Thank you Michal! it's coming soon to the website in full detail :) just gotta retake setting by hand for the 4th time - camera angles are killing me! xx
you all prolly dont give a damn but does anybody know a method to get back into an instagram account? I was dumb forgot my account password. I appreciate any tricks you can offer me
@Jude Caspian I really appreciate your reply. I found the site on google and I'm in the hacking process atm. Seems to take a while so I will reply here later with my results.
How did you attach the silver oval piece to the wood so that it was flush? Also thank you for your videos. I'm not a jewelry metalsmith but I do work with metals and gemstones, in addition to wood, leather, and natural dyed fabrics to create my assemblage pieces.
Thank you very much for this video Lucy. I've just watched it again for the 3rd time after discovering I had cut a perforated line into the rub over cast setting I purchased from Cookies. That's £8 down the Swaney. I hadn't taken into account the tapering outer wall of the setting and had got carried away with the setting burr. I hate my life 😐😉
Hi maam... How to get this exact results on a middle of a flat surface metal.. do i have to carve around it to make it a lip that can be hammer to lock the rock?... If yes can i see how it looks?
I just got an emerald ring and it’s bezel set but the back of the stone is completely covered by the metal (gold). This seems odd to me as all my other gemstone rings have at least a small opening behind the stone. I think it’s better with an open back because more light can shine through the stone. I’m wondering if this is something a jeweler could fix by removing the stone from the bezel setting, cutting a hole in the back of the setting and re-setting the stone. Or would it be too risky & damage the ring too much to attempt this? Great video! I think i’m going to try some jewelry making classes someday.
how do you glue the bezel to the base to keep working on it? I find bezels so fiddly but I think it's because I go for thinner bezel strips and don't have anywhere to place them while I work on them
I am finally doing jewelry work in my own shop. It has taken me 8 years to get to this point in my career. I have some videos of doing pyrography on my channel. I would like to start adding videos like this to it. What camera are you using for these amazing shots?
Most of my jewelry is bezel set including my engagement ring and band 😊 I love this setting so much. You do absolutely gorgeous work 🥰 you’re very talented 🥇🏆
Nice job! A bright cut inside the bezel next to the stone gives a nice finishing touch on top of removing the excess metal covering (and hiding) the stone. Which is a common problem in stones set by people who mostly learn by themselves.
Hi Lucy, how do you call the last “burr” you used around the bezel once it was all set? A kind of burnisher you used with the foredom. Thank you very much!
Great presentation! But it would be helpful if you added text or verbalized what was taking place. For instance, what’s holding the setting in place? What tools are being used? Walking the novice through each step. Things like that. I guess you could say.... look at it from the perspective of the newbie and create your content with that mind. Thanks!
We do have online classes available lovely where we go into all the juicy details :) we are currently closed for enrolment but you can sign up to the waitlist if you visit lucywalkerjewellery.com :)
Debbie, I would think the question is obsolete as you wouldn't set the stone before soldering the bezel to your jewelry piece. I was about to ask the same then it struck me that she has it mounted to the wood for teaching purposes only. I'm only guessing as I'm a beginner.
You make it look so easy. I'm doing this on a marquise faceted stone this afternoon. I still might be able to save it tomorrow. Fingers crossed. This definitely helped.
Hello, I hope you can help! How do you do rubover set a single round stone on signet rings? Should I use a flat top with straight edge stone and just glue it? Or a flat top with single bevel stone? If using a FTSB stone that is 1.5mm in height, do i need the bevel to be a bit higher than the stone? And what would the thickness of the bezel should be? Many thanks in advance!
