you all prolly dont give a damn but does anybody know of a way to get back into an instagram account..? I was stupid lost my account password. I appreciate any tricks you can give me.
@Arthur Wesley I really appreciate your reply. I found the site on google and I'm trying it out now. I see it takes quite some time so I will reply here later with my results.
Yes, it's really good video. We are a strong manufacturer in China, we made many custom metal enclosures, chassis and boxes, with high quality and competitive price.
Thanks for your share, it's outdoor metal enclosure, solidworks is good for our design the drawing.We are a strong manufacturer in China, we made many custom metal enclosures, chassis and boxes, with high quality and competitive price.
Thank You for this tutorial. Can you do more sheetmetal tutorial. I will be working in a sheetmetal fabrication factory. It will help me a lot if you do. Once again Thank You!!!
Great tutorial but you left out --> in order to be able to use the forming tools in Design Library --> select the forming tool folder --> RMC --> check Forming Tool Folder otherwise it will be treated as part file and when you drag it on sheet metal part surface it will be adding another part to part file. Thanks for sharing.
Really thank for this tutorial .but basically my baground in electrical but I like degining .I want to learn but which course will be benifit for me..if it you make electrical related video it will be better for me. Currently I am working in electrical field but I have m ore interested in dgine line .after learning some knowledge I will be set up panel manufacturers unit. So it will be better. Thnks for properly explained.
ohh i underastood this . but i saw one video of checker plate which made directly from APPEARANCES TOOL + FINISH SURFACE OPTION . I DO THIS METHOD BUT i cant made by appearances.
Sir, i have on question..? The final door assembly is not fully defined, it's underdefined.. duration from 26.30 mins... Is that make any problem..? ( Bcz the assembly should be fully defined)
for the 3rd edge flange where you make the lip that the door is going to latch onto, how did you decide the appropriate length of it? in your opinion, is there supposed to be a Hem at the end of the Sheet metal to avoid cuts when handling? Thanks in Advance! :)
Hi, I had issues adding the louvres for some reason. I am totally new to solidworks; I really need to make a similar cabinet design. When I added the louvres, the size was extremely tiny, unable to position them and they would not be displayed. A red X would display beside the louvre component - I will recreate and provide the error here
What an explanation sir. I like it more. On think I want to know from your side that while drafting a sheet metal part which type of controls or tolerance is given in the drawing. Please give the ans as early as possible. Thanks
Hi sir, there is one suggestion when you share your Tutorial video ...please share also pdf ya autocad drgs for us, if possible...this is helpful for us...for making design...i'm awaiting for your positive response...
The forming tool ( louvers, counter sink emboss) are no placing on surface instead it is getting placed on origin or in between the sheet metal . What should I do to place them correctly on the surface?
I love how you say "See" and "Look". Really nice tutorials. Love from Pakistan
Great work.thanks dear,your friend from iraq 🇮🇶🇮🇶🇮🇶
I started to SOLIDworks. I can not speak English. I will follow your videos. Your good teacher is sensin.Thank you.
Hasan Gün Thanks & you are the most Welcome.
Learnt Sheet metal with the help of your channel in August 2023...I'm grateful always!
"I hope you like it"? I love it! Great tutorial.
I had an assignment about sheet metal and you and your video helped me so much...thanks!!!
Big thanks from France 😄
Unnecessary to say: one more great tutorial, sheet metal is the SW "soul", thank you!
you all prolly dont give a damn but does anybody know of a way to get back into an instagram account..?
I was stupid lost my account password. I appreciate any tricks you can give me.
@Xavier Axl instablaster =)
@Arthur Wesley I really appreciate your reply. I found the site on google and I'm trying it out now.
I see it takes quite some time so I will reply here later with my results.
@Arthur Wesley It did the trick and I now got access to my account again. I am so happy!
Thanks so much you saved my ass !
@Xavier Axl no problem :D
Very useful video. I'm electrician but I learn a lot.
I just found your channel, this tutorial about sheet metal is really great and useful. I could learn and observe new operations. Thanks a lot.
Thanks for you help . I have become good programmer in my company just by seeing you'r video
I really like your videos. I am learning a lot about simulation Study and sheet metal by your classes. Thank you!
Yes, it's really good video. We are a strong manufacturer in China, we made many custom metal enclosures, chassis and boxes, with high quality and competitive price.
Thank you for the wonderful very descriptive model and assembly..!!
Thanks for your share, it's outdoor metal enclosure, solidworks is good for our design the drawing.We are a strong manufacturer in China, we made many custom metal enclosures, chassis and boxes, with high quality and competitive price.
Thank you for taking the time to teach us all!!
Dear sir
this is a good style of teaching.excellent video
Straight to the point and very helpful.
Thank you very much!
You are a gifted teacher. Thank you for this video.
Thanks Alot For Thr Tutorial Becasue Of You My LEVEL OF DESIGNING IN INCREASING
Rajat kamboj Thanks ,
Thank you for the clear instructions and good practice projects you provide
Thank you very much for all your great SolidWorks video. I am really enjoying them and also creating them along with your videos.
Your doing great job my friend.keep doing well
explained so clear. good lecture
Very very much like it . . .Thank you very much.
one of the best tutorial, keep it up
i like your video sir ❤️❤️❤️
you are so nice teacher man
I would like to visit you next time I come India .
