CORRECTION! Someone informed me that printables.com does have NSFW content on the site but you can only see if of your logged in. Also the thumbnails are blurred and you have to approve it to see them. Sorry that I misspoke.
Great video. Please consider adding timestamps/segments in order to jump to the sections. I'll go over this a couple of times, but will need to search/stop/play/search again to find the sites you've highlighted that I am most interested in. Otherwise, great rundown.
I'm almost in the same boat. Have a job, trying to stay employed at my current salary until I'm 70. But if the rat race tells me to go home and grow old - my newly purchased A1C should help ward off the cerebral cobwebs.
Agreed. I cannot believe he left out that glaring omission because I'm a member of a number of patreons that, as soon as the model is released, the next day it's on Etsy for $2. Total thieves.
@@anthonylong5870 I disagree. I trust their models above anyone else's. Short of my patreon artist. You get what you pay for. They guarantee their models and provide tech support for those having trouble printing them and will fix them if there's an issue.
Yeah a few have been around a long time just not well known. Like threeding has been around since 2013. When I got started that and thingiverse were the places to go.
Lots of creators do this for security reasons so someone can't leave a random link within the comments. It might even be a TH-cam thing, happened to me. However, still pretty lame the creator didn't put them in the description as a few people asked.
This might be an extremely dumb question. My A1 gets delivered today and have only been looking on the Bambu website. I assumed the import to bambu studio and import profile etc was for the A1. Do profiles get downloaded when I download a STL from another site?
Not a dumb question you can select your printer and then send it to your printer and it’s using default profiles that are already in Bambi studio. If you’re new to Bambu studio I did a full series teaching it that you should check out. It will help you hit the ground running good luck!
STL files don't contain any profile. Just open it in your slicer and set your filament, quality, supports as necessary. You'll probably waste a few prints figuring out the best settings, but that's part of the learning.
@@pokenchoke thank you very much for letting me know this. I made a pin comment to let everyone know. I just personally never seen any. I appreciate the feedback.
I rly understand why you did the video like this but not having links to the sites and or even having their names listed in the description is just annoying and makes me not want to watch your videos ever again 😢
@@JimboHurt no problem. I know a lot of people get printers for their kids and unfortunately the internet isn’t the safest place for kids. Also A viewer informed me that I misspoke about printables they also have NSFW content you just have to be logged in to see it.
@@ItsMeaDMaDe thanks for pointing out nsfw for average artists like me that are just sick and tired of the internet assuming i consent to see every piece of filth
21 minute video to give 13 sites and no links in the bio……? Like I get maximizing your Adsense and all, but come on dude that’s ridiculous. That’s a “never sub” red flag to me.
CORRECTION! Someone informed me that printables.com does have NSFW content on the site but you can only see if of your logged in. Also the thumbnails are blurred and you have to approve it to see them.
Sorry that I misspoke.
Would you be able to create links in the description that goes to each website to make it easier to check out for viewers?
0:46 Thingiverse
2:24 CGTrader
3:46 Yegi
5:03 My Mini Factory
6:42 Threeding
7:52 Cults 3D
9:26 Pinshape
10:30 Thangs
12:04 Printables
13:30 STL Flicks
15:40 Maker World
17:07 Etsy
19:19 Patreon
Saved me 20 minutes, thanks brother.
i bought stl pak from etsy and the shop was removed so no access to the files..but all the others are cool
Thank you very much!
Looks like #10 should be STLFlix (or at least - that's what worked for me)
Thanks...
Can you put a list of links to the sites in the description? Would be very useful!
Agree 👍
Also agree!
Thanks for the great vid tho - a few sites in there I have never seen before.
He does not want you to be able to skip watching his video. Thats how you make money.
You can go through the transcript. I guess that will speed things up and skip him talking 😂
Thank me later
00:45 Thingiverse
02:23 CGtrader
03:45 Yeggi.
05:02 My Mini Factory.
07:53 Cults3d
09:25 Pinshape
10:29 Thangs
12:04 Printables
13:31 STLflix
15:40 Makerworld
17:07 Etsy
19:19 Patreon
This was considerably more detailed than I was expecting it to be.
Great video. Please consider adding timestamps/segments in order to jump to the sections. I'll go over this a couple of times, but will need to search/stop/play/search again to find the sites you've highlighted that I am most interested in. Otherwise, great rundown.