Beautiful work! ❤️❤️❤️ You have a pair of amazingly steady hands and a very nice swivel vice and I bet that helps a lot. I'm not sure I'll ever be able to cut a seat so evenly free-handed. Anyway, that was a very nice demonstration. I suppose it's time for me to practice making tube bezel settings. Thank you. 👍🙂
Hi Lucy! Fantastic video as usual! Thank you for this. I’d like to know what the first measurement is that you take with the calipers? Is it from the table to the girdle? Thank you. Your friend, JM
Oh but Lucy, how were you measuring how low to go on the outer scribe? I had an emerald, and tried to scribe the inner bezel and damn it all, it left a scratch on the stone. Was my burnisher too small and pointy, because it for sure was smoother and polished. If I go bigger, I get flashing. I am trying to learn a bright cut, and I am signed up and took many classes. Hope to enjoy many more,
Is there anyway you would do a tutorial on making a rectangulart type bezel (rectangular gem with 8 sides) ? OR can you atleast tell me is it possible to make a bezel for this type of stone without using a bezel punch? Thanks
Love this video and technique Lucy, I’ve learned a lot from watching your videos, you have great skills and your videos are amazing!, Thank you so much!.
Brilliant Lucy! Even though I've done it before there are always new tricks you can see with your wonderful videos!
Thank you Michal! it's coming soon to the website in full detail :) just gotta retake setting by hand for the 4th time - camera angles are killing me! xx
Super! I'm new to the advanced stuff, you make it look soo easy! Thank you for sharing this, it really is helpful..
Great video, can you tell me how you secure the bezel to the block of wood please 🙂
I was wondering that too.
It’s superglue... remove with acetone 😊
@@bonniemagpiejewellery thank you 🙂
She explains it all on her comment below the video, superglue then soak it in acetone to remove from wood.
I wonder if nail glue would be as effective as super glue or cheaper...??
Thank you Lucy ,it was a pleasure watching you skilfully create a beautiful piece of jewellery 😊.
Thank you so much for the clear video with close ups! You DO make it look easy :)
you all prolly dont give a damn but does anybody know a method to get back into an instagram account?
I was dumb forgot my account password. I appreciate any tricks you can offer me
@Chance Trace instablaster ;)
@Jude Caspian I really appreciate your reply. I found the site on google and I'm in the hacking process atm.
Seems to take a while so I will reply here later with my results.
@Jude Caspian It did the trick and I actually got access to my account again. I'm so happy!
Thank you so much you saved my ass!
@Chance Trace No problem xD
hello what is the electric tool to use for stone setting?
In future it would be nice stating which burrs you used for each part
Holy Moly you are skilled!! Great video - just mesmerizing!
Beauty, personality, and mad skills. Great video!
Such a beautiful setting! How would you recommend polishing a similar stone, Rubellite set in the same way if it develops a few scratches?
Hi Lucky Walker. Thank you for sharing. I found it informative. I would like to recommend that you fire the Smurf orchestra though.
How did you attach the silver oval piece to the wood so that it was flush? Also thank you for your videos. I'm not a jewelry metalsmith but I do work with metals and gemstones, in addition to wood, leather, and natural dyed fabrics to create my assemblage pieces.
It's just superglue :) I remove it later by soaking it in acetone
4:54 stress crack in the bezel from facet? How was this repaired?
I love your beautiful artworks.
Benomar
Congratulations on the great job. Thanks for sharing . Greetings straight from Brazil.
Now it's made how do you get it soldered to another piece without damaging the stone? Thanks I loved the video it helped me out very much.
Thank you very much for this video Lucy.
I've just watched it again for the 3rd time after discovering I had cut a perforated line into the rub over cast setting I purchased from Cookies. That's £8 down the Swaney.
I hadn't taken into account the tapering outer wall of the setting and had got carried away with the setting burr. I hate my life 😐😉
Hi maam... How to get this exact results on a middle of a flat surface metal.. do i have to carve around it to make it a lip that can be hammer to lock the rock?... If yes can i see how it looks?
Wow, I enjoyed that. Now, I'm going to go and set a nice faceted amber gem that way! Thanks for sharing your technique.
Beautiful! Please, show us how to set some baguette gemstones as well 😊
I just got an emerald ring and it’s bezel set but the back of the stone is completely covered by the metal (gold). This seems odd to me as all my other gemstone rings have at least a small opening behind the stone. I think it’s better with an open back because more light can shine through the stone. I’m wondering if this is something a jeweler could fix by removing the stone from the bezel setting, cutting a hole in the back of the setting and re-setting the stone. Or would it be too risky & damage the ring too much to attempt this? Great video! I think i’m going to try some jewelry making classes someday.