Haha
You are a good teacher sir
Very Good Presentation / Training Session
#Gratitude
I would soon start my own Solidworks designing - THanks
Excellent tutorial as always!!
really helpful video... thank you sir...
Thanks your best teacher for solid work
Very Good practices....
Very good. Tanks a lot.
I’m in love with your videos
Sir good job u r doing.... learning alot day by day god bless u, keep up
13:09 The back mount holes should be extruded outside, not inside. It makes a gap and help to install panel with roughness on the wall.
correct, also prevent screws from sticking up inside
That is not correct. Most code would require mounting to a backboard or other flat surface.
Amazing Work. Thank You
It’s really very great
Good I try it and make
great video
Take my cordial thanks. I have learnt a great a deal of SolidWork. Your requested to make SolidWork Electrical videos....
bro is a legend
Thank You for this tutorial. Can you do more sheetmetal tutorial. I will be working in a sheetmetal fabrication factory. It will help me a lot if you do. Once again Thank You!!!
Rey can help me
I use this videos to increase my skils.
Perfect teaching style
Great 👍 can you make a trash can with legs to open it?, Please 🙏
amazing, thank you, video very good
Great video!! Liked and subscribed!! 👍🏻👍🏻
Thanks greetings from argentina
Cristian Lopez You are the most welcome,
Great tutorial but you left out --> in order to be able to use the forming tools in Design Library --> select the forming tool folder --> RMC --> check Forming Tool Folder otherwise it will be treated as part file and when you drag it on sheet metal part surface it will be adding another part to part file. Thanks for sharing.
thanks i had this problem .,,. confused for more than 2 hours to fix this problem thanks for mentioning in the comment
Very Nice
Good stuff, and I like his accent ^^
The great indian accent..
Very useful video my friend! Thank you a lot!
GOOD BRO its very easily understand then good slowly teaching
Really helpful - Thanks
İt was great exercise
Sir your back mounting hole is opposite the countersink should be inside
Great job . Thank you
Thanks for the nice tutorial!!
i always folow to you you are nice techer
Very helpful for beginners , Thank you so much
Really thank for this tutorial .but basically my baground in electrical but I like degining .I want to learn but which course will be benifit for me..if it you make electrical related video it will be better for me. Currently I am working in electrical field but I have m ore interested in dgine line .after learning some knowledge I will be set up panel manufacturers unit. So it will be better. Thnks for properly explained.
Nice
Need more electrical pannel videos
Thanx sir we are grateful to your work
you are awesome...... really cool
Oscar Rios Thanks,
Thanks! this was great
ohh i underastood this . but i saw one video of checker plate which made directly from APPEARANCES TOOL + FINISH SURFACE OPTION . I DO THIS METHOD BUT i cant made by appearances.
checker appearance available in tool, you can directly drag and apply, its looks beautiful is you have realview graphics cards,
Hello sir,
Unable to drag and drop the louvers from library directly on to the face, any other alternate method?
good job sir
Sir, i have on question..?
The final door assembly is not fully defined, it's underdefined.. duration from 26.30 mins... Is that make any problem..?
( Bcz the assembly should be fully defined)
If i want to make Plastic Enclosure or 3D Printed part should i follow same method? Please guide
yes it works for 3D printout,
this video is was very helpful for me .Ireally liked it
good job! thanks :)
Nice..its very helpful
Dear sir,
thanks to you great job this is very use full for sheet metal work
Hi
SUPERB !!!
Thank you. I is so nice and helpful.
Great tutorial for cutting but not good for production. How bending machine will work?
This video is really helpful thanks for this
Anand Mendish Thanks,
for the 3rd edge flange where you make the lip that the door is going to latch onto, how did you decide the appropriate length of it? in your opinion, is there supposed to be a Hem at the end of the Sheet metal to avoid cuts when handling? Thanks in Advance! :)
hello, can you please tell us how to make design table for the louver...forming tool? Thanks
Nyc session sir..its quite helpful ..i want to ask a question ..
cant we change the size of louver??
Oh. Thaks a lot. I'm from Russia and i look at your videos only. Like and subscription from me
sir i cant reduce the size of circular emboss please tell me how to do this
Hi, I had issues adding the louvres for some reason.
I am totally new to solidworks; I really need to make a similar cabinet design.
When I added the louvres, the size was extremely tiny, unable to position them and they would not be displayed. A red X would display beside the louvre component - I will recreate and provide the error here
What an explanation sir.
I like it more.
On think I want to know from your side that while drafting a sheet metal part which type of controls or tolerance is given in the drawing.
Please give the ans as early as possible.
Thanks
which company are you working for
Hi sir, there is one suggestion when you share your Tutorial video ...please share also pdf ya autocad drgs for us, if possible...this is helpful for us...for making design...i'm awaiting for your positive response...
Unable to Increase the Size of Louver... Please help
amigo muchas gracias por tu conocimiento
Add one more constrain to stop the door. Now its 360 deg freely rotates on the hinge.
really good sir
Very good
The forming tool ( louvers, counter sink emboss) are no placing on surface instead it is getting placed on origin or in between the sheet metal .
What should I do to place them correctly on the surface?
Same issue here. Also a window appears :"are you trying to make a derived part? Y/N"
Thanks very nice creation
Thanks,
thank you you are the bast
Thank you for this very useful tutorial