with a brass barrel.
@@BradleyPhillipsYT Crap that sucks, you can't even like re-barrel a jolt with something
@@Mr.Chunggg if you are really good you might try doing a micro hpa jolt.
@@tatsuhirosatou5513 Send me a link to whoever made a micro hpa jolt
@@Mr.Chunggg Maybe with Mr. Phillips' catch upgrade you can also fit a K26 in a Mega Bigshock just like Captain Xavier did
if you dont mind boomco, the halo pistol with a k26 spring is very popular, accurate and powerful
Not as small as this though. I have two of those Halo M6 pistols. Would have to say Triad with Worker darts has better accuracy too.
@@BradleyPhillipsYT i might have to make my own then
My little dog loves to chase around nerf bullets but the elite disrupter we bought goes waaay too fast for him to even see if fly across the room to fetch. Any ideas of slow nerf guns?
Probably the easiest thing you can do is add extra weight to the darts.
Oh cool I didn't know that back cover came off.
Would brassing the bottom barrel work. I like your reserve shot tactics
Brassing will improve velocity even more but ideal barrel length is too long to load without a tool.
I love this mod guide! I just took out the stems so I can shot half darts now. Do you know a sping I dont have to cut though?
What are the new bullets that you used ? Also do I need to cut the dart post ?
If you want to use half length darts then yes. If you, don't want to, then to
How do I remove the orange front nose, isn’t a screw
From memory the screw is either inside from the rear or at the front.
Just done this but my trigger is MEGA HARD to pull why?
will a k26 do for this gun? I’m planning to buy one and mod my other gun too with 1 spring
What size spring would you recomend for a jolt
Just keep the stock one, you gain like 5fps with a heavy one.
If you have the stock from the modulus strike and defend, you can take its spring and double it with the jolts to expect 75 FPS
Nice video! Out of curiosity, did you chrono it with half lengths then?
Yes chronied with half lengths, full lengths aren't much different in velocity depending on which ones you use, but a lot of full lengths will usually spiral out of control.
So if I take out the little spikes will it just not shoot?
Or will it shotgun which is what I want to do
It'll shotgun
OH FUCK YES
pardon my french
Can U brass the barrels or barrel? Does it have any effect! Can we use any Retaliator spring from blastertech or blastermod?
Ya u can I used a worker 9KG spring works and catches well
Thanks dude just tried it with 7kg spring got 90fps
where to find a spring ???
bro u didnt take off the air restrictor
1. When dart post removed can we fire full sized darts 2. Do we need upgrade spring for this i don't have money for this 3. 134 fps is safe for indoor wars and does it hurt
Yes you can fire full lengths, you don't "have to" upgrade the spring but to get these velocities you do. 134fps doesn't hurt.
@@BradleyPhillipsYT Thanks but i have orange trigger version
What would happen if i used electric tape instead of teflon tape
Both work
i was planning on getting an triad but does it work on an jolt?
In the US we have these fake jolts that have better catches and a removable plunger head. I bet if I tried I could match your triad. As it is I went a different direction with the mod I did to my current on.
Do they have larger plunger tubes than a regular Jolt?
@@BradleyPhillipsYT no but they have less dead space than a triad. Only an idea.
@@GummyBearRacing so.. it's just a jolt
@@dimarziojazzyv5447 no. It has a far better catch and a removeable plunger head. Last I checked the heads of jolt plungers are pined on. And I wasn't trying to create a flame war. I'm just answing his question of can you think of a better smaller pistol. I could be wrong but I think with the right mods this could be...
@@dimarziojazzyv5447 I know the blaster he is talking about the catch is better and they are like 98 cents.
theyve got some dark blue ones at munno kmart for $8
Question, what should I do if the spring in the smart AR push the dart out when I load it?
AnonymousScout get better darts
Stop leaving darts loaded in, they get worn down and won’t be able to be fired anymore.
Haven't you already made a mod guide for this? Great video though!!
I did like 2 years ago. I decided to improve the guide.
Can’t see the sergeant part to pry yousles
Could you do something similar with the Adventure Force tri-max?
If I see one, I'll get one.
You need a different spring but yes you can and because it's a revolver it has less dead space.
Thanks
So it's basically a better Jolt.
P.S You have the same soft voice as Grant Thompson (R.I.P)
An Auzy always has a trust machete with them!
Haha
Is silicon grease ok?
I have one that I modded into a shotgun and it’s really good
Can you use silicone grease
Sure. When it comes to lubricants, just nothing petroleum based or it will eat orings.
@@BradleyPhillipsYT Ehh, I've used Vaseline on my Flashlights O-rings. It depends on what Rubber they're made of. Latex Rubber will get eaten by Vaseline.
I put a 7 kilo retaliator spring in mine and removed the dart post to fire stefans, the readings were a bit inconsistent but I recorded close to 300 with worker gen 2s
No u didnt lol
@@syismadas sorry I meant 12, and yes. Yes I did
@@ethanhudson8574 Show us a video then
Can you put a 12 kg spring the the triad
If you cut it down a little, I'd say so. But you will definitely need the rubber band to catch it.
Also glue the plunger head on solid or it might come off.
Bradley Phillips thank you I only found a 12 spring or a 9kg spring so I will try that and if it work I will unload to TH-cam
Thank you
Bradley Phillips also can use silicone grease for the triad
If a use 5 or 6 kilo spring i don't need to glue it right
Can you please make a video of your halo mk6
I can, but I'm pretty sure I followed Walcom's guide for that. The Triad I couldn't find a guide when I first did it.
Ok
What state do U live in
Australia...
@@Bean41 is not a state
And? That’s where he lives.
@@Bean41 and I asked state not country obviously he's from Australia
Dose Australia have states?
Worker made a KRONOS short dart kit
I saw, I'll be getting one once Monkeemods has stock.
$22 aud to usd is $17!? You spent $17 on a triad!!! That’s insane, here on eBay you can find them for a couple bucks!!!
I saw some Jolts for $25 AUD.
Woah noooo waaay !!
now i regret ruining my blue triad
What did you do to it?
2 aud=$1.44
22 aud=$15.82
I have triad
bruh i live on the same continent and got it for 8 dollars
Bruh i bought a new one for $16 lol
I have a blaster that can hit 150fps and is smaller