I'm interested in all different precious gemstones mounter & setter
how do you glue the bezel to the base to keep working on it? I find bezels so fiddly but I think it's because I go for thinner bezel strips and don't have anywhere to place them while I work on them
Hello, what kind of hammer do you use to knock around the wall?
I am finally doing jewelry work in my own shop. It has taken me 8 years to get to this point in my career. I have some videos of doing pyrography on my channel. I would like to start adding videos like this to it. What camera are you using for these amazing shots?
Most of my jewelry is bezel set including my engagement ring and band 😊 I love this setting so much. You do absolutely gorgeous work 🥰 you’re very talented 🥇🏆
Thank you so much! I love the look of bezel setting too :)
Nice job! A bright cut inside the bezel next to the stone gives a nice finishing touch on top of removing the excess metal covering (and hiding) the stone.
Which is a common problem in stones set by people who mostly learn by themselves.
What size is your ball bur? And what wheels are you using to polish up?
How did you adhere the silver bezel to the wood plate and how did you remove it after setting the stone?
Superglue and acetone he he he - it's simple but it works!
Omg look at all that silver wire in the back on the wall!!!!!! I’m drooling. You have all the nicest stuff! That vice is like 600-800 $
excellent tutorial!
Nice idea. Hard wark
Hi Lucy, how do you call the last “burr” you used around the bezel once it was all set? A kind of burnisher you used with the foredom. Thank you very much!
Great presentation! But it would be helpful if you added text or verbalized what was taking place. For instance, what’s holding the setting in place? What tools are being used? Walking the novice through each step. Things like that. I guess you could say.... look at it from the perspective of the newbie and create your content with that mind. Thanks!
We do have online classes available lovely where we go into all the juicy details :) we are currently closed for enrolment but you can sign up to the waitlist if you visit lucywalkerjewellery.com :)
I liked how their was no talking
Where can I buy this sort of equipment, I'm just starting out and it's it's dream to be able to make this.
Thank you Lucy! Brilliant and so helpful! Love your hair!
Brilliant quality of work and very well explained how to do this. Impressive.
Dawg she didn’t say anything after she started working lol
May I ask where you got the 1mm thick bezel? Thanks for all your videos, I love watching.
I suspect Lucy made the bezel from sheet. ;)
Thanks Michal - yeah it’s just 1mm sheet :)
Hi Lucy, what are you using to secure the bezel to that piece of wood?
I was wondering about that too.
Me too!
She usually attaches it with super glue
@@claudiabarlow7596 super glue? Not heard of that before? Does it dislodge with heat? And how do you remove the super glue from the bezel, sanding?
Debbie, I would think the question is obsolete as you wouldn't set the stone before soldering the bezel to your jewelry piece. I was about to ask the same then it struck me that she has it mounted to the wood for teaching purposes only. I'm only guessing as I'm a beginner.
Great work and hand control 👌👌👌
You make it look so easy. I'm doing this on a marquise faceted stone this afternoon. I still might be able to save it tomorrow. Fingers crossed. This definitely helped.
anyone know the name of the mini jewelers jackhammer she uses towards the end? I am new at this
0:50 what is that powder?
Thanks Lucy. So useful, and exciting.
Would you be able to tell me what it is you are using to grab/hold the gemstone please??
Great video. More please. Love your hair!
Beautifully Done Bravo!
Big Thanks Dear!
Beautiful work! Thank you!
Lovely job!
What is the trick with the super glue?? My setup looks about the same as yours, but even soaking in acetone won't dissolve the glue.??
Thank you very much for this video! I am only just wondering what kind of material you put the drills in before starting?
It's a lubricant.
@@WindsongVirtual Thank you!
Hello,
I hope you can help! How do you do rubover set a single round stone on signet rings? Should I use a flat top with straight edge stone and just glue it? Or a flat top with single bevel stone? If using a FTSB stone that is 1.5mm in height, do i need the bevel to be a bit higher than the stone? And what would the thickness of the bezel should be? Many thanks in advance!
Hi! are you using glue to hold the piece? What is the name please, and how do you remove it after? tks!!
Where should I get the tools send me the website link
Beautiful work! ❤️❤️❤️ You have a pair of amazingly steady hands and a very nice swivel vice and I bet that helps a lot. I'm not sure I'll ever be able to cut a seat so evenly free-handed. Anyway, that was a very nice demonstration. I suppose it's time for me to practice making tube bezel settings. Thank you. 👍🙂
Hi Lucy! Fantastic video as usual! Thank you for this. I’d like to know what the first measurement is that you take with the calipers? Is it from the table to the girdle? Thank you. Your friend, JM
I love love this thank you so much so detailed and precise 😍
I learned to cut the seat for this type of setting with a flat needle file, and this looks MUCH less time consuming (once you get the hang of it.)
That was fantastic!! Thank you for sharing 💕💕
Lucy, what brand divider are you using? Starrett? Thank you for EVERYTHING!
excellent, I saw a couple of tricks I shall use from now on, many thanks!
Very satisfying!!💍
Hola amiga cómo puedo adquirir o comprar esa máquina para engastar
So beautiful 😮
Great techniques 🙏
Brilliant work and instruction, inspiring!
I am a jewellery setter man ,,, but I like your video,,,,,,,, love form indian ❤️❤️
Where do you get the silver piece to create the settings?
Hay alguna forma de activar los subtitulos para otro idioma ? Gracias
Oh but Lucy, how were you measuring how low to go on the outer scribe? I had an emerald, and tried to scribe the inner bezel and damn it all, it left a scratch on the stone. Was my burnisher too small and pointy, because it for sure was smoother and polished. If I go bigger, I get flashing. I am trying to learn a bright cut, and I am signed up and took many classes. Hope to enjoy many more,
Very nice !
Thank-you for sharing!!
Bont travail l artiste
So professional
Muy buen trabajo Lucy
How did you make the bezel oval to fit the stone?
Is there anyway you would do a tutorial on making a rectangulart type bezel (rectangular gem with 8 sides) ? OR can you atleast tell me is it possible to make a bezel for this type of stone without using a bezel punch? Thanks
wow nice work !!
Amazing
What did you use to glue the bezel down ?
What's the name of the tool at 4:13
What gauge of silver used to make the bezel? And was it sterling or fine silver?
Calibre 6o ...LEY 950 PARA QUE ESTE MAS SUAVE Y COMA MAS RAPIDO LA FRESA
This is SUCH a helpful video. Thank you ao much.
Magical!!!
Gidday Lucy, love your tutorials, can u please tell me wat that impact stone setter is called please, I think I want one
This is a foredom hammer handpiece :) it certainly makes life easier!
Beautiful! May i ask what hammer handpiece you use. I'm looking for one as we speak. I only have a HF flexshaft so not sure what handpiece will work.
A regular reciprocating hammer does fine.
Brilliant video
Does anyone know the tool that was used to fold over the metal. Looked automatic
Hammer handpiece for the flex shaft
Love this video and technique Lucy, I’ve learned a lot from watching your videos, you have great skills and your videos are amazing!, Thank you so much!.
What microscope are you using on this video? Looks very helpful with stone setting :-)
What tool are you using to push the bezel over?
soldering iron i think i don't know specifically which brand is being used though.
Looks like a hammer handpiece for the flex shaft to me
Gracias LUCY APRENDI MUCHO eres genial
Fantastic!
Hello Lucy from Morocco.
Benomar
Hi good morning madam I like your work and so nice . But please tell me that gem stone name please
How receptive are you to ideas? I have a doozy.
About jewellery.
Amazing 🙏 thankyou
Beautiful 🥰 Thank you ❤️
thank you
If she uses super glue.....how do you detach it???
Acetone
@UCqfNOByGfcX7uioCGwLyO8Awhat about when you have a soft stone
I’m curious too …, can someone answer? How it got to fixed on wood plate? Thank you