legit didnt know those libraries were there. helped 1000% more than what i was expecting id have to do. now if only you could adjust the sizing of those as if they were features within the placement or at all
hello sir thanks for your all tutorials. could you please tell me how can I add forming tools in my design library ... I search for it but i didn't find that.! my solidworks version is 2022 appreciate that in advance
I think your mirror command of the gusset didn't work because of the fillets. I find that solidworks is awkward about mirroring fillets/chamfers, so I've learned to save fillets/chamfers to apply in a single feature at the end of creating parts.
Very nice design with hints u r uploading ,, Thank u so much I learned a lot from u nd hv Cleard many doubt, sir can u upload a video "How to transfer hole one to another parts at exact dimension in sheet metal ,, plzz upload a videos bcz it is so confusion during Assembley
Some beginners can't imagine how doing something will look like when mirrored. It helps with continuity. Especially when we have seen the part finished in the start with all the features.
@@SergeiFragov engineering is not an imagination process, you think 10+ times and build the part in your brain well before you sit down and design anything. And having done one side and mirror it in one go it will save you tremendous amount of time. Unless you want some features present on one side only, I really see no reason why you do mirroring after every feature build.
Hello I want to design a simple part using twist or flex feature but also want to flatten it, however, flew feature wouldn't allow me to flatten the part, can you guide sir? Thanks in advance.
Hi, everything is going well until I try to do the forming tool because after I do click the Circular Emboss icon appears a question "Are you trying to make a derived part?" Please let me know what do you think could be a possible mistake. Thank you...
Excellent tutorials. It is straight to the point, easy to follow and understand.
legit didnt know those libraries were there. helped 1000% more than what i was expecting id have to do. now if only you could adjust the sizing of those as if they were features within the placement or at all
Thanks! wonderful SOLIDWORKS instructing videos! 😎
Thanks for your valuable informations, please explain how to create new forming tools
Teşekkürler formin tool açılımını kimse yayınlanmamış. Sayende ögrendim. (Thank you. forming tool flaten nobody found out thanks to you unpublished.)
Thanks a lot Man for your time, just I could mirror the gusset by mirror command
Seems like you could reduce the number of features by sketching the mounting locations all at once vs creating mirror/pattern features.
hello sir
thanks for your all tutorials.
could you please tell me how can I add forming tools in my design library ... I search for it but i didn't find that.! my solidworks version is 2022
appreciate that in advance
At the end,, "Thnx for teaching"😃
It's very good thank you so much❤
thank you so much for all education
Очень крутые уроки! Спасибо! Всех благ, Вам!
thank you for taking the time to put this together
I think your mirror command of the gusset didn't work because of the fillets. I find that solidworks is awkward about mirroring fillets/chamfers, so I've learned to save fillets/chamfers to apply in a single feature at the end of creating parts.
Thanks for video ! Design is very difficult.
thanks my friend 👏👏👏
Perfecto. I love this video. Thank you so much.
Very nice design with hints u r uploading ,, Thank u so much I learned a lot from u nd hv Cleard many doubt, sir can u upload a video "How to transfer hole one to another parts at exact dimension in sheet metal ,, plzz upload a videos bcz it is so confusion during Assembley
Sir very good details lot of thanks, how draw in pipe structure and fittings please upload...
Thanks for this video
Thank you so much for the videos, very interesting, but i want to know if you have some tutorials for the manual and electric pallet truck
Great 👍🏻
thank you so much was share videos useful
Thank you
Good
Thanks very much
Plz share video on k factor
Thank you for the useful tutorial. Like.
6:17 - in my case Inner/Outer corner fillet are disabled. How I can edit them?
Same issue
goooood freund
what is the reason for doing 800 mirrors when you can model everything in one half and then mirror everything?
Some beginners can't imagine how doing something will look like when mirrored. It helps with continuity. Especially when we have seen the part finished in the start with all the features.
@@SergeiFragov engineering is not an imagination process, you think 10+ times and build the part in your brain well before you sit down and design anything. And having done one side and mirror it in one go it will save you tremendous amount of time. Unless you want some features present on one side only, I really see no reason why you do mirroring after every feature build.
@@SergeiFragov also since you're aiming at begineers you could also show them how to save time and work more efficiently
good job mate,very helpfull
great again
parabéns por este excelente material
SIR, PLEASE MAKE A VIDEO ON WELDMENTS IN DETAIL & FORM A PRODUCT WITH THE HELP OF SHEET METAL & WELDMENTS
hello sir, please post the drawing for the CAD as well so that we can practice
in new videos you will get the drawings,
Best
More Autodesk Inventor Please
Sir plz do gearbox routing and piping.. waiting to watch sir
please subscribe my channel for solidworks alll in one piping is also included in that
Sir hydraulic manifold block ke video banav
How to do oblong emboss
Hello
I want to design a simple part using twist or flex feature but also want to flatten it,
however, flew feature wouldn't allow me to flatten the part,
can you guide sir?
Thanks in advance.
Beautiful
please send more sheet metal parts videos
But after converting there is no annotation of bend lines by how much degree we need to bend ? How to resolve this ?
I dont have desine library how i add embosess
please tell me how change the size of emboss ?
Thank you!
i unable to attach the circular emboss as you did, the options type and position has not appeared to me and i am unable to move circular emboss..
Thanks
Sir need to Hindi language videos in exercise pls helpme .
Boss!
Sir can you explain what is 3d experience solidwork .
When you convert into dxf emboss is not coming?
Hi, everything is going well until I try to do the forming tool because after I do click the Circular Emboss icon appears a question "Are you trying to make a derived part?" Please let me know what do you think could be a possible mistake. Thank you...
Inside SolidWorks "Right Click" on the "foming tools" folder and select "Forming Tools Folder"
Which GPU do you use?
Your gusset had geometry failure when you tried to mirror it. Mine was fine but the (2) fillets failed? WTH?
It shows error when i try to flatten at the end...
Me too
I need that exercise for another software
Please upload drawing sheet sir
Круто!
This is Hilarious at 0.5 speed
top
Mr can u translate this vedios in arabic language plaise
adamsın lan
Thanks