Gold Bezels 3 Ways / Part 1: Open Back Bezel

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ม.ค. 2025
  • Take your jewelry skills up a notch and work in gold! In this 3-part series, studio jeweler and educator Paulette Werger joins us to demo three different ways to bezel set your stones and cabochons in gold.
    Here in Part 1, Paulette demonstrates how to choose and read your stones and decide the right bezel type before showing us how to make a gold open back bezel with step. Tools and materials used in this demo are listed down below.
    We recommend watching this series in full if you really want to dig into fabricating with gold and learn how to choose the right bezel for your project. Links:
    Part 2: Closed Back Gold Bezel and Backing: • Gold Bezels 3 Ways / P...
    Part 3: Gold Bezel with Argentium Silver Back: • Gold Bezels 3 Ways / P...
    This three-part series, Gold Bezels 3 Ways is sponsored by ‪@RioGrande1944‬. Check out our virtual and in-person classes and expand your gold and metalsmithing skills with Paulette and many other great educators at www.metalwerx.com. Scholarships are available!
    Featured in this video:
    Paulette Werger, Studio Jeweler and Educator: / paulettewerger
    Rio Grande: www.riogrande....
    Metalwerx Studio & School: metalwerx.com/
    Tools & Materials List:
    3" Steel Dividers | Item No. 116010 | www.riogrande....)
    18k Yellow Gold Strip | Item# 604541 | www.riogrande....
    Soft Metal Shears | Item No. 111232 | www.riogrande....
    Charcoal Soldering Block | Item# 502027 | www.riogrande....
    My-T-Flux | Item No. 504006 | www.riogrande....
    22k Yellow Gold Strip | Item No. 609216 | www.riogrande....
    18k Yellow Gold Round Wire | Item No. 604120 | www.riogrande....
    Half-Round/Flat Jaw Pliers | Item No. 111180 | www.riogrande....
    Needle-Nose Pliers | Item No. 111911 | www.riogrande....
    Barrette File, #4 Cut | Item No. 114717 | www.riogrande....
    File Handle, #4 | Item No. 114923 | www.riogrande....
    Paste Flux | Item No. 504084 | www.riogrande....
    18k Yellow Sheet Solder (Hard) | Item No. 604807 | www.riogrande....
    EVE Pumice Wheel, Medium | Item No. 332722 | www.riogrande....
    3M 3/4" Radial Bristle Disc, 80-Grit, Yellow | Item No. 332581 | www.riogrande....
    3M 9/16" Radial Bristle Disc, Pumice, Pink | Item No. 332574 | www.riogrande....
    Music Credits:
    Babylon Kevin MacLeod (incompetech.com)
    Licensed under Creative Commons: By Attribution 4.0
    creativecommon...
    Smooth Move Kevin MacLeod (incompetech.com)
    Licensed under Creative Commons: By Attribution 4.0
    creativecommon...

ความคิดเห็น • 22

  • @joangeisler6298
    @joangeisler6298 2 ปีที่แล้ว +4

    Paula is on my list as one of the best jewelry instructors out there.

    • @metalwerxstudio
      @metalwerxstudio  2 ปีที่แล้ว +1

      We totally agree! Such a great, patient, and thoughtful instructor!

  • @warmwomyn
    @warmwomyn หลายเดือนก่อน

    Great demo. Thanx!!!❤❤❤

  • @corystreat7605
    @corystreat7605 ปีที่แล้ว +1

    Very helpful and thank you much

  • @maxsmeraldi
    @maxsmeraldi 11 หลายเดือนก่อน

    Wonderfull job! I love it! You are a teacher of this job!😊❤

  • @tishsmiddy71
    @tishsmiddy71 ปีที่แล้ว +1

    Wow😊 great video ❤
    I live I Duval Jax,Fl. And I’m going to find a class in this ! Wish me luck ….😊

  • @lenastiward8657
    @lenastiward8657 ปีที่แล้ว

    I learned so much from watching this that I can apply to my silver as well. Great tips on the clipboard and black paper too. Excellent! Thank you!❤

  • @spaceradish4000
    @spaceradish4000 ปีที่แล้ว

    such a good demo! thank you!!

  • @pookieprincess5354
    @pookieprincess5354 ปีที่แล้ว +2

    Great video! This is very helpful.
    Once you place your stone into place at the end should you be pressing the gold edges down onto the cab?

    • @Vikki1980
      @Vikki1980 7 หลายเดือนก่อน

      I have the same question....

  • @richeyrich2203
    @richeyrich2203 ปีที่แล้ว +2

    Is the stone adhered to the bezel in anyway? Or is just a friction/tight fit?

    • @WindsongVirtual
      @WindsongVirtual 3 หลายเดือนก่อน

      When it's ready to set the stone, the top part of the bezel (the small bit that is higher than the slope of the stone) is pushed against the sides of the stone. This holds the stone in place.

    • @menow.
      @menow. 6 วันที่ผ่านมา

      @@WindsongVirtual Yes, but she doesn't show that. My problem is that I'm finding that 18k gold bezels are MUCH stiffer than the fine silver ones I'm used to using.

  • @marilynsouthern1612
    @marilynsouthern1612 ปีที่แล้ว

    Absolutely great video.❤ Just one question … when you are working with a rectangular stone do you use “round wire” or “square wire” for the bearing/step?

  • @DK-qy5lt
    @DK-qy5lt 8 หลายเดือนก่อน

    I read somewhere that it is not necessary to use borax when soldering on coal, as coal when heated gives off carbon, which does not allow the metal to oxidize.

    • @tyler5120
      @tyler5120 6 หลายเดือนก่อน

      If your coal is getting that hot so that it gives off enough carbon to stop oxidation, your metals are already wayyyyyy melted.

  • @carmi-wrld
    @carmi-wrld ปีที่แล้ว +1

    Sandpaper on a clipboard is genius

  • @donnaanasse5177
    @donnaanasse5177 10 หลายเดือนก่อน +1

    Nice content however, Rio does not allow beginners to purchase gold unless they have a business.

    • @metalwerxstudio
      @metalwerxstudio  6 หลายเดือนก่อน

      Hi Donna! Sorry for the delay in responding to your comment. You're correct, but you can access Rio Grade products through Metalwerx as a student! Anyone who takes a class with us (virtual or onsite) receives access to Rio Grande wholesale benefits through Metalwerx. You receive a link and a code when you take any class, along with other vendor deals.

    • @DNTurner94
      @DNTurner94 5 หลายเดือนก่อน

      @@metalwerxstudioare you no longer offering virtual classes?

  • @sting488
    @sting488 7 หลายเดือนก่อน +1

    Подскажите, какая толщина металла, из которого изготавливаете безель?

  • @cpayne1757
    @cpayne1757 26 วันที่ผ่านมา

    I using a clipboard is genius.