I have just bought a Bambu A1 and become a pensioner, so I have all the time for it. And I need something to do with all that time 😜
I'm almost in the same boat. Have a job, trying to stay employed at my current salary until I'm 70. But if the rat race tells me to go home and grow old - my newly purchased A1C should help ward off the cerebral cobwebs.
There's A LOT of thieves on Etsy, selling other creators STLs, free or paid, and no good way to report them.
Agreed. I cannot believe he left out that glaring omission because I'm a member of a number of patreons that, as soon as the model is released, the next day it's on Etsy for $2. Total thieves.
Dear videast, you should add chapter in your videos timelines, it would helps a lot
Just what I was looking for. Could you add the list of the sites in the description? Thanks!
I paused the video and checked every new site. Thanks!
Awesome hope I helped you discover some new resources
Grats on 70k subs!
Woah! Didn’t even realize. Thanks so much! It’s kinda crazy I’ve grown so much.
@ItsMeaDMaDe I noticed the 69.9k last night and I was like heck yea. Hah
You missed Gambody. Every file is printed and tested. They also provide files specifically for both fdm and resin.
Gambody are the most expensive site you can buy from and their models are no better then anyone Elses.
@@anthonylong5870 I disagree. I trust their models above anyone else's. Short of my patreon artist. You get what you pay for. They guarantee their models and provide tech support for those having trouble printing them and will fix them if there's an issue.
Just got my son a anker make m5c do those links work for this 3D printer to?
Thanks. A couple I have not heard of.
Yeah a few have been around a long time just not well known. Like threeding has been around since 2013. When I got started that and thingiverse were the places to go.
FYI pretty sure old mate filters on comments. I just posted the URL to all these sites and it immediately vanished.
Lots of creators do this for security reasons so someone can't leave a random link within the comments. It might even be a TH-cam thing, happened to me.
However, still pretty lame the creator didn't put them in the description as a few people asked.
Some of them are difficult to download and extract files to get them downloaded
Also so are paid membership
Being for Bambu is still a con if you want to print using a AMS/ACE on non-Bambu printers for Makerworld.
Does anyone know how to print the transcript?
My man searching for TMNT and Thundercats! Did we just become best friends? 😂
This might be an extremely dumb question. My A1 gets delivered today and have only been looking on the Bambu website. I assumed the import to bambu studio and import profile etc was for the A1. Do profiles get downloaded when I download a STL from another site?
Not a dumb question you can select your printer and then send it to your printer and it’s using default profiles that are already in Bambi studio. If you’re new to Bambu studio I did a full series teaching it that you should check out. It will help you hit the ground running good luck!
STL files don't contain any profile. Just open it in your slicer and set your filament, quality, supports as necessary. You'll probably waste a few prints figuring out the best settings, but that's part of the learning.
Just a heads up. There are NSFW models on printables if you're signed into an account.
@@pokenchoke thank you very much for letting me know this. I made a pin comment to let everyone know. I just personally never seen any. I appreciate the feedback.
I'm still confused what to print
If you're going on these websites use ad blocker
I rly understand why you did the video like this but not having links to the sites and or even having their names listed in the description is just annoying and makes me not want to watch your videos ever again 😢
yay new video
No mention of Kickstarter?!
Oh you’re right that is a good place as well. I even support kickstarters often. Thanks!
Just use a adblocker like ublock :P
Thanks for pointing out nsfw details for kids. Really appreciated that
@@JimboHurt no problem. I know a lot of people get printers for their kids and unfortunately the internet isn’t the safest place for kids.
Also A viewer informed me that I misspoke about printables they also have NSFW content you just have to be logged in to see it.
@@ItsMeaDMaDe thanks for pointing out nsfw for average artists like me that are just sick and tired of the internet assuming i consent to see every piece of filth
Does anyone know of any China-based 3D file site?
0:07 almost started this video as another person lol
MY GOD MAN, push your taskbar to the LEFT!
I would have subscribed to your channel if you had included a list of sites in the description, or at least chapters
I am far more disturbed by the fact you have less problem with ads than you do with NSFW.... ...
Downvoted, no links, no chapters, no ones got time for that.
So many NSFW supported web sites. Clearly, I am the target audience XD
Telegram channels stl
This title is upsetting. You can print a model, and what you'll have is a 3d printed model. But the files aren't printed, they are printable.
If semantics are your thing, start your own channel. 🎉
:)
21 minute video to give 13 sites and no links in the bio……? Like I get maximizing your Adsense and all, but come on dude that’s ridiculous. That’s a “never sub” red flag to